Freezin & Mosaicing

[canthackit]

wotcha

i've just reinstalled the Gigant image (don't ask why) :D everything went well as per usual, now i'm getting constant freezing and mosaicing.

ecm times are still quite fast 108 ms or thereabouts, i just cant suss out why this happening.

running CCam 214, and using prio file.

dont know what else to add, so who's going to help poor old canthackit :D

oh yeah nearly forgot $$$ uk sub

regards: canthackit

[t.ph]

Try dropping back to CCcam 2.13 to see if that makes any difference!

[satmanbasil]

Hi mate

Try adding this to your CCcam.cfg

SMARTCARD CLOCK FREQUENCY: /dev/sci1 5500000
#
SMARTCARD SID ASSIGN : /dev/sci1 274 { 13f2, 16a9, 2485, ccb5, ccba, ccbf, ccd8, ccdd, cb90, 1979, 1dce, 183a, d00c, c5c6, 2463, 2494, d35b, c7c9, 122f, 1dbb, 1bbe, 1bbd, 1774, cc09, 177e, 1776, 1788, 1bc5, 1bbc, 1591, 1772, 177c, cc08, 2f03, 2f08, 1bbf, cb8f, 1710, c481, 1537, c4f4, d444, 2484, cbc9, 13a1, 196a, 1dc8, 2328, ccb0, ccd3, 183f, 183b, d016, cfd5, 183e, 1841, 1839, cfee, 183c, 2329, 232f, 232a, 232b, cd32, d2f9, cb84, ccc4, ccce, ccc9, 2586, 168a, 2f12, 2f0d, 1966, c49f, c74d, 164e, 1391, c4ae, 1e14, 1e15, 1e16, 1e17, 1e1e, 1e1f, 1e23, 1e24, c357, 158b, 2487, 1968, 1db5, d7cb, 196c, 1dce, 1392, c7a6, 122d, 138b, 1965, 1e0a, 1db1, 1db0, 1840, 1842, 2f4e, 2f6c, 2f45, 2f44, 2f62, 2e58, 2486, 1585, 12c4, 1582, 1771, cc0a, 1775, 1773, 1777, cc06, 1583, d421, 2efe, d057, d0fc, d101, 1b81, 1b59, 1b62, 1b5f, 1b66, 1b5e, 1b6d, 1b5b, 1b5d, 1b64, 0ffa, 11ff, 1647, 1200, 139d, d453, 15e6, 15e5, d026, 15e1, 15e3, 15e2, d426, 15e4, d7d3, d15d, 232c, 2332, d156, 16ac, c5a8, 1dc4, 1dc4, 1139, 14bc, d2ff, d2fb, c5b2, c5b7, d2f1, d2f6, d2fc, 12fc, 125d, 10ce, 11fc, 247e, 10d1, 10cf, 157e, 1133, 10d2, 122a, 122c, 1233, 138d, 10d0, 11fa, 122b, 107d, 1332, 1076, 1078, 1070, 107e, 157f, 107b, 119f, 11a1, 2481, 155f, 1560, 1561, 1562, 1563, 1564, 1565, 1566, 156e, 152b, 152a, 1569, 1570, 156d, 1528, 1527, 1571, 156f, 156c, 1525, 156a, 1523, 156b, 1524, 1529, 1526, 132b, 132d, 132e, 132c, 1519, 151c, 153a, 247d, 125f, 1261, 13f0, 13ef, 247c, 0f41, 2460, c350, cb91, 1320, 131f, cb8c, 1652, 1592, 1456, d43f, 1b61, 1bc4, 183d, 113a, 2587, 1976, 1970, 196b, 1db6, 125e, 12ca, 12cc, 12cd, 1567, 1210, 120f, 17d7, 2fa7, c355, 1b5a, 1b60, cc07, cc0b, 1978, 1dbf, 1969, d04d }
#
They are the uk sids for 28E

regards
satmanbasil

[satmanbasil]

Hi mate

Just a post script to my last message where it says /dev/sci1 depending what slot your using you may need to change to /dev/sci0 instead

regards
satmanbasil

[canthackit]

well

i've lowered the clock speed to 5.5 Mhz and installed the SID Assign, as per rec, i've done a rescan of the 28.2 channels for the 10,000th time, thought all this had cracked it, but no! just watching SciFi/Horror HD it's bloody mosaicing still (constantly)

thanks for the suggestions so far guy's but i need more please :D

regards: canthackit

[canthackit]

ok stable so far at last.

did yet another rescan, used the settings posted above, i did have the /dev path set to /dev/sci1 and it's always been that way and i never had any problems with it, but noticed that the card is in the upper slot so i changed the path to /dev/sci0 and i usualy run the clock speed at 6.8 Mhz but that is now adjusted to 5.5 Mhz.

so i'm now watching footy on sports 1 HD no probs now for a couple of hours.


thanks again guy's

regards: canthackit