View Full Version : [ViX_Misc] Timeshift problem with latest update
Just done software update to build 632 on vu duo.. However when i try to timeshift back the timeshift now only goes back to start of current program.
On previous builds i could timeshift back as far as i have it set (in my case 300 mins).
Is this a bug or change in software
can any of the team help with this
Checking now, can you report the exact steps?
Rewinding on build 365 using PTS seems to have the same issue (solo 2, build 365), rewinding of PTS stops at start of current show, so not sure what build number this issue might have started on.
Please report back with box, image & build number you have the issue on.
I don't have this problem on the gigablue quad. Timeshift runs smoothly, fast forward and fast backwards.
Sent from my V972 Core4 using Tapatalk HD
Checking now, can you report the exact steps?
Rewinding on build 365 using PTS seems to have the same issue (solo 2, build 365), rewinding of PTS stops at start of current show, so not sure what build number this issue might have started on.
Please report back with box, image & build number you have the issue on.
Issue I see is on vu duo box build 632. I was on build 600 where I don't recall it being an issue
I don't have this problem on the gigablue quad. Timeshift runs smoothly, fast forward and fast backwards.
Sent from my V972 Core4 using Tapatalk HD
Ok so the Vu duo, Solo 2 has the problem the gigablue does not. Any other boxes have the issue?
Ok so the Vu duo, Solo 2 has the problem the gigablue does not. Any other boxes have the issue?
Any one else seeing this
OK another issue with build 632 Just tried to back up to build 600 to check timeshift issue. Blue button/Vix/backup manager select and restore.
Goes through motions restarts emigma but does not go to back up version remains at build 632
Managed to backup via usb to build 600... Tested and found pts on this build still only goes back as far as current program...
I think the build i had before that was 589 but dont have it any more anyone else got a build level that the pts works fully on..
I see a new all singing and dancing version due soon will this issue be resolved in the build
thanks
OK another issue with build 632 Just tried to back up to build 600 to check timeshift issue. Blue button/Vix/backup manager select and restore.
Goes through motions restarts emigma but does not go to back up version remains at build 632
you cant revert to a previous Image Build while enigma is awake using the Image manager it has to be done via a USB flash.
you cant revert to a previous Image Build while enigma is awake using the Image manager it has to be done via a USB flash.
Maybe i wasnt clear, i know i can restore via usb which is what i did.. but i thought using back up manager it does restore, it certainly tries , restarts but doesnt do it... did i do it wrong?
Back to the issue i reported with PTS can Andy take a look into this problem.. thanks
Have this issue on both my solo2 and xp1000 on build 632.
Used to work ok till build 600 i think.
Maybe i wasnt clear, i know i can restore via usb which is what i did.. but i thought using back up manager it does restore, it certainly tries , restarts but doesnt do it... did i do it wrong?
Backup manager restores your settings such as bouquets and plugins. It does not restore the image it self, for that you need to create a image backup with the image manager
Sent from my GT-I9300 using Tapatalk 2
Ok thanks for backup info
Have this issue on both my solo2 and xp1000 on build 632.
Used to work ok till build 600 i think.
So that's 3 boxes with Pts problem. Anymore ?
Double Tap
26-03-13, 12:11
hello garyblas just to confirm you are not alone i have the same fault with my vu+duo with newest image installed. i trust a fix will be on its way soon as the support is very good from team vix :thumbsup:
abu baniaz
26-03-13, 12:57
Confirmed on TM twin also. You can't rewind past current program.
Seems a common problem. Can someone on the image team confirm if this is being looked at
Thanks
Just PM'd Andy,
He said he will look into this after new EPG build. Top Man.:smiley_yup:
I also came across this last night. In the limited tests I've carried out since, it seems as though it happens on HD (encrypted?) channels but is ok on SD channels. On the SD channels I've tried, I can rewind to the limit that the buffer is set at providing it has been on that channel for enough time. But on an HD channel it will only go back as far as the start of the current program. Is this the same for the others experiencing this?
I get crashes now when recording and pushing channel up or down whilst recording.
Gigablue quad freezes (spinning all the time) but no crash but can't do anything, only hard reboot with switch on the backside.
no crashlogs were made.
sent from ONDA V972
if no crash logs are generated please enable debug logs and submit those.
Where can I enable the debug logs?
Found!
After the reboot i also lose all my EPG.
Just created a new freeze, hopefully I can give you a debug log.
sent from ONDA V972
OK got a debug log :)
nothing in that log to do with timeshift, also please report any timeshift issues in the correct thread.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.