Help with "Red ring of death" and problems in it´s wake

[Berggren]

Hi guys!

I also got the red light of death on my Duo the other day.
Searched the forums and came up with the threads that suggested that it could be fixed by changing the capacitor C807.
Said and done, took my box to work and changed te capacitor to a new one. I measured the old one and it sure was broken, not showing any farads anymore just resistance.

Happily I put the box together so much that I could start it, but nothing happened!
Still the same irritating red light of death. I can still hear the HDD spin up so the box is powered up.

I now closely looked at the other sorrounding components and found that one of IC´s next to C807 looks funky :eek: Maybe it had an alien inside of it that had to break loose :D
My experiance tells me it´s broken to but I can´t seem to find what component it is and what to replace it with.
Took a couple of pics to show you what it looks like, including the text on the IC, maybe you can aid me in the right direction where to get a new one and what it is?
Perhaps a voltage regulator?

Thank you in advance.

24421 24422 24425

[harryt]

i think they are AOZ1021AI there are three of them on the board

[TK4|2|1]

It's fooked. ZA9213, ain't got a clue where you'd get I though.


Sent using sorcery and the magic interwebs

[Berggren]

i think they are AOZ1021AI there are three of them on the board
Yeah, that´s their name but I´m unable to find someone who sells them and will ship to Sweden.

[Clabs]

Have a look at Digikey. Whether they will ship a small quantity for a reasonable price is another matter.


[/code]http://www.digikey.com/product-detail/en/AOZ1021AI/785-1155-2-ND/1855927[code]

[garyblas]

More importantly why has this chip blown.... Looking at damage suggests an overvoltage condition..
Did you get a spike/surge of electricity ? You could find fitting another chip may do the same unless you can find out what blew it.

[satmanbasil]

Hi mate

Sorry to hear the cap wasnt the problem as the boss said not always the main fault. did note from your message about the hdd starting up, since you did the repair had you run the box without the hdd connected as advise on the board when others reported the red light of death problem were advised to remove all hdd and usb devices and allow the box to startup after rest from flash so maybe one avenue to look at, also i found a workshop in london that fixed mine you can contact them and ask if they can carry out the repair to the 3 chips mentioned, i did read on another forum this could also be part of the red light problem if one pops
good luck !

[Berggren]

Have a look at Digikey. Whether they will ship a small quantity for a reasonable price is another matter.
[/code]http://www.digikey.com/product-detail/en/AOZ1021AI/785-1155-2-ND/1855927[code]Thanks, will send them a message and see what they say.


More importantly why has this chip blown.... Looking at damage suggests an overvoltage condition..
Did you get a spike/surge of electricity ? You could find fitting another chip may do the same unless you can find out what blew it.True, but I still need a new chip no matter what.
The box was fine on the evening and the other day is had the "red light of death".
It´s an "old" box, over 3 years old and I never power it down unless when it hangs.
This due to an old software issue when the box went down in standbymode you had to restart it to get it going again. This was a long time ago but I use a Harmonyremote with all activities programmed so out of pure laziness i haven´t got around to reprogram it :)

Guess I´m paying the price for that now :D

[Berggren]

Hi mate

Sorry to hear the cap wasnt the problem as the boss said not always the main fault. did note from your message about the hdd starting up, since you did the repair had you run the box without the hdd connected as advise on the board when others reported the red light of death problem were advised to remove all hdd and usb devices and allow the box to startup after rest from flash so maybe one avenue to look at, also i found a workshop in london that fixed mine you can contact them and ask if they can carry out the repair to the 3 chips mentioned, i did read on another forum this could also be part of the red light problem if one pops
good luck !Hi mate!

The first startup after I changed the cap was without hdd or USB attached, so already tried that approach.
I´m comfortable changing the chips myself, we got an SMDdesoldering station at work and I once had a licence for soldering but it has expired now since I changed workplace and no longer require to have a licence.
Just need to get hold of the darn things :rolleyes:
Guess I´ll have to wait and see how much the shipping will be to Sweden, I could change the currency to SEK on the Digikey site so I assume they do ship here :thumbsup:

I´ll post updates in this thread to keep y'all updated .

Regards Berggren