View Full Version : [GiGaBlue QUAD] Quad screen not working properly
Hello,
The LCD screen embedded within the GB works OK when I reboot and/or did flash the box. But it stays fix and doesn't change when I change TV channels etc..
Here is what it looks like all the time when I use the GB:
21125
I did try to follow this thread but it diddn't work: http://www.world-of-satellite.com/showthread.php?22674-Picons&p=169528&viewfull=1#post169528
Picons work ok on the TV with enigma2-plugin-picons-tv-ocram.hd.transparent
/media/usb/picon# find / -name picon
/media/usb/picon
/picon
/media/usb/picon# ls -l | more
-rw------- 1 root root 4576 Nov 18 00:46 1_0_19_1B1C_802_2_11A0000_0_0_0.png
-rw------- 1 root root 6289 Nov 18 00:46 1_0_19_1B1D_802_2_11A0000_0_0_0.png
/picon# ls -l | more
-rwxrwxrwx 1 root root 1830 Nov 16 11:45 1-2-3.tv.png
-rwxrwxrwx 1 root root 2184 Nov 16 11:45 101tv.png
-rwxrwxrwx 1 root root 1952 Nov 16 11:45 13emerue.png
-rwxrwxrwx 1 root root 2093 Nov 16 11:45 13emeruehd.png
here are my questions:
1/ By the default when you install OpenVix, do you need to do any trick to get picons shown on the LCD screen?
2/ Why do have two picon directories? How do I know which one is used? Can I delete one?
3/ Any idea why this doesn't work?
Thanks
XabiX
PS: Openvix
version=3.0
build=421
drivers=20121116
date=20121117194900
FYI I have upgraded the box and picons where upgraded too:
Upgrading enigma2-plugin-picons-tv-ocram.hd.transparent on root from 2012-11-16--11-40-08 to 2012-11-22--15-52-46...
if I do a
root@gbquad:/picon# ls -l | more
-rwxrwxrwx 1 root root 1830 Nov 22 15:58 1-2-3.tv.png
-rwxrwxrwx 1 root root 2184 Nov 22 15:58 101tv.png
-rwxrwxrwx 1 root root 1952 Nov 22 15:58 13emerue.png
I can see that the picons are stored in /picon. Should I remove then the ones in the usb key?
now:
build=440
drivers=20121121
date=20121123094918
this image didn't work correctly with recordings so I did another update (within the same day) and now we are at 445.
build=445
drivers=20121121
date=20121123163047
I removed the file skin_display220_no_picon.xml provided within mu 1st post. Now the screen is not fixed/frozen and gets update when I change channel etc..
But I still don't have any picon displayed. I think I am back like with a clean image of OpenVix.
Do i need to do anything special to get picons also displayed on the screen?
MERCI
Basic question,
do people have picons displayed within the GB LCD screen without doing anything special?
Merci
Basic question,
do people have picons displayed within the GB LCD screen without doing anything special?
Merci
Not with VIX, either use the xml from openmips or rossis one :thumbsup:
Hi Marty,
i did try with the openmips following your post here http://www.world-of-satellite.com/showthread.php?22674-Picons&p=169528&viewfull=1#post169528 but didn't seem to work.
Where can I find the Rossis one?
by the way, why can't we aks OpenVix folks to add this directly within the image (part of one of the patches)?
Merci
Mr. Mister
25-11-12, 23:04
Hi Marty,
i did try with the openmips following your post here http://www.world-of-satellite.com/showthread.php?22674-Picons&p=169528&viewfull=1#post169528 but didn't seem to work.
Where can I find the Rossis one?
by the way, why can't we aks OpenVix folks to add this directly within the image (part of one of the patches)?
Merci
http://www.world-of-satellite.com/showthread.php?22266-LCD-Picons-for-Gigablue-Quad
Excuse the noobishness, is there a changelog for the build numbers anywhere chaps please ?
Hi Marty,
i did try with the openmips following your post here http://www.world-of-satellite.com/showthread.php?22674-Picons&p=169528&viewfull=1#post169528 but didn't seem to work.
Where can I find the Rossis one?
by the way, why can't we aks OpenVix folks to add this directly within the image (part of one of the patches)?
Merci
i can create an ipk if vix want to add my lcd xml to the feeds for the quad.
i can create an ipk if vix want to add my lcd xml to the feeds for the quad.
by all means please do.
heres an ipk for the custom quad lcd screen.
please add to the feeds for quad and 800ue. :)
Could someone post a picture on how it looks on LCD? Thanks.
