PDA

View Full Version : Loss of Signal from the LNB



succuba
06-04-13, 13:05
I have just moved my Vu+ solo box a few inches to one side under the cabinet and suddenly noticed I have lost all channel signals, pulled out all the cables and tried a reboot with no joy.


The SNR: is showing 0% and the SGC: is 99%. I have tried another box and everything is OK, so that rules out the LNB and the wiring, the problem is definitely the box.


As the signal cable was a little tight it is possible that I may have shorted the connection inside the F connector, but all seemed OK, only a suggestion.


Would a reflash sort this out or maybe a factory reset, or is there something more sinister going on here.


Thanks for reading. An support or suggestions would be great.

Stanman
06-04-13, 21:23
Sinister??, must def, best sent up the bat signal:D

If it was fine before the move, I doubt any little leprechauns were waiting to hit any switches as soon as you moved the box, so best thing to do is check all the cables and make sure F connectors are seated properley and fully turned