View Full Version : [VU+ Duo] Network Mount (NFS SAMBA)
Hi All, is anyone else experiencing issues when attempting to mount a network drive? Whenever I select the network mount option (within Setup – Network) I receive an enigma2 crash.
If there is a quick fix then I would be very interested.
VUDUO - Open VIX 3.0 Build 381
Crash report attached. Many thanks,
Rich
20376
20377
i am getting a similar issue on build 381 altho when i enter mounts setup theres just an empty window with no settings and you can only press red to close.
i do not get any crashes though, but ive lost my /media/hdd mount on my server so i cant record anything.
same here. Have nothing under VIX-Mount Manager - Setup mounts
After setup mounts under Settings-System-network-Mounts setup linux mounting my NFS shares correctly, I have access to files, everythings fine. But all VIX-Related backup functions failing with "there was a problem with this device". And yes, one of my shares is defined with "use as hdd replacement"
Latest VTI image (I move to VIX from VTI) works with same settings perfectly. Any help ?
203812038220383
Rob van der Does
22-10-12, 13:08
In image manager, push Menu: can you change the location there?
Not sure if lan-mounts are suitable for images. Can you also try the backupmanager to do the same?
/media/hdd is no longer selectable in anything as the NFS /media/hdd replacement mount isnt active.
i have this set as hdd replacement aswell.
as mentioned above, the share is browsable through /media/net but the /media/hdd mount no longer exists, (for recording, timeshift etc)
cannot re-set it or even check the status as the mounts setup page is empty.
This is being looked into guys, if you have any debug logs for the corresponding times etc please upload them.
Hi Guys,
In my case i could solve the issue when havin an empty network mountmanager, by deleting the automounts.xml in etc/enigma2
The restart E2 and start again..with adding network hdd with mountmanager
so, did everything from scratch.
Still noting under Settings -> VIX -> mount manager
I defined new mounts in settings->network->mounts and selected "use as hdd replacement". he mode is FSTAB.
STB has changed /etc/fstab correctly:
rootfs / auto defaults 1 1
proc /proc proc defaults 0 0
devpts /dev/pts devpts mode=0620,gid=5 0 0
usbdevfs /proc/bus/usb usbdevfs noauto 0 0
tmpfs /var/volatile tmpfs defaults 0 0
usbfs /proc/bus/usb usbfs defaults 0 0
10.0.0.17:/media/wd /media/net/wd nfs nfsvers=3,proto=tcp,rsize=32768,wsize=32768,timeo= 14,fg,soft,intr 0 0
10.0.0.17:/media/seagate25 /media/net/nfs nfs nfsvers=3,proto=tcp,rsize=32768,wsize=32768,timeo= 14,fg,soft,intr 0 0
10.0.0.17:/media/seagate35 /media/net/nfs2 nfs nfsvers=3,proto=tcp,rsize=32768,wsize=32768,timeo= 14,fg,soft,intr 0 0
The automounts.xml was also changed correctly:
<?xml version="1.0" ?>
<mountmanager>
<fstab>
<nfs>
<mount>
<active>True</active>
<hdd_replacement>True</hdd_replacement>
<ip>10.0.0.17</ip>
<sharename>wd</sharename>
<sharedir>media/wd</sharedir>
<options>rw,nolock,tcp</options>
</mount>
</nfs>
<nfs>
<mount>
<active>True</active>
<hdd_replacement>False</hdd_replacement>
<ip>10.0.0.17</ip>
<sharename>nfs</sharename>
<sharedir>media/seagate25</sharedir>
<options>rw,nolock,tcp</options>
</mount>
</nfs>
<nfs>
<mount>
<active>True</active>
<hdd_replacement>False</hdd_replacement>
<ip>10.0.0.17</ip>
<sharename>nfs2</sharename>
<sharedir>media/seagate35</sharedir>
<options>rw,nolock,tcp</options>
</mount>
</nfs>
</fstab>
</mountmanager>
The /hdd symlink points to /media/hdd, which points to /media/net/wd what is correct as well.
Now I have an access to my networked hdd under image manager - so problem is solved.
but
under settings-epg-Crossepg setup I can't select my hdd - it still wants to save database to /etc/crossepg... I can of course do a symlink there to my /media/net/wd but ...
oooppss !
