View Full Version : Not finding any Channels
:mad: Set up my 3 dish's disc switch etc did scan all channels came in fine.
Loaded Vix image.
now cant find any channels tried manual and auto scans.
Did factory reset, still no channels.
WTF is gone wrong?
Anyone:(
:mad: Set up my 3 dish's disc switch etc did scan all channels came in fine.
Loaded Vix image.
now cant find any channels tried manual and auto scans.
Did factory reset, still no channels.
WTF is gone wrong?
Anyone:(
Sounds very strange. Double check your tuner and scan settings. Very much doubt that its image related.
I tried changing lnb with my spiderbox and all channels came in fine so sats are working fine
tomthebomb1968
14-09-10, 16:31
Lads I have had the same thing happen a few times but not just with the VIX image it seems to be happening with most new images . I have TunerA setup as Simple /Positioneer and tuner B locked at 28.2.It seems that tuner A is going to sleep and not waking when required. The channels are greyed out and the message to check tuner config displays. If i then go into the Satfinder menu and drive the Sat to required bird all is fine again. Its strange!
what do i do to get it working any ideas welcome
@ Tyler whats your satellite setup?
i hooked it up to a single sat and it is now bringing them in.
I'm loosing the plot.
I never had any problems with my spiderbox 9000hd
boss its disq switch 4 way.
first is thor
second is hotbird
3rd is astra 2a/2d 28 degrees.
boss its disq switch 4 way.
first is thor
second is hotbird
3rd is astra 2a/2d 28 degrees.
Are they all connected to one tuner?
Why dont you connect 28deg to Tuner A and the other 2 satellite to Tuner B using diseqc switch.
leads are in the attic.
i am also using a second box
Ok, so i'm assuming all 3 are on one tuner then, so working from memory you need to set the tuner to advanced to get all the satellites setup.
The problem was with the older Vix image which i downloaded from the download section. (please update for new users).
Spidermonkeyuk sent me the new image and all working fine now including ccam which broke my heart for 3 days.
WHat do you mean sent you the new image?! Are you still using the vix image?! As the only released image is the 1.0 image :confused:
Go to Menu -> Information -> About.
What does it say in regards to the Enigma version?!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.