View Full Version : Dish Postioner
Help?
My motorised dish does not move without going into the tuner config, and manually changing the sat
in adavnce settings.
i've only got Thor, hotbird 13 east and Atsra2, is there a bug in the system, running open pli
how is it connected, is it diseqc or usals
how r ur tuners set.
Tuner A
Advanced
Sat Thor 0.8W
LNB 1
Diseqc 1.2
Long And lat settings
Usals Yes
Tuner B equal to A
My mistake. Usals are Yes on tuner A
sorry tony but can't get it...
r u having one lnb on the motorized dish and a fixed lnb with two lnb's or what coz u said u r having thor, hotbird and astra....
how many feeds/cables are connected to the box one or two
basilyoung
10-10-10, 00:24
on tuner "A" you need to activate all the sats you need
at the mo, thor is set, you need to go to tuner "A" setup, select say 19 east, select lnb 1 press ok then 13 east select lnb 1, press ok and so on, there is a simpler way ie; select 19 east, lnb 1 then 13 east, lnb 1 and what ever other sats you need, at the end, press ok, and that should sort your problem
baz
Thanks, tried this, still no good!!
i have twin lnb, tuned all sats onto lnb1, will move dish if i go into tuner A indivdually, will not tune into sats when a programme is selected from a different source.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.