I have installed the plugin but it looks like it doesn't find the picons.
On top I can see when the channel is HD or not but I don't see anything else.
Is this plugin supposed to be using the default picons or is there another set of picons required?
for my quad custom lcd display xml you need my large custom picons..
have you even read my lcd picons for the quad thread?
I have installed the plugin but it looks like it doesn't find the picons.
On top I can see when the channel is HD or not but I don't see anything else.
Is this plugin supposed to be using the default picons or is there another set of picons required?
No you need to use different folder:
osd picons in picon
lcd picons in lcd_picon
Original post is here: http://www.world-of-satellite.com/showthread.php?22266-LCD-Picons-for-Gigablue-Quad
Could you please post a picture if you get it working?
Could you please post a picture if you get it working?
Not a great picture but you get the idea :)
21412
i had the same issue, the lcd looks weird through my camera, they look excellent on the display though
i had the same issue, the lcd looks weird through my camera, they look excellent on the display though
Yes, quite sharp.
We also have 'REC' in red when recording and a green or red update icons too.
PS great work Rossi :thumbsup: can't wait for a FULL 28°E picon set (hint hint :p )
Yes, quite sharp.
We also have 'REC' in red when recording and a green or red update icons too.
PS great work Rossi :thumbsup: can't wait for a FULL 28°E picon set (hint hint :p )
Thanks! Picture looks great... Makes a lot of sense to make big icons that you can actually read... I don't have 28E so cannot really use it. Hope to get some for 19E some day...
Yes, quite sharp.
We also have 'REC' in red when recording and a green or red update icons too.
PS great work Rossi :thumbsup: can't wait for a FULL 28°E picon set (hint hint :p )
i know, i know, lol
im trying to squeeze abit of laptop time at home :O)
for my quad custom lcd display xml you need my large custom picons..
have you even read my lcd picons for the quad thread?
Yes I did but I needed Astra picons but will re read :) (I did asked if available within the thread few weeks ago)
There is no way to use a tool to scale down the ones installed directly as plugins? instead of having to resize them. Even though resizing could lead to a better fit within the screen but as a temp solution.
Yes I did but I needed Astra picons but will re read :) (I did asked if available within the thread few weeks ago)
There is no way to use a tool to scale down the ones installed directly as plugins? instead of having to resize them. Even though resizing could lead to a better fit within the screen but as a temp solution.
28°E is Astra :p (as well as several other orbital locations :D )
good catch I was thinking about 19,2 as my post here: http://www.world-of-satellite.com/showthread.php?22266-LCD-Picons-for-Gigablue-Quad&p=168336&viewfull=1#post168336
Rob van der Does
29-11-12, 05:58
Moved to the correct section.
Yes I did but I needed Astra picons but will re read :) (I did asked if available within the thread few weeks ago)
There is no way to use a tool to scale down the ones installed directly as plugins? instead of having to resize them. Even though resizing could lead to a better fit within the screen but as a temp solution.
use the openmips xml if you want your osd picons to show on the lcd without doing anything.
OpenVIX guys,
Any reason not to integrate by default the same xml file than the one provided with openmips?
@rossi2000: I should then remove your plugin and just copy the openmips file over like the one provided in your thread here?
http://www.world-of-satellite.com/showthread.php?22674-Picons&p=169104&viewfull=1#post169104
I will try but I had the impression the the picons with openmips xml file were displayed too small.
I think it would be worth to provide a better xml file within the default image but I agree it s always depends on everyone wishes :d
Xabix, check this... some 19E picons for LCD: http://www.world-of-satellite.com/showthread.php?22266-LCD-Picons-for-Gigablue-Quad&p=175997&viewfull=1#post175997
@rossi2000:
would be good to have a how to bc I really feel bad as it doesnt work for me. I have the picons that I downloaded from the plugin plus the one I copied over given by tinos in /picons and then the screen is back to not working.
FYI when you remove the plugin you get:
root@gbquad:/media/usb# opkg remove enigma2-plugin-picons-rossi2000-custom-quad-lcd
Removing package enigma2-plugin-picons-rossi2000-custom-quad-lcd from root...
Removing Custom LCD Package, Please Wait...
Custom LCD Package has been removed
//var/lib/opkg/info/enigma2-plugin-picons-rossi2000-custom-quad-lcd.postrm: line 12: syntax error: unexpected "fi"
No packages removed.
Collected errors:
* pkg_run_script: package "enigma2-plugin-picons-rossi2000-custom-quad-lcd" postrm script returned status 2.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.