View Full Version : Sbox?
superplakis
07-10-10, 20:26
How configure sbox?
sci0?
error :(
superplakis
08-10-10, 10:49
nothing? to rescue me?
superplakis
10-10-10, 19:07
nothing support to this emu?
Can you please provide more info and some one will help but difficult to say what your issue is on the details you have given this far.
superplakis
10-10-10, 20:10
sbox this composed by 3 files:
usr/bin/sbox.conf 755
usr/bin/sbox.mips 755
usr/bin/users.sbox 755
but my config file by image DE1.3.3.f or OpenPli1.0 dont work with this image.....
¿?
superplakis
11-10-10, 17:38
how starting my image responded
18:36:06 sbox: Viewing Pay TV without a valid subscription is illegal
18:36:06
18:36:06 Wellcome to sBox (for MIPS)
18:36:06 Version: 0.0.4-7 (19/03/2010 #4)
18:36:06 WebPage: http://www.sboxobs.tk
18:36:06
18:36:06 sbox: checking for /usr/bin/sbox.conf... OK
18:36:06 io: error opening /dev/sci0
root@bm750:~# 18:36:06 warning: no cards? no party
how is name for dev cardreader slot1?
thx.
superplakis
11-10-10, 18:37
ok funciona!!!
but the users.sbox dont work :S
superplakis
11-10-10, 18:51
yes FUNCIONA!!!!!!!!!!
thats ok!!!! sbox and vix no problem!
superplakis
11-10-10, 22:08
the configuration is = at all images
install 3 files tu /usr/bin/
sbox.conf / sbox.mips / users.sbox
sbox.conf:
[main]
server_only=1 # 0=emu+newcamd server 1=only newcamd server
log=0 # 1=no log 1=log to /tmp/sbox.log //ALWAYS USE 0//
userspath=/usr/bin/users.sbox # users list
webinterface=1 # 1=web interface on 0=web interface off
webport=81 # web interface port
[slot0]
active=1 # 0=inactive 1=active
sci=/dev/sci0 # lower
ncdserver=1 # 0=newcamd server off 1=newcamd server on
deskey=0102030405060708091011121314 # newcamd deskey
port=xxxxx # newcamd port
mhz=357 # Mhz for card in this reader, ONLY WORKS ON INTERNAL CARDREADER. Example: mhz=357, mhz=368
reader=1
#Seca Example
[CCCCCCCC] # seca camid (4 bytes)
ok_view=0 # if ok_view=1 sbox simulates the "ok view this season" on seca smartcards
emm=0 # 0=accept all 1=block emms 2=block emmu
4=block emmg
portlist=1 # use portlist or no
portlistpath=/etc/keys/xxxxx.list # path from port.list
to start of telnet
/usr/bin/sbox.mips
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.