View Full Version : [VU+ Duo] Problem with boot screen after installing ccam
Once ccam is installed and enabled in VIX (I've tried multiple image versions), my vu duo will not boot. It just sits at the screen with the spinning vix. The only way to get it working again is to reinstall the image and ccam (enigma2-plugin-cams-cccam.2.2.1_1.0-r0). All works perfectly until the box reboots, then the same thing happens again. I read elsewhere about a possible problem checking for updates, so added "config.softwareupdate.check=false" to the settings file, but this made no difference either. Has anyone else had a similar problem and managed to resolve it ?
i'm sorry but without a exact image / build version we cant help. also worth mentioning older images such as 2.2 / 2.3 / 2.4 are essentially now obsolete and we can no longer issue bug fixes for these so it's always best to use the most upto date stable build possible.
are you restoring any back-ups?
where did you get the cam from?
Versions I've tried
2.4.96
3.0.204
3.0.339
3.0.632
Cams obtained from the user guide on this site. I also downloaded from a link on another forum, and both have the same problem.
It is a clean install, no backup used.
The cam installs, and activates properly, but on reboot the box just hangs with a spinning vix
We would need to see debug logs, but all i can say is that on the 7 receivers i have with the latest ViX image not one displays the problems you describe and i use CCcam 2.2.1 on every one of them.
We would need to see debug logs, but all i can say is that on the 7 receivers i have with the latest ViX image not one displays the problems you describe and i use CCcam 2.2.1 on every one of them.
Where would I get the debug log from ?
you would first need to enable debug logs from within your log manager setup page ( sorry i cant remember the exact path as i'm at work and not near a receiver to check ). Debug logs are then saved to /home/root/logs or where ever you choose to save them such as a USB stick.
you would first need to enable debug logs from within your log manager setup page ( sorry i cant remember the exact path as i'm at work and not near a receiver to check ). Debug logs are then saved to /home/root/logs or where ever you choose to save them such as a USB stick.
Thanks, found it.
I'll do this later on, when I can have another mess with the box.
Right I decided to do this now.
Here is the output from the log file. There were multiple copies of this created every 12 seconds or so.
+ (1) Background File Eraser
+ (5) Tuxtxt
+ (8) graphics acceleration manager
+ (9) GFBDC
12150k video mem
- double buffering available!
4050kB available for acceleration surfaces.
resolution: 1280 x 720 x 32 (stride: 5760)
+ (9) gLCDDC
found OLED display!
lcd buffer 0x78f138 8448 bytes, stride 132
+ (9) Font Render Class
[FONT] initializing lib...
[FONT] loading fonts...
PYTHONPATH: /usr/lib/enigma2/python
[FONT] Intializing font cache, using max. 4MB...
+ (10) gRC
RC thread created successfully
+ (15) eWindowStyleManager
+ (20) DVB-CI UI
+ (20) UHF Modulator
couldnt open /dev/rfmod0!!!!
+ (20) RC Input layer
+ (20) misc options
+ (20) AVSwitch Driver
couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
+ (21) input device driver
Input device "dreambox advanced remote control (native)" is a mouse
Found 1 input devices!
+ (22) Hdmi CEC driver
eHdmiCEC: detected physical address change: 1000 --> 1300
eHdmiCEC: send message 84 13 00 03
+ (30) eActionMap
+ (35) CI Slots
scanning for common interfaces..
CI Slot 0 setSource(0)
CI Slot 1 setSource(0)
eDVBCIInterfaces->setInputSource(0, 0)
eDVBCIInterfaces->setInputSource(1, 1)
cannot open /proc/stb/tsmux/input2
cannot open /proc/stb/tsmux/input3
done, found 2 common interface slots
+ (35) CA handler
+ (36) Stream server
+ (40) eServiceCenter
settings instance.
