error updating my xtrend et5x00

[jonc]

Just updated to the new image and my box just keep restarting with a error screen.It just keeps looping

[khan888]

What image was you previously on and what have you updated to?

[Larry-G]

as above, which image ( and build number ) did you update from ??. This appears to be a crash loop, if this is the case you should still have FTP access, if you do please log in and retrieve some of the generated crash logs from /home/root/logs. these may help us in finding out what is going wrong for you.

[jonc]

Am not sure as its been awhile since i last updated what i had to do was down a earlier version -3.0.626 and it came on with that

[khan888]

If you came from Vix 2.4 did you do a clean install on 3.0 and not restore from an old backup?

[jonc]

No clean install

[TK4|2|1]

Bootloader??


Sent using sorcery and the magic interwebs

[judge]

Try build 649, latest stable build currently available on http://www.world-of-satellite.com/enigma2/openvix/index.php?dir=ET-5x00/ for your box.
Don't restore any backups & let us know how it goes...

You might also need the latest bootloader (http://www.world-of-satellite.com/enigma2/openvix/index.php?dir=Bootloaders/ET-5x00/)?

[jonc]

Try build 649, latest stable build currently available on http://www.world-of-satellite.com/enigma2/openvix/index.php?dir=ET-5x00/ for your box.
Don't restore any backups & let us know how it goes...

You might also need the latest bootloader (http://www.world-of-satellite.com/enigma2/openvix/index.php?dir=Bootloaders/ET-5x00/)?
Thats the first one I tried but i will try it again tomorrow

[jonc]

Tried that and doing the same loop boot error not really sure if am getting the right log but this is the only upto date part of it
"Apr 14 14:26:04 et5x00 daemon.notice ntpdate[511]: step time server 94.125.129.7 offset 1365942338.428551 sec"
Before I installed the new update i did get this from it but am not sure if its right

--------------------------------------------------------------------------------


<?xml version="1.0" encoding="utf-8"?>
<openvix>
<enigma2>
<crashdate>Sat Apr 13 17:42:52 2013</crashdate>
<compiledate>Apr 8 2013</compiledate>
<contactemail>vixlogs@world-of-satellite.com</contactemail>
<!-- Please email this crashlog to above address -->
<skin>ViX-Night-HD/skin.xml</skin>
<sourcedate>2013-04-08</sourcedate>
<version>3.0.0</version>
</enigma2>
<image>
<stbmodel>et5000</stbmodel>
<kernelversion>
<![CDATA[
Linux et5x00 3.6.0 #1 SMP Tue Mar 12 22:53:52 GMT 2013 mips GNU/Linux
]]>
</kernelversion>
<kernelcmdline> bmem=130M ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs console=ttyS0,115200n8</kernelcmdline>
<nimsockets>NIM Socket 0:</nimsockets>
<imageversion>
<![CDATA[
box_type=et5x00
build_type=0
version=3.0
build=649
drivers=20121215
date=20130408111958
comment=ViX
target=9
creator=openViX
url=http://www.xtrend-support.co.uk
catalog=http://www.xtrend-support.co.uk
]]>
</imageversion>
<imageissue>
<![CDATA[
Welcome to OpenViX for %h
openvix 3.0 %h