I did the network upgrade from 339 to newest and now box crashes on start the message shows:
Traceback (most recent call last):
File "/usr/lib/enigma2/python/Tools/BoundFunction.py", line 9, in __call__
File "/usr/lib/enigma2/python/Components/Console.py", line 56, in finishedCB
File "/usr/lib/enigma2/python/Components/Console.py", line 43, in eBatchCB
File "/usr/lib/enigma2/python/Plugins/SystemPlugins/NetworkBrowser/AutoMount.py", line 307, in CheckMountPointFinished
File "/usr/lib/enigma2/python/Plugins/SystemPlugins/NetworkBrowser/AutoMount.py", line 240, in CheckMountPoint
TypeError: unsupported operand type(s) for +: 'NoneType' and 'str'
removing automount.xml fixes this issue, but I'm loosing /media/hdd and therefore /hdd link
so, seems the problem is in newest update, because before everything worked.
Adding network mount also fails (crash) like by afc_rich
crashlog:
<?xml version="1.0" encoding="utf-8"?>
<openvix>
<enigma2>
<crashdate>wto paź 23 14:58:06 2012</crashdate>
<compiledate>Oct 20 2012</compiledate>
<contactemail>acid-burn@opendreambox.org</contactemail>
<!-- Please email this crashlog to above address -->
<skin>ViX_Night_HD/skin.xml</skin>
<sourcedate>2012-10-20</sourcedate>
<version>3.0.0</version>
</enigma2>
<image>
<stbmodel>duo</stbmodel>
<kernelversion>
<![CDATA[
Linux vuduo 3.1.1 #1 SMP Sun Sep 30 00:50:10 BST 2012 mips GNU/Linux
]]>
</kernelversion>
<kernelcmdline>bmem=112M ubi.mtd=0 root=ubi0:rootfs rootfstype=ubifs rw console=ttyS0,115200n8 rootflags=sync</kernelcmdline>
<nimsockets>NIM Socket 0:</nimsockets>
<imageversion>
<![CDATA[
box_type=vuduo
build_type=0
version=3.0
build=381
drivers=20120824
date=20121020140810
comment=ViX
target=9
creator=openViX
url=http://www.vuplus-support.co.uk
catalog=http://www.vuplus-support.co.uk
]]>
</imageversion>
<imageissue>
<![CDATA[
Welcome to OpenViX for %h
openvix 3.0 %h
]]>
</imageissue>
</image>
<software>
<enigma2software>
<![CDATA[
Collected errors:
* opkg_conf_load: Could not lock /var/lib/opkg/lock: Resource temporarily unavailable.
]]>
</enigma2software>
<vuplussoftware>
<![CDATA[
Collected errors:
* opkg_conf_load: Could not lock /var/lib/opkg/lock: Resource temporarily unavailable.
]]>
</vuplussoftware>
<gstreamersoftware>
<![CDATA[
Collected errors:
* opkg_conf_load: Could not lock /var/lib/opkg/lock: Resource temporarily unavailable.
]]>
</gstreamersoftware>
</software>
<crashlogs>
<enigma2crashlog>
<![CDATA[
+ (1) Background File Eraser
+ (5) Tuxtxt
+ (8) graphics acceleration manager
+ (9) GFBDC
12150k video mem
- double buffering available!
4050kB available for acceleration surfaces.
resolution: 1280 x 720 x 32 (stride: 5760)
+ (9) gLCDDC
found OLED display!
lcd buffer 0x7ba8e8 8448 bytes, stride 132
+ (9) Font Render Class
[FONT] initializing lib...
[FONT] loading fonts...
[FONT] Intializing font cache, using max. 4MB...
+ (10) gRC
RC thread created successfully
+ (15) eWindowStyleManager
+ (20) DVB-CI UI
+ (20) UHF Modulator
couldnt open /dev/rfmod0!!!!
+ (20) RC Input layer
+ (20) misc options
+ (20) AVSwitch Driver
couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
+ (21) input device driver
Input device "dreambox advanced remote control (native)" is a mouse
Found 1 input devices!
+ (22) Hdmi CEC driver
+ (30) eActionMap
+ (35) CI Slots
scanning for common interfaces..
CI Slot 0 setSource(0)
CI Slot 1 setSource(0)
eDVBCIInterfaces->setInputSource(0, 0)
eDVBCIInterfaces->setInputSource(1, 1)
cannot open /proc/stb/tsmux/input2
cannot open /proc/stb/tsmux/input3
done, found 2 common interface slots
+ (35) CA handler
+ (36) Stream server
+ (40) eServiceCenter
settings instance.
