Vu+Duo Tuner Configuration nightmare!!

[pj4d]

Hi folks,

I have a fixed dish (my old sly) and I have both Tuners A & B set exactly the same as advised :
Simple
Single
28.2E
No

However I have not been able to record on one channel and watch another.
I was under the impression that these beasts are twin tuners...

I am running the latest Vix and have also tried changing the preferred tuner to Auto, Tuner A and Tuner B, still nothing !!!

Please help somebody as this is driving me insane !!!

[Stanman]

Check your cables, try taking one out at a time and see if you get any reception and than swap them over that way you will know if its tuner or more likely cable/ F connector

[Trial]

Hi,
try configuring tuner B as "same as A" or something similar.

ciao

[satmanbasil]

Hi

You need to make sure tuner B is looped via tuner A do this by the menu using the < > buttons that way you have both

[hullfc27]

when you loop it through it says no free tuner??

[satmanbasil]

Hi mate

Your setup is wrong you have


I have a fixed dish (my old sly) and I have both Tuners A & B set exactly the same as advised :
Simple
Single
28.2E
No

Change using <> key simple to diseq A/B this will give you two satellite make sure you then name them both as 28E this should then work

regards