TM Single specs query

[Slammed Mind]

Hey guys,

I have a TM single a few weeks and love the box but noticed something.

On WOS website the box is advertised as having the following spec:

2 Gbit (256mb) flash and 3Gbit (384mb) DDR RAM

I'm currently running vix and just went into the memory menu and seen the following

25616

From the screenshot above it appears the Tm single has only 166mb of flash (not 256mb) and 138mb of RAM (not 384mb)

Or am I missing something?

[marty]

The Single (as do all E2 boxes) will have taken some of the memory for other things ;)

[Slammed Mind]

The Single (as do all E2 boxes) will have taken some of the memory for other things ;)

I undrstand that mate but the TM single displays the 166mb of flash as the total amount of flash and the 138mb of RAM as the total amount of RAM as you can see from the screenshot

[Larry-G]

I undrstand that mate but the TM single displays the 166mb of flash as the total amount of flash and the 138mb of RAM as the total amount of RAM as you can see from the screenshot

There is a telnet command that will show you for certain what the box has but I cant think of it at present.

Sent from my GT-I9300 using Tapatalk 2

[pooface]

There is a telnet command that will show you for certain what the box has but I cant think of it at present.

Sent from my GT-I9300 using Tapatalk 2

I think it's just in boot logs that you can see total...

The about screens inky site you what is available to Linux (some is taken for graphics etc and not available for Linux to use)

Sent from my GT-I9300 using Tapatalk 2

[abu baniaz]

I think it's just in boot logs that you can see total...

What do I look for?

[pooface]

What do I look for?

Here's an example of boot log taken from the silo yesterday



BCM97325B0 CFE v2.27, CFE core v2.12, Endian Mode: Little
Build Date: Wed May 18 10:18:50 2011 (shcheong@ncsh)
Copyright (C) Broadcom Corporation.


DDR Freq: 398MHz
CPU speed: 333MHz
Memory Config: 32-bit UMA
Device Tech: 1Gb
Total memory: 256MB
Total flash: 128MB


Sent from my GT-I9300 using Tapatalk 2

[abu baniaz]

BCM73350010
012
Shmoo Version=2.2

MEMC-00000000 RW=0000000E WW=0000004A G=00000001 R=00000007 W=00000016
MEMC-00000001 RW=0000000B WW=00000047 G=00000001 R=00000007 W=0000000B #$
3
COPY CODE
COMPARE CODE
4567

BCM97335B0 CFE v2.21, CFE core v2.12, Endian Mode: Little
Build Date: Mon Oct 8 20:22:39 KST 2012 (iqteam@theone-virtual-machine)
Copyright (C) Broadcom Corporation.

Enabling NAND flash at CS1, NOR flash at CS0
NAND Flash size = 256MB
DDR Freq: 395MHz
CPU speed: 405MHz
Memory Config: 32+16 non-UMA
Device Tech: 1Gb
Total memory: 384MB
Boot Device: NOR
Total flash: 8MB


Bear in mind that it is a dual operating system. Only of we had option of deleting the one we are not going to use.

[pooface]

BCM73350010
012
Shmoo Version=2.2

MEMC-00000000 RW=0000000E WW=0000004A G=00000001 R=00000007 W=00000016
MEMC-00000001 RW=0000000B WW=00000047 G=00000001 R=00000007 W=0000000B #$
3
COPY CODE
COMPARE CODE
4567

BCM97335B0 CFE v2.21, CFE core v2.12, Endian Mode: Little
Build Date: Mon Oct 8 20:22:39 KST 2012 (iqteam@theone-virtual-machine)
Copyright (C) Broadcom Corporation.

Enabling NAND flash at CS1, NOR flash at CS0
NAND Flash size = 256MB
DDR Freq: 395MHz
CPU speed: 405MHz
Memory Config: 32+16 non-UMA
Device Tech: 1Gb
Total memory: 384MB
Boot Device: NOR
Total flash: 8MB


Bear in mind that it is a dual operating system. Only of we had option of deleting the one we are not going to use.

That shows it has the specs shown in first post tho...

Sent from my GT-I9300 using Tapatalk 2

[Slammed Mind]

how can i access this information on my TM single guys?

[Larry-G]

The only way to to create a bootlog as the receiver is booting up with a rs232 null modem cable and a putty session.

[abu baniaz]

@Slammed Mind, the logs I posted were from a TM Single.