+ (41) eServiceFactoryDVD
+ (41) eServiceFactoryM2TS
+ (41) eServiceFactoryMP3
+ (41) eServiceFactoryFS
+ (41) eServiceFactoryDVB
reached rl 70
---- opening lame channel db
reading services (version 4)
loaded 2631 services
scanning for frontends..
opening frontend 0
detected satellite frontend
close frontend 0
opening frontend 1
detected satellite frontend
close frontend 1
found 1 adapter, 2 frontends(2 sim) and 5 demux, boxtype 4
Use valid Linux Time :) (RTC?)
[EPGC] Initialized EPGCache (wait for setCacheFile call now)
Loading spinners...
[ePNG] couldn't open /usr/share/enigma2/skin_default/spinner/wait20.png
found 19 spinner!
setIoPrio best-effort level 3 ok
couldn't open fp
[Harddisk] enumerating block devices...
Reading satellites.xml
main thread is non-idle! display spinner!
removing internal link on frontend id 1
sec config cleared
setSlotInfo for dvb frontend 0 to slotid 0, descr BCM7335 DVB-S2 NIM (internal), need rotorworkaround No, enabled Yes, DVB-S2 Yes
setSlotInfo for dvb frontend 1 to slotid 1, descr BCM7335 DVB-S2 NIM (internal), need rotorworkaround No, enabled Yes, DVB-S2 Yes
slot: 0 configmode: simple
diseqcmode: diseqc_a_b
slot: 1 configmode: simple
diseqcmode: diseqc_a_b
sec config completed
loading bouquet... /etc/enigma2/bouquets.tv 1
loading bouquet... /etc/enigma2/userbouquet.dbe00.tv 1
200 entries in Bouquet userbouquet.dbe00.tv
loading bouquet... /etc/enigma2/userbouquet.dbe5f.tv 201
174 entries in Bouquet userbouquet.dbe5f.tv
loading bouquet... /etc/enigma2/userbouquet.dbe01.tv 375
158 entries in Bouquet userbouquet.dbe01.tv
loading bouquet... /etc/enigma2/userbouquet.dbe2a.tv 533
73 entries in Bouquet userbouquet.dbe2a.tv
loading bouquet... /etc/enigma2/userbouquet.dbe3d.tv 606
55 entries in Bouquet userbouquet.dbe3d.tv
loading bouquet... /etc/enigma2/userbouquet.dbe02.tv 661
130 entries in Bouquet userbouquet.dbe02.tv
loading bouquet... /etc/enigma2/userbouquet.dbe23.tv 791
137 entries in Bouquet userbouquet.dbe23.tv
loading bouquet... /etc/enigma2/userbouquet.dbe03.tv 928
196 entries in Bouquet userbouquet.dbe03.tv
loading bouquet... /etc/enigma2/userbouquet.dbe04.tv 1124
73 entries in Bouquet userbouquet.dbe04.tv
loading bouquet... /etc/enigma2/userbouquet.dbe05.tv 1197
89 entries in Bouquet userbouquet.dbe05.tv
loading bouquet... /etc/enigma2/userbouquet.dbe0f.tv 1286
87 entries in Bouquet userbouquet.dbe0f.tv
loading bouquet... /etc/enigma2/userbouquet.dbe2c.tv 1368
155 entries in Bouquet userbouquet.dbe2c.tv
loading bouquet... /etc/enigma2/userbouquet.dbe06.tv 1518
50 entries in Bouquet userbouquet.dbe06.tv
loading bouquet... /etc/enigma2/userbouquet.dbe07.tv 1568
46 entries in Bouquet userbouquet.dbe07.tv
loading bouquet... /etc/enigma2/userbouquet.dbe37.tv 1614
46 entries in Bouquet userbouquet.dbe37.tv
loading bouquet... /etc/enigma2/userbouquet.dbe08.tv 1659
131 entries in Bouquet userbouquet.dbe08.tv
loading bouquet... /etc/enigma2/userbouquet.dbe12.tv 1790
71 entries in Bouquet userbouquet.dbe12.tv
loading bouquet... /etc/enigma2/userbouquet.dbe2b.tv 1861
62 entries in Bouquet userbouquet.dbe2b.tv
loading bouquet... /etc/enigma2/userbouquet.dbe09.tv 1923
228 entries in Bouquet userbouquet.dbe09.tv
loading bouquet... /etc/enigma2/userbouquet.dbe10.tv 2150
32 entries in Bouquet userbouquet.dbe10.tv
