PDA

View Full Version : Reboot Loop


redbrownie
02-12-12, 23:49
Hi guys,

My VU+ Duo is stuck on a permanent reboot loop so I can't watch any TV at all. I've attached the crash logs - it happened after I switched off Sgt Flip Flops Bouqets via TSPanel.

Can someone please advise what I can do to fix this?!

21550
redbrownie
03-12-12, 00:11
Hi guys,

My Vu+ Duo is stuck in a reboot loop - i've attached the crash logs. Can someone please help?!

Thanks
portbhoy
03-12-12, 01:01
Where you doing something with the skin?
redbrownie
03-12-12, 01:10
No, I turned Sgt Flip Flops channel list off via TSPanel and it said to press blue to restart Enigma so I did. Then when it reloaded I got the error and it keeps happening when the box loads.

I deleted the PLI HD skin via ftp because looking at the logs I thought it was to do with that but that just generated different crash logs.

Any ideas? I'm thinking of deleting TSPanel via ftp and trying that?
Rob van der Does
03-12-12, 06:48
You're on build 413 while the latest build is 473; I would suggest to update.
You can try doing that via telnet by the following command:


init 4 && opkg update && opkg upgrade && init 6
Rob van der Does
03-12-12, 07:09
And please: even if you think you have a serious problem, just post is once. There's no point in multiple postings.
redbrownie
03-12-12, 07:50
Sorry Rob, I only posted twice because I thought the original post was in the wrong forum.

Thanks for your help.
naveh
03-12-12, 15:50
I have the same problem on my UNO.
Rob van der Does
03-12-12, 15:56
I have the same problem on my UNO.
Lol, then the same answer (http://www.world-of-satellite.com/showthread.php?23755-Reboot-Loop&p=176867&viewfull=1#post176867) applies to you.....
naveh
03-12-12, 16:33
You're on build 413 while the latest build is 473; I would suggest to update.
You can try doing that via telnet by the following command:


init 4 && opkg update && opkg upgrade && init 6

after doing this box reboots and I get the same build as before.
Rob van der Does
03-12-12, 16:44
And which build is that? Maybe you can post a debuglog?
naveh
03-12-12, 17:06
I am at build 423. my logs lib is empty.
Larry-G
03-12-12, 17:09
if you have logs they will be in home>root>logs.

maybe try a fresh flash directly to 473 and go from there.

http://www.world-of-satellite.com/enigma2/openvix/index.php?dir=
redbrownie
03-12-12, 17:50
How do I know when this is done?

The last line of Telnet says something about collected errors - tuxbox common wants to install file etc/tuxbox/satellites.xml But that file is already provided by package SGTFLIPFLOP-Settings-12_10_12-all

root@vuduo:~#
redbrownie
03-12-12, 17:57
Never mind, I rebooted the box via the switch on the back and it's working fine now.

Thanks for your help Rob, I would never have know what to do with that Telnet command you gave me, it's much appreciated :-)
naveh
03-12-12, 19:19
21568

this is after the update. eternal booting.
naveh
03-12-12, 22:30
I have used a USB for the new build, that went OK.
but when i restored my backup settings, the same bootloop again.
Larry-G
03-12-12, 22:37
then dont restore the settings as some thing in them is causing the initial problem. set up the box from scratch.