+ (41) eServiceFactoryDVD
+ (41) eServiceFactoryM2TS
+ (41) eServiceFactoryMP3
+ (41) eServiceFactoryFS
+ (41) eServiceFactoryDVB
reached rl 70
---- opening lame channel db
reading services (version 4)
loaded 5178 services
scanning for frontends..
opening frontend 0
detected satellite frontend
FE_ENABLE_HIGH_LNB_VOLTAGE: Operation not supported
close frontend 0
FE_ENABLE_HIGH_LNB_VOLTAGE: Operation not supported
opening frontend 1
detected satellite frontend
FE_ENABLE_HIGH_LNB_VOLTAGE: Operation not supported
close frontend 1
FE_ENABLE_HIGH_LNB_VOLTAGE: Operation not supported
found 1 adapter, 2 frontends(2 sim) and 5 demux, boxtype 2
Use valid Linux Time :) (RTC?)
[EPGC] Initialized EPGCache (wait for setCacheFile call now)
Loading spinners...
found 19 spinner!
setIoPrio best-effort level 3 ok
couldn't open fp
[Harddisk] enumerating block devices...
new Harddisk sda -> /dev/sda -> /dev/sda
new Harddisk sdb -> /dev/sdb -> /dev/sdb
main thread is non-idle! display spinner!
Reading satellites.xml
removing internal link on frontend id 1
sec config cleared
setSlotInfo for dvb frontend 0 to slotid 0, descr BCM7335 DVB-S2 NIM (internal), need rotorworkaround No, enabled Yes, DVB-S2 Yes
setSlotInfo for dvb frontend 1 to slotid 1, descr BCM7335 DVB-S2 NIM (internal), need rotorworkaround No, enabled Yes, DVB-S2 Yes
slot: 0 configmode: simple
diseqcmode: single
slot: 1 configmode: simple
diseqcmode: single
sec config completed
[Picon] adding path: /media/usb/picon/
loading bouquet... /etc/enigma2/bouquets.tv 1
loading bouquet... /etc/enigma2/autobouquet.skyuk.hd.tv 1
98 entries in Bouquet autobouquet.skyuk.hd.tv
loading bouquet... /etc/enigma2/autobouquet.skyuk.101.tv 80
122 entries in Bouquet autobouquet.skyuk.101.tv
loading bouquet... /etc/enigma2/autobouquet.skyuk.240.tv 201
25 entries in Bouquet autobouquet.skyuk.240.tv
loading bouquet... /etc/enigma2/autobouquet.skyuk.301.tv 225
41 entries in Bouquet autobouquet.skyuk.301.tv
loading bouquet... /etc/enigma2/autobouquet.skyuk.350.tv 265
33 entries in Bouquet autobouquet.skyuk.350.tv
loading bouquet... /etc/enigma2/autobouquet.skyuk.401.tv 297
36 entries in Bouquet autobouquet.skyuk.401.tv
loading bouquet... /etc/enigma2/autobouquet.skyuk.501.tv 332
20 entries in Bouquet autobouquet.skyuk.501.tv
loading bouquet... /etc/enigma2/autobouquet.skyuk.520.tv 351
33 entries in Bouquet autobouquet.skyuk.520.tv
loading bouquet... /etc/enigma2/autobouquet.skyuk.601.tv 383
35 entries in Bouquet autobouquet.skyuk.601.tv
loading bouquet... /etc/enigma2/autobouquet.skyuk.950.tv 417
25 entries in Bouquet autobouquet.skyuk.950.tv
loading bouquet... /etc/enigma2/autobouquet.skyuk.1000.tv 441
10 entries in Bouquet autobouquet.skyuk.1000.tv
loading bouquet... /etc/enigma2/autobouquet.skyuk.1020.tv 450
1 entries in Bouquet autobouquet.skyuk.1020.tv
loading bouquet... /etc/enigma2/userbouquet.favourites.tv 450
0 entries in Bouquet userbouquet.favourites.tv
13 entries in Bouquet bouquets.tv
loading bouquet... /etc/enigma2/bouquets.radio 1
loading bouquet... /etc/enigma2/autobouquet.skyuk.main.radio 1
67 entries in Bouquet autobouquet.skyuk.main.radio
loading bouquet... /etc/enigma2/userbouquet.favourites.radio 67
0 entries in Bouquet userbouquet.favourites.radio
2 entries in Bouquet bouquets.radio
[Time By]: Transponder
[eDVBLocalTimeHandler] enable sync local time with transponder time!
