PDA

View Full Version : USB Stick Terrestrial A867


Chris2384
28-01-13, 16:19
I've got a usb stickk A867 for terrestrial channels.
Which software do I need to use it on Vu+solo2 Vix Image?
Thks.
Chris2384
29-01-13, 15:02
Any help/info on this subject please? Thks.
MarsArtis
29-01-13, 17:35
Hi there. For instruction on how to install on VIX go here
http://www.world-of-satellite.com/showpost.php?p=137507

But be warned I've encountered issues by using the A867. As reported here:
http://www.world-of-satellite.com/showpost.php?p=173008

So please let us know how it goes for you
Chris2384
29-01-13, 18:11
Thanks very much for your reply. Will try it later on this week as I,m away atm.
DRAGO.NET
29-01-13, 20:36
The A867 does not work even on ET6500 with the last VIX ...

What to do?
MarsArtis
29-01-13, 21:05
The A867 does not work even on ET6500 with the last VIX ...

What to do?
just have a look at the first link I posted in this very thread at #3.
DRAGO.NET
29-01-13, 21:31
Thanks for the reply, but I solved by changing in lib/firmware the file dvb-usb-af9035-01.fw with the file dvb-usb-af9035-02.fw.

If you allow me I put it online.
MarsArtis
29-01-13, 21:37
Thanks for the reply, but I solved by changing in lib/firmware the file dvb-usb-af9035-01.fw with the file dvb-usb-af9035-02.fw.

If you allow me I put it online.
Interesting, where did you find that firmware version? I'm wondering if that could be used on Vu+ receiver too.
So lemme try to understand: you installed the dvb-usb-af9035-01.fw from feed and then manually replaced it with the 02 version? Is that rite?

Just make a little test: If you restart enigma2 does the DVBT tuner still work?
DRAGO.NET
29-01-13, 21:54
Yes, it is ...

Now the A867 works
MarsArtis
29-01-13, 22:02
So please share here the 02 I'll test on my duo
judge
29-01-13, 22:08
If you allow me I put it online.
If it's not already in the feeds, please do & also let us know where you got it from so the feeds can be updated.
DRAGO.NET
29-01-13, 22:19
OK..


http://bayfiles.com/file/CTyf/doH1DA/dvb-usb-af9035-02.fw


I tested it on Xtrend ET6500.....
MarsArtis
30-01-13, 20:57
when "replacing" did you just remove the 01 and put the 02. Or did you then rename the 02 to match 01?
MarsArtis
30-01-13, 21:10
not working for me on DUO.

I did install from the plugin's feed dvb-usb-af9035-01.fw
Removed the dvb-usb-af9035-01.fw from lib/firmware and uploaded the dvb-usb-af9035-02.fw you provided. Changed permission to 644 and tryed both leaving the name as is and changing it to match dvb-usb-af9035-01.fw.

Everytime I rebooted but the tuner was not showed.
And here's the terminal report:


dmesg | grep dvb
dvb_bcm7335: module license 'Proprietary' taints kernel.
lsusb
Bus 001 Device 001: ID 1d6b:0002
Bus 002 Device 001: ID 1d6b:0002
Bus 003 Device 001: ID 1d6b:0001
Bus 004 Device 001: ID 1d6b:0001
Bus 001 Device 002: ID 05e3:0608
Bus 001 Device 004: ID 07ca:a867
lsmod
Module Size Used by
ipv6 346460 12
brcmfb 1127 2
dvb_bcm7335 4943401 32 brcmfb
procmk 1397 1 dvb_bcm7335