Set top box cable question

[DogsDinner]

I want to run a coax cable from my VU+ Ultimo to the TV upstairs so I can watch from the box in two rooms. The VU+ doesnt have a coax out port, but I found this from the sponsor ...


http://www.world-of-satellite.co.uk/VU-Uno-Ultimo-Plug-and-Play-Hybrid-DVB-C-T-Tuner-Module?filter_name=vu+&page=2

Will this do the job? The VU+ is using the DVB-S tuners for satellite TV and it this video output I wish to send?

Thanks

[Larry-G]

The out ports on the Ultimo's tuners are for looping the signal out to another receiver, you can output it to a TV unless that TV has a built in satellite receiver of it's own and even then it would only be passing the satellite signal not any content form the ultimo it self.

[DogsDinner]

What about with the terrestrial tuner in the link?

[Larry-G]

Thats a DVB C/T tuner ( combined terrestrial / cable ) it's not have a RF modulator so it cant pass a signal on in the way that a VCR could for example.

[DogsDinner]

Thats a DVB C/T tuner ( combined terrestrial / cable ) it's not have a RF modulator so it cant pass a signal on in the way that a VCR could for example.

Would this do the trick? ...


http://www.world-of-satellite.co.uk/Mercury-Universal-RF-Video-Modulator-ILS102?filter_name=RF

[Larry-G]

Not sure to be honest as i have never used one, my entire house is wired through a 24 port network switch which is how i stream content around the various rooms etc.