XabiX
27-12-12, 20:01
Hello,
I had to remove my hdd drive connected through sata and now the box doesn't boot with the interface.
In the hundreds of logs that I have I see such messages:
EXCEPTION IN PYTHON STARTUP CODE:
------------------------------------------------------------
Traceback (most recent call last):
File "/usr/lib/enigma2/python/mytest.py", line 658, in <module>
runScreenTest()
File "/usr/lib/enigma2/python/mytest.py", line 458, in runScreenTest
plugins.readPluginList(resolveFilename(SCOPE_PLUGI NS))
File "/usr/lib/enigma2/python/Components/PluginComponent.py", line 103, in readPluginList
File "/usr/lib/enigma2/python/Components/PluginComponent.py", line 30, in addPlugin
File "/usr/lib/enigma2/python/Plugins/SystemPlugins/ViX/SoftcamManager.py", line 40, in SoftcamAutostart
File "/usr/lib/enigma2/python/Plugins/SystemPlugins/ViX/SoftcamManager.py", line 499, in __init__
OSError: [Errno 17] File exists: '/etc/tuxbox/config'
------------------------------------------------------------
(exit code 5)
main thread is non-idle! display spinner!
and
hotplug on dvi
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
setMode - port: DVI mode: 1080p rate: 50Hz
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
[EPGImport] autostart (0) occured at 1356633821.01
[AutoTimer] Auto Poll Enabled
[SoftcamManager] AutoStart Enabled
EXCEPTION IN PYTHON STARTUP CODE:
------------------------------------------------------------
Traceback (most recent call last):
File "/usr/lib/enigma2/python/mytest.py", line 658, in <module>
runScreenTest()
File "/usr/lib/enigma2/python/mytest.py", line 458, in runScreenTest
plugins.readPluginList(resolveFilename(SCOPE_PLUGI NS))
File "/usr/lib/enigma2/python/Components/PluginComponent.py", line 103, in readPluginList
File "/usr/lib/enigma2/python/Components/PluginComponent.py", line 30, in addPlugin
File "/usr/lib/enigma2/python/Plugins/SystemPlugins/ViX/SoftcamManager.py", line 40, in SoftcamAutostart
File "/usr/lib/enigma2/python/Plugins/SystemPlugins/ViX/SoftcamManager.py", line 499, in __init__
OSError: [Errno 17] File exists: '/etc/tuxbox/config'
------------------------------------------------------------
Any idea of the issue?
thanks
box_type=gbquad
build_type=0
version=3.0
build=539
drivers=20121217
date=20121224124557
comment=ViX
target=9
creator=openViX
22171221722217322174
I had to remove my hdd drive connected through sata and now the box doesn't boot with the interface.
In the hundreds of logs that I have I see such messages:
EXCEPTION IN PYTHON STARTUP CODE:
------------------------------------------------------------
Traceback (most recent call last):
File "/usr/lib/enigma2/python/mytest.py", line 658, in <module>
runScreenTest()
File "/usr/lib/enigma2/python/mytest.py", line 458, in runScreenTest
plugins.readPluginList(resolveFilename(SCOPE_PLUGI NS))
File "/usr/lib/enigma2/python/Components/PluginComponent.py", line 103, in readPluginList
File "/usr/lib/enigma2/python/Components/PluginComponent.py", line 30, in addPlugin
File "/usr/lib/enigma2/python/Plugins/SystemPlugins/ViX/SoftcamManager.py", line 40, in SoftcamAutostart
File "/usr/lib/enigma2/python/Plugins/SystemPlugins/ViX/SoftcamManager.py", line 499, in __init__
OSError: [Errno 17] File exists: '/etc/tuxbox/config'
------------------------------------------------------------
(exit code 5)
main thread is non-idle! display spinner!
and
hotplug on dvi
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
setMode - port: DVI mode: 1080p rate: 50Hz
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
[EPGImport] autostart (0) occured at 1356633821.01
[AutoTimer] Auto Poll Enabled
[SoftcamManager] AutoStart Enabled
EXCEPTION IN PYTHON STARTUP CODE:
------------------------------------------------------------
Traceback (most recent call last):
File "/usr/lib/enigma2/python/mytest.py", line 658, in <module>
runScreenTest()
File "/usr/lib/enigma2/python/mytest.py", line 458, in runScreenTest
plugins.readPluginList(resolveFilename(SCOPE_PLUGI NS))
File "/usr/lib/enigma2/python/Components/PluginComponent.py", line 103, in readPluginList
File "/usr/lib/enigma2/python/Components/PluginComponent.py", line 30, in addPlugin
File "/usr/lib/enigma2/python/Plugins/SystemPlugins/ViX/SoftcamManager.py", line 40, in SoftcamAutostart
File "/usr/lib/enigma2/python/Plugins/SystemPlugins/ViX/SoftcamManager.py", line 499, in __init__
OSError: [Errno 17] File exists: '/etc/tuxbox/config'
------------------------------------------------------------
Any idea of the issue?
thanks
box_type=gbquad
build_type=0
version=3.0
build=539
drivers=20121217
date=20121224124557
comment=ViX
target=9
creator=openViX
22171221722217322174