]]>
</imageissue>
</image>
<software>
<enigma2software>
<![CDATA[
enigma2 - 2.8+git13592+b629a1f-r93
enigma2-fonts - 2010.11.14-r93
enigma2-plugin-extensions-audiosync - git5246+1e387c0-r29
enigma2-plugin-extensions-autotimer - git5246+1e387c0-r29
enigma2-plugin-extensions-epgsearch - git5246+1e387c0-r29
enigma2-plugin-extensions-imdb - git5246+1e387c0-r29
enigma2-plugin-extensions-mediascanner - 2.8+git13592+b629a1f-r93
enigma2-plugin-extensions-openwebif - 0.1+git503+263fe4d-r20.72
enigma2-plugin-extensions-pictureplayer - 2.8+git13592+b629a1f-r93
enigma2-plugin-extensions-xmltvimport - 1.0+git84+9f6e409-r29
enigma2-plugin-extensions-xmltvimport-rytec - 1.0-r2
enigma2-plugin-skins-vix-night-hd - 2.0+git1673+d23a473-r11
enigma2-plugin-systemplugins-autobouquetsmaker - git333+bd2c4ad-r47
enigma2-plugin-systemplugins-blindscan - git333+bd2c4ad-r47
enigma2-plugin-systemplugins-crossepg - 0.6.2+git356+0853530-r6
enigma2-plugin-systemplugins-hdmicec - 2.8+git13592+b629a1f-r93
enigma2-plugin-systemplugins-hotplug - 2.8+git13592+b629a1f-r93
enigma2-plugin-systemplugins-mphelp - git5246+1e387c0-r29
enigma2-plugin-systemplugins-networkbrowser - git5246+1e387c0-r29
enigma2-plugin-systemplugins-networkwizard - 2.8+git13592+b629a1f-r93
enigma2-plugin-systemplugins-positionersetup - 2.8+git13592+b629a1f-r93
enigma2-plugin-systemplugins-remotecontrolcode - git333+bd2c4ad-r47
enigma2-plugin-systemplugins-satfinder - 2.8+git13592+b629a1f-r93
enigma2-plugin-systemplugins-toolkit - git5246+1e387c0-r29
enigma2-plugin-systemplugins-videoenhancement - 2.8+git13592+b629a1f-r93
enigma2-plugin-systemplugins-videomode - 2.8+git13592+b629a1f-r93
enigma2-plugin-systemplugins-wirelesslan - 2.8+git13592+b629a1f-r93
enigma2-plugin-vix-core - 2.1+git522+58bffb0-r10
enigma2-plugins - git5246+1e387c0-r29
enigma2-skindefault - 1.0+git25+41f3b07-r14
enigma2-spinner - 1.0-r0
]]>
</enigma2software>
<xtrendsoftware>
<![CDATA[
et-blindscan-dvbs-utils - 1.0-r1
et-dvb-modules-et5x00 - 3.6.0+20121215-r2
et-fpupdate-et5x00 - 15-r4
]]>
</xtrendsoftware>
<gstreamersoftware>
<![CDATA[
gst-plugin-dvbmediasink - 0.10.0+git16+aeeed7f-r4
gst-plugin-subsink - 0.10.0+git5+0cb20d6-r0
gst-plugins-bad - 0.10.23-r5
gst-plugins-bad-cdxaparse - 0.10.23-r5
gst-plugins-bad-mms - 0.10.23-r5
gst-plugins-bad-mpegdemux - 0.10.23-r5
gst-plugins-bad-rtmp - 0.10.23-r5
gst-plugins-bad-vcdsrc - 0.10.23-r5
gst-plugins-base - 0.10.36-r6
gst-plugins-base-alsa - 0.10.36-r6
gst-plugins-base-app - 0.10.36-r6
gst-plugins-base-audioconvert - 0.10.36-r6
gst-plugins-base-audioresample - 0.10.36-r6
gst-plugins-base-decodebin - 0.10.36-r6
gst-plugins-base-decodebin2 - 0.10.36-r6
gst-plugins-base-ogg - 0.10.36-r6
gst-plugins-base-playbin - 0.10.36-r6
gst-plugins-base-subparse - 0.10.36-r6
gst-plugins-base-typefindfunctions - 0.10.36-r6
gst-plugins-base-vorbis - 0.10.36-r6
gst-plugins-good - 0.10.31-r4
gst-plugins-good-apetag - 0.10.31-r4
gst-plugins-good-audioparsers - 0.10.31-r4
gst-plugins-good-autodetect - 0.10.31-r4
gst-plugins-good-avi - 0.10.31-r4
gst-plugins-good-flac - 0.10.31-r4
gst-plugins-good-flv - 0.10.31-r4
gst-plugins-good-icydemux - 0.10.31-r4
gst-plugins-good-id3demux - 0.10.31-r4
gst-plugins-good-isomp4 - 0.10.31-r4
gst-plugins-good-matroska - 0.10.31-r4
gst-plugins-good-rtp - 0.10.31-r4
gst-plugins-good-rtpmanager - 0.10.31-r4
gst-plugins-good-rtsp - 0.10.31-r4
gst-plugins-good-souphttpsrc - 0.10.31-r4
gst-plugins-good-udp - 0.10.31-r4
gst-plugins-good-wavparse - 0.10.31-r4
gst-plugins-ugly - 0.10.19-r4
gst-plugins-ugly-amrnb - 0.10.19-r4
gst-plugins-ugly-amrwbdec - 0.10.19-r4
gst-plugins-ugly-asf - 0.10.19-r4
gst-plugins-ugly-cdio - 0.10.19-r4
gst-plugins-ugly-dvdsub - 0.10.19-r4
gst-plugins-ugly-mad - 0.10.19-r4
gst-plugins-ugly-mpegaudioparse - 0.10.19-r4
gst-plugins-ugly-mpegstream - 0.10.19-r4
gstreamer - 0.10.36-r2
]]>
</gstreamersoftware>
</software>
<crashlogs>
<enigma2crashlog>
<![CDATA[
rotor running -1, idle -1, delta 15
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 15
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 15
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 15
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 15
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 15
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 15
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 15
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 15
