PDA

View Full Version : Sbox?


superplakis
07-10-10, 20:26
How configure sbox?

sci0?

error :(
superplakis
08-10-10, 10:49
nothing? to rescue me?
superplakis
10-10-10, 19:07
nothing support to this emu?
Stanman
10-10-10, 19:54
Can you please provide more info and some one will help but difficult to say what your issue is on the details you have given this far.
superplakis
10-10-10, 20:10
sbox this composed by 3 files:
usr/bin/sbox.conf 755
usr/bin/sbox.mips 755
usr/bin/users.sbox 755
but my config file by image DE1.3.3.f or OpenPli1.0 dont work with this image.....

¿?
superplakis
11-10-10, 17:38
how starting my image responded

18:36:06 sbox: Viewing Pay TV without a valid subscription is illegal
18:36:06
18:36:06 Wellcome to sBox (for MIPS)
18:36:06 Version: 0.0.4-7 (19/03/2010 #4)
18:36:06 WebPage: http://www.sboxobs.tk
18:36:06
18:36:06 sbox: checking for /usr/bin/sbox.conf... OK
18:36:06 io: error opening /dev/sci0
root@bm750:~# 18:36:06 warning: no cards? no party
how is name for dev cardreader slot1?

thx.
superplakis
11-10-10, 18:37
ok funciona!!!
but the users.sbox dont work :S
superplakis
11-10-10, 18:51
yes FUNCIONA!!!!!!!!!!

thats ok!!!! sbox and vix no problem!
superplakis
11-10-10, 22:08
the configuration is = at all images
install 3 files tu /usr/bin/
sbox.conf / sbox.mips / users.sbox

sbox.conf:

[main]
server_only=1 # 0=emu+newcamd server 1=only newcamd server
log=0 # 1=no log 1=log to /tmp/sbox.log //ALWAYS USE 0//
userspath=/usr/bin/users.sbox # users list
webinterface=1 # 1=web interface on 0=web interface off
webport=81 # web interface port

[slot0]
active=1 # 0=inactive 1=active
sci=/dev/sci0 # lower
ncdserver=1 # 0=newcamd server off 1=newcamd server on
deskey=0102030405060708091011121314 # newcamd deskey
port=xxxxx # newcamd port
mhz=357 # Mhz for card in this reader, ONLY WORKS ON INTERNAL CARDREADER. Example: mhz=357, mhz=368
reader=1

#Seca Example
[CCCCCCCC] # seca camid (4 bytes)
ok_view=0 # if ok_view=1 sbox simulates the "ok view this season" on seca smartcards
emm=0 # 0=accept all 1=block emms 2=block emmu
4=block emmg
portlist=1 # use portlist or no
portlistpath=/etc/keys/xxxxx.list # path from port.list


to start of telnet

/usr/bin/sbox.mips