[Ipkg] Added to OPKG destinations: /
add dreampackage scanner plugin
added
[FONT] adding font /usr/share/fonts/nmsbd.ttf...executing main
OK (Regular)
[FONT] adding font /usr/share/fonts/andale.ttf...OK (Fixed)
[FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
[FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)
[FONT] adding font /usr/share/enigma2/ViX_HD_Common/fonts/Roboto-Bold.ttf...OK (Regular)
[FONT] adding font /usr/share/enigma2/ViX_HD_Common/fonts/Roboto-BoldItalic.ttf...OK (Italic)
[FONT] adding font /usr/share/enigma2/ViX_HD_Common/fonts/Roboto-Black.ttf...OK (Bold)
[FONT] adding font /usr/share/enigma2/ViX_HD_Common/fonts/Roboto-BlackItalic.ttf...OK (Boldit)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Subtitlefont)
[FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD)
[FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)
[FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
[FONT] adding font /usr/share/fonts/valis_enigma.ttf...OK (Subs)
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
Activating keymap: Default (US)
Activating language English (UK)
--> setting scaler_sharpness to: 0000000D
Traceback (most recent call last):
File "/usr/lib/enigma2/python/mytest.py", line 567, in <module>
Components.UsageConfig.InitUsageConfig()
File "/usr/lib/enigma2/python/Components/UsageConfig.py", line 43, in InitUsageConfig
File "/usr/lib/enigma2/python/Components/config.py", line 1574, in __setattr__
File "/usr/lib/enigma2/python/Components/config.py", line 80, in load
File "/usr/lib/enigma2/python/Components/config.py", line 790, in fromstring
ValueError: invalid literal for int() with base 10: '<!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN">'
---- saving lame channel db
saved 446 channels and 5178 services!
release cached channel (timer timeout)
set RTC to previous valid time
- (41) eServiceFactoryDVD
- (41) eServiceFactoryM2TS
- (41) eServiceFactoryMP3
- (41) eServiceFactoryFS
- (41) eServiceFactoryDVB
- (40) eServiceCenter
clear instance
- (36) Stream server
- (35) CI Slots
- (35) CA handler
- (30) eActionMap
- (22) Hdmi CEC driver
- (21) input device driver
- (20) DVB-CI UI
- (20) UHF Modulator
- (20) RC Input layer
- (20) misc options
- (20) AVSwitch Driver
- (15) eWindowStyleManager
- (10) gRC
waiting for gRC thread shutdown
gRC thread has finished
- (9) GFBDC
- (9) gLCDDC
- (9) Font Render Class
- (8) graphics acceleration manager
- (5) Tuxtxt
- (1) Background File Eraser
reached rl -1
Right I decided to do this now.
Here is the output from the log file. There were multiple copies of this created every 12 seconds or so.
Where did you get the cam from?
have you tried the ones available on http://openvix.co.uk ?
Where did you get the cam from?
have you tried the ones available on http://openvix.co.uk ?
Yes, cams downloaded from there
Yes, cams downloaded from there
I have been experiencing the exact same issue with a new SOLO .I have installed on a few SOLOs before. Never has seen this issue. The debug log that I have is identical to the ones above. I have installed various images about 15 times. The pattern is very clear.
Install CCCam. Then start/autostart CCCam and reboot. THEN , the box hangs...
Any help any one ?
Lig
I have been experiencing the exact same issue with a new SOLO .I have installed on a few SOLOs before. Never has seen this issue. The debug log that I have is identical to the ones above. I have installed various images about 15 times. The pattern is very clear.
Install CCCam. Then start/autostart CCCam and reboot. THEN , the box hangs...
Any help any one ?
Lig
we need more information such as which image and is the receiver s genuine or a clone unti.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.