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 15
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 15
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 15
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 15
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 15
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 15
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 15
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 15
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 15
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 15
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 15
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 15
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 15
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 15
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 15
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 15
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 15
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 15
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 15
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 15
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 15
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 15
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 15
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 15
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 15
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 15
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 15
[SEC] rotor not running... reset counter.. increase timeout
[SEC] rotor timout
set sequence pos 2
[SEC] no more rotor retrys
set sequence pos 10
[SEC] update current rotorparams 0 0001 282
[SEC] setVoltage 2
[SEC] sleep 10ms
[SEC] setTone 1
[SEC] sleep 10ms
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
(0)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x751110e0 running
[eEPGCache] channel 0x751110e0 running
stop release channel timer
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (0200), and 1 audio stream(s) (0294), and the pcr pid is 0200, and the text pid is 090a
allocate demux
decoder state: play, vpid=512, apid=660
DMX_SET_PES_FILTER(0x200) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x294) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(0) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 1 - ok
DMX_SET_PES_FILTER(0x200) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x90a) - ttx - ok
DEMUX_START - ttx - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
AUDIO_CHANNEL_SELECT(0) - ok
disable teletext subtitles
[eDVBCAService] new service 1:0:19:F1A:7D5:2:11A0000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:19:F1A:7D5:2:11A0000:0:0:0:
PATready
use pmtpid 0104 for service_id 0f1a
[eDVBLocalTimerHandler] dont have correction.. set Transponder Diff
[eDVBLocalTimerHandler] update RTC
[eDVBLocalTimerHandler] time update to 17:36:10
[eDVBLocalTimerHandler] m_time_difference is 1365870912
[eDVBLocalTimerHandler] set Linux Time
[EPGC] time updated.. start EPG Mainloop
[SEC] set dynamic current limiting
[EPGC] 8 events read from /etc/enigma2/epg.dat
[EPGC] next update in 2 sec
eventNewProgramInfo 0 0
have 1 video stream(s) (0200), and 2 audio stream(s) (0280, 0294), and the pcr pid is 0200, and the text pid is 090a
decoder state: play, vpid=512, apid=660
[eDVBCIInterfaces] gotPMT
sdt update done!
[EPGC] start caching events(1365870972)
[SoftcamManager] Couldn't find MGcamd.1.35a running, Starting MGcamd.1.35a
[SoftcamManager] Couldn't find CCcam.2.2.1 running, Starting CCcam.2.2.1
job Components.Task.Job name=SoftcamCheck #tasks=1 completed with [] in None
child has terminated
pipes closed
[EPGC] abort non avail schedule reading
[EPGC] abort non avail schedule other reading
[EPGC] abort non avail netmed schedule reading
[EPGC] abort non avail netmed schedule other reading
[EPGC] abort non avail FreeSat schedule_other reading
[EPGC] abort non avail viasat reading
[EPGC] nownext finished(1365870979)
[EPGC] stop caching events(1365870979)
[EPGC] next update in 60 min
VIDEO_GET_EVENT - ok
VIDEO_GET_EVENT - ok
ECM DATA: ['system: Videoguard (News Datacom)\n', 'caid: 0x963\n', 'provider: Unknown\n', 'provid: 0x000\n', 'pid: 0x50a\n', 'using: newcamd\n', 'address: wearewhoweare.is-certified.com:16050\n', 'hops: 1\n', 'ecm time: 0.033\n']
ECM LINE: system: Videoguard (News Datacom)

