OpenVIX build 667 and 668 fails on TM-2T

[kanwar]

Hello everyone,

I just thought I'd let you guys know (as I just tried flash updating) that build 667 and 668 do not boot after flashing on the tm-2t box. http://www.world-of-satellite.com/enigma2/openvix/index.php?dir=TM-2T/.

The flash happens successfully but when you reboot the box it goes to the 'OPENVIX' black screen for a moment, then the screen goes blank. The receiver continues saying 'booting' but nothing happens. I hope this can be addressed. I am not sure how to provide more details but I hope this is of help to admins and the technical team.

EDIT: Build 666 has also failed in a similar manner.

Thanks.

[kanwar]

Oh dear, looks like this may not be a firmware update problem after all!

I just flashed build 653 (which has previously worked) and am still getting the same error. It's stuck on 'booting' with a completely blank screen. Help!

[TK4|2|1]

What percentage of loading is it getting too?
If it gets to 99% try pressing the menu button. If the menu comes up its waiting for you to set it up or load a backup.
Also unplug all devices (usb's etc) and Ethernet cable when flashing, see if that helps.

Sent using sorcery and the magic interwebs