Hi help please

[Louie8888]

Hi , can anyone help as I have this Tm up and running but it keeps coming up with timer sanit error
Like if this system only has one tuner can anyone help me out with alway to test and findout if both tuners are running As I thought that you can record more than one side sorry as this is new to me

Thank you all for a good site .

[judge]

Take a screenshot (http://www.world-of-satellite.com/showthread.php?12554-Tutorial-How-to-make-a-screenshot-dump-from-your-satellite-receiver&p=90834&viewfull=1#post90834) of your timers (short yellow) and auto-timers (long yellow) screens & post them here.
Also, how are your tuners configured?

[Louie8888]

Ok Iam just not sure both are active is there any easy way to test or see in a menus thank
You all for your help in this matter

[judge]

Menu -> Setup -> Service Searching -> Tuner Configuration

[Louie8888]

Once again thank you . I will look as I am not sure that. I have it running with both .

[Louie8888]

Hi guys this has a tuner bcm7335 single Sats ast 1n /2a Dvb
Tuner. B bcm7335 equal to tuner a

So anyone can tell me more thank you

[abu baniaz]

Can you confirm you have two wires from lnb to receiver? If so, set them up individually. Don't use the "equal to tuner a"

[Louie8888]

Hi yes I have two cables from the dish

[Louie8888]

Hi. Can you tell me i should not use "equal to tuner a" ?
As I don't wish to reset all the The box

[Larry-G]

Hi. Can you tell me i should not use "equal to tuner a" ?
As I don't wish to reset all the The box

if you have two cables from the same fixed dish them set both tuners to

Simple
Single
28.2 east
No.

that is assuming your dish is pointing towards sky uk.

[Louie8888]

Hi , if I set it like this will I keep all the setup?

[abu baniaz]

Hi , if I set it like this will I keep all the setup?
It will be fine. You wont have to go through the setup process again.

[Louie8888]

Ok guys thanks is there any way I can test that both are working together ? And how many recordings can you make at the same time once again thank you all for your help in this matter

[Rob van der Does]

'Equal to' sometimes gives problems; better set it to the proper settings to be sure.

[abu baniaz]

Ok guys thanks is there any way I can test that both are working together ? And how many recordings can you make at the same time once again thank you all for your help in this matter
Start a recording and then go to the chanenl list. If no channels are greyed out, then both tuners are independent.

Excluding the timer recording issue, you can record several channels on the same TP on each tuner.
Alternatively, two web interface viewings and a third watching TV proper although you get issues on HD chanels as network suffers.

[Louie8888]

Wow your telling me that you can web interface viewings ?. Now that's cool

[Rob van der Does]

Start a recording and then go to the chanenl list. If no channels are greyed out, then both tuners are independent.
Or better said: Enigma thinks so if they're not 'greyed out'.
Best way is to use the satfinder and see if both tuners can 'see' all satellites.

[Louie8888]

Hi , is there a good place to findout about web interface viewings ? As that sound good

[abu baniaz]

Enter the IP address of the receiver in your web browser. I use VLC player to open the m3u file. I hope the pictures are self explanatory.

There are also apps for smartphones/tablets too. Dreamdroid/Vu+player are two examples.

[Louie8888]

Thank you For your help

[Louie8888]

Hi , all thank you for your help but I still can only record 2 sides even if there on the same transponder any one please ,

[abu baniaz]

What are your tuner settings?

[Louie8888]

Hi I have bcm735 Dvb s2
Single both have the same just I thought that you can record more than 2 sides

[abu baniaz]

You can record more than two channels if on same tp.

Which channels are you trying to record?

[Louie8888]

Hi, channel 4, itv,itv4 then it comes up tuner not available


Thanks for all this info

[Larry-G]

Hi, channel 4, itv,itv4 then it comes up tuner not available


Thanks for all this info

Very likely because they are all on different transponders, you could try setting a recording on CH 4 and ITV 4 then pull up the channel list to see what if any of the regional ITV 1 channels are available as they are split between two transponders some of which share the same transponder with ITV 4. any channel that you can watch will be shown as normal all those that you cant will be grayed out. If you really want to watch or record from three totally different transponders you would need a receiver with three separate tuner cards.

[Louie8888]

Ok thank you