ECM LINE: caid: 0x963

ECM LINE: provider: Unknown

ECM LINE: provid: 0x000

ECM LINE: pid: 0x50a

ECM LINE: using: newcamd

ECM LINE: address: wearewhoweare.is-certified.com:16050

ECM LINE: hops: 1

ECM LINE: ecm time: 0.033

VIDEO_GET_EVENT - ok
executing opkg --add-dest /:/ update
job Components.Task.Job name=OnlineVersionCheck #tasks=1 completed with [] in None
child has terminated
pipes closed
executing opkg --add-dest /:/ list-upgradable
poll: unhandled POLLERR/HUP/NVAL for fd 61(16)
child has terminated
pipes closed
[OnlineVersionCheck] 0 Updates available
poll: unhandled POLLERR/HUP/NVAL for fd 61(16)
action -> InfobarChannelSelection switchChannelUp
action -> OkCancelActions cancel
action -> InfobarChannelSelection switchChannelUp
action -> OkCancelActions cancel
action -> InfobarMenuActions mainMenu
loading mainmenu XML...
PluginBrowser PluginBrowser
action -> OkCancelActions ok
okbuttonClick
action -> WizardActions back
action -> OkCancelActions ok
okbuttonClick
ParentalControlSetup ParentalControlSetup
SoftwareUpdate UpdatePlugin
action -> OkCancelActions ok
okbuttonClick
InputDeviceSetup InputDeviceSelection
LanguageSelection LanguageSelection
Recordings RecordingSettings
SkinSelector SkinSelector
Timershift TimeshiftSettings
action -> OkCancelActions ok
okbuttonClick
action -> SetupActions cancel
action -> OkCancelActions ok
okbuttonClick
NetworkSetup NetworkAdapterSelection
NetworkSetup NetworkMountsMenu
NetworkSetup NetworkAfp
NetworkSetup NetworkFtp
NetworkSetup NetworkInadyn
NetworkSetup NetworkMiniDLNA
NetworkSetup NetworkNfs
NetworkSetup NetworkOpenvpn
NetworkSetup NetworkSamba
NetworkSetup NetworkTelnet
NetworkSetup NetworkuShare
action -> OkCancelActions ok
okbuttonClick
[SKIN] No skin to read...
action -> WizardActions ok
action -> OkCancelActions ok
okbuttonClick
[SKIN] No skin to read...
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 61(16)
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 61(16)
action -> MsgBoxActions ok
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 61(16)
action -> WizardActions down
unknown action WizardActions/down! typo in keymap?
action -> WizardActions down
unknown action WizardActions/down! typo in keymap?
action -> WizardActions back
action -> OkCancelActions ok
okbuttonClick
[SKIN] No skin to read...
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 61(16)
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 61(16)
action -> DirectionActions down
action -> MsgBoxActions ok
action -> OkCancelActions ok
okbuttonClick
action -> WizardActions ok
child has terminated
pipes closed
[eBatch] retval=255, cmds left=0, data:
mount: mounting //192.168.1.102/et5x00 on /media/net/Sharename failed: Invalid argument

