Sicilian
12-06-13, 10:03
New Bootloader for Unibox HD1/HD1+
Added support for front USB port flashing.
How to flash new CFE ?
Just flash it like normal image. After installation box will bootup with new bootloader.
New flashing process as below.
FLASHING WITH CONFIRMATION:
VENTON-HDx Flashing Image using USB Pen Drive.
1. Unzip compressed file.
2. Copy the "venton-hdx" folder to a USB Pen Drive.
3. Power off receiver with the mains switch on the rear.
4. Connect USB Pen Drive.
5. Power on receiver with the mains switch on the rear.
6. Press the ARROW UP Button on the front panel to flash.
Update in progress.
The receiver will reboot automatically after update.
FLASHING WITHOUT CONFIRMATION:
VENTON-HDx Flashing Image using USB Pen Drive.
1. Unzip compressed file.
2. Copy the "venton-hdx" folder to a USB Pen Drive.
3. Change name of the file in folder "venton-hdx" file "noforce" to "force"
4. Power off receiver with the mains switch on the rear.
5. Connect USB Pen Drive.
5. Power on receiver with the mains switch on the rear.
6. Reciver will automatically flash.
Update in progress.
The receiver will ask You to remove USB and reboot box by switching it on and off after update.
Venton HD1/HD1+
Added support for front USB port flashing.
How to flash new CFE ?
Just flash it like normal image. After installation box will bootup with new bootloader.
New flashing process as below.
FLASHING WITH CONFIRMATION:
VENTON-HDx Flashing Image using USB Pen Drive.
1. Unzip compressed file.
2. Copy the "venton-hdx" folder to a USB Pen Drive.
3. Power off receiver with the mains switch on the rear.
4. Connect USB Pen Drive.
5. Power on receiver with the mains switch on the rear.
6. Press the ARROW UP Button on the front panel to flash.
Update in progress.
The receiver will reboot automatically after update.
FLASHING WITHOUT CONFIRMATION:
VENTON-HDx Flashing Image using USB Pen Drive.
1. Unzip compressed file.
2. Copy the "venton-hdx" folder to a USB Pen Drive.
3. Change name of the file in folder "venton-hdx" file "noforce" to "force"
4. Power off receiver with the mains switch on the rear.
5. Connect USB Pen Drive.
5. Power on receiver with the mains switch on the rear.
6. Reciver will automatically flash.
Update in progress.
The receiver will ask You to remove USB and reboot box by switching it on and off after update.
Venton HD1/HD1+