Failed to remove /media/net/Sharename Error: [Errno 93] Directory not empty: '/media/net/Sharename'
poll: unhandled POLLERR/HUP/NVAL for fd 61(16)
action -> OkCancelActions OK
unknown action OkCancelActions/OK! typo in keymap?
action -> WizardActions down
action -> WizardActions ok
action -> WizardActions back
action -> WizardActions down
action -> WizardActions ok
[Networkbrowser] Getting fresh network list
main thread is non-idle! display spinner!
ERROR reading PES (fd=48) - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 48(8)
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 62(16)
[SoftcamManager] MGcamd.1.35a already running
[SoftcamManager] CCcam.2.2.1 already running
[SoftcamManager] Telnet info not allowed, can not check if frozen
job Components.Task.Job name=SoftcamCheck #tasks=1 completed with [] in None
action -> WizardActions ok
action -> WizardActions ok
action -> WizardActions back
action -> WizardActions back
action -> OkCancelActions ok
okbuttonClick
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 62(16)
action -> WizardActions ok
[Console] killing: <eConsoleImpl.eConsoleAppContainer object at 0x17c33f0>
user kill(SIGKILL) console App
pipes closed
[Console] killing: <eConsoleImpl.eConsoleAppContainer object at 0x1f99b30>
user kill(SIGKILL) console App
pipes closed
[Console] killing: <eConsoleImpl.eConsoleAppContainer object at 0x17c34d0>
user kill(SIGKILL) console App
pipes closed
[iStatus] killing self.WlanConsole
action -> SetupActions cancel
unknown action SetupActions/cancel! typo in keymap?
action -> SetupActions cancel
unknown action SetupActions/cancel! typo in keymap?
action -> OkCancelActions cancel
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 62(16)
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 62(16)
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 68(16)
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 65(16)
action -> WizardActions up
action -> WizardActions ok
('en_GB', ('English (UK)', 'en', 'GB'))
Screen <class 'Plugins.SystemPlugins.NetworkWizard.NetworkWizard .NetworkWizard'>(('eth0',), {}): <type 'exceptions.IOError'>
Traceback (most recent call last):
File "/usr/lib/enigma2/python/mytest.py", line 248, in create
return screen(self, *arguments, **kwargs)
File "/usr/lib/enigma2/python/Plugins/SystemPlugins/NetworkWizard/NetworkWizard.py", line 36, in __init__
File "/usr/lib/enigma2/python/Screens/Rc.py", line 26, in __init__
File "/usr/lib/enigma2/python/Screens/Rc.py", line 41, in readPositions
File "/usr/lib/python2.7/xml/etree/ElementTree.py", line 611, in __init__
File "/usr/lib/python2.7/xml/etree/ElementTree.py", line 646, in parse
IOError: [Errno 2] No such file or directory: '/usr/share/enigma2/rc_models/et6x00/rcpositions.xml'
Traceback (most recent call last):
File "/usr/lib/enigma2/python/Components/ActionMap.py", line 66, in action
File "/usr/lib/enigma2/python/Components/ActionMap.py", line 46, in action
File "/usr/lib/enigma2/python/Screens/NetworkSetup.py", line 800, in ok
File "/usr/lib/enigma2/python/mytest.py", line 322, in openWithCallback
dlg = self.open(screen, *arguments, **kwargs)
File "/usr/lib/enigma2/python/mytest.py", line 333, in open
dlg.isTmp = True
AttributeError: 'NoneType' object has no attribute 'isTmp'
(PyObject_CallObject(<bound method NumberActionMap.action of <Components.ActionMap.NumberActionMap instance at 0x20f9710>>,('WizardActions', 'ok')) failed)
getResolvedKey config.plugins.crashlogautosubmit.sendAnonCrashlog failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addNetwork failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addWlan failed !! (Typo??)
]]>
</enigma2crashlog>
</crashlogs>
</openvix>

[jonc]

I can install 627 then a software update to 649 ok

[Larry-G]

I can install 627 then a software update to 649 ok

Sadly no thats far too high a leap in image builds. Best go to www.openvix.co.uk and download the latest image from there to install.

Sent from my GT-I9300 using Tapatalk 2

[jonc]

Sadly no thats far too high a leap in image builds. Best go to www.openvix.co.uk and download the latest image from there to install.

Sent from my GT-I9300 using Tapatalk 2

No i installed 627 and when i did a software update it says am now on 649. I did download the latset version from www.openvix.co.uk thats how i first got the looping error so I had to download a earlier version and install that

[Larry-G]

This should now be fixed in the latest build available on www.openvix.co.uk.

Can you give it a go and let us know the results ??.

Thanks.;