loading bouquet... /etc/enigma2/userbouquet.dbe13.tv 2182
139 entries in Bouquet userbouquet.dbe13.tv
loading bouquet... /etc/enigma2/userbouquet.dbe14.tv 2321
42 entries in Bouquet userbouquet.dbe14.tv
loading bouquet... /etc/enigma2/userbouquet.dbe15.tv 2363
77 entries in Bouquet userbouquet.dbe15.tv
loading bouquet... /etc/enigma2/userbouquet.dbe16.tv 2440
205 entries in Bouquet userbouquet.dbe16.tv
loading bouquet... /etc/enigma2/userbouquet.dbe17.tv 2645
54 entries in Bouquet userbouquet.dbe17.tv
loading bouquet... /etc/enigma2/userbouquet.dbe18.tv 2699
69 entries in Bouquet userbouquet.dbe18.tv
loading bouquet... /etc/enigma2/userbouquet.dbe81.tv 2768
63 entries in Bouquet userbouquet.dbe81.tv
loading bouquet... /etc/enigma2/userbouquet.dbe19.tv 2831
50 entries in Bouquet userbouquet.dbe19.tv
loading bouquet... /etc/enigma2/userbouquet.dbe20.tv 2881
66 entries in Bouquet userbouquet.dbe20.tv
loading bouquet... /etc/enigma2/userbouquet.dbe21.tv 2947
28 entries in Bouquet userbouquet.dbe21.tv
loading bouquet... /etc/enigma2/userbouquet.dbe22.tv 2975
21 entries in Bouquet userbouquet.dbe22.tv
loading bouquet... /etc/enigma2/userbouquet.dbe24.tv 2996
41 entries in Bouquet userbouquet.dbe24.tv
loading bouquet... /etc/enigma2/userbouquet.dbe25.tv 3037
39 entries in Bouquet userbouquet.dbe25.tv
loading bouquet... /etc/enigma2/userbouquet.dbe26.tv 3075
46 entries in Bouquet userbouquet.dbe26.tv
loading bouquet... /etc/enigma2/userbouquet.dbe27.tv 3121
157 entries in Bouquet userbouquet.dbe27.tv
loading bouquet... /etc/enigma2/userbouquet.dbe28.tv 3278
123 entries in Bouquet userbouquet.dbe28.tv
loading bouquet... /etc/enigma2/userbouquet.dbe29.tv 3401
27 entries in Bouquet userbouquet.dbe29.tv
loading bouquet... /etc/enigma2/userbouquet.dbe30.tv 3428
19 entries in Bouquet userbouquet.dbe30.tv
loading bouquet... /etc/enigma2/userbouquet.dbe31.tv 3447
42 entries in Bouquet userbouquet.dbe31.tv
loading bouquet... /etc/enigma2/userbouquet.dbe32.tv 3488
162 entries in Bouquet userbouquet.dbe32.tv
loading bouquet... /etc/enigma2/userbouquet.dbe33.tv 3650
23 entries in Bouquet userbouquet.dbe33.tv
loading bouquet... /etc/enigma2/userbouquet.dbe0e.tv 3673
11 entries in Bouquet userbouquet.dbe0e.tv
loading bouquet... /etc/enigma2/userbouquet.dbe0a.tv 3684
71 entries in Bouquet userbouquet.dbe0a.tv
loading bouquet... /etc/enigma2/userbouquet.dbe0b.tv 3755
6 entries in Bouquet userbouquet.dbe0b.tv
loading bouquet... /etc/enigma2/userbouquet.dbe65.tv 3761
37 entries in Bouquet userbouquet.dbe65.tv
loading bouquet... /etc/enigma2/userbouquet.dbe7f.tv 3798
297 entries in Bouquet userbouquet.dbe7f.tv
loading bouquet... /etc/enigma2/userbouquet.dbe6b.tv 4082
12 entries in Bouquet userbouquet.dbe6b.tv
loading bouquet... /etc/enigma2/userbouquet.dbe00.radio 4092
can't open /etc/enigma2/userbouquet.dbe00.radio: No such file or directory
loading bouquet... /etc/enigma2/userbouquet.dbe01.radio 2
can't open /etc/enigma2/userbouquet.dbe01.radio: No such file or directory
loading bouquet... /etc/enigma2/userbouquet.dbe04.radio 2
can't open /etc/enigma2/userbouquet.dbe04.radio: No such file or directory
loading bouquet... /etc/enigma2/userbouquet.dbe05.radio 2
can't open /etc/enigma2/userbouquet.dbe05.radio: No such file or directory
loading bouquet... /etc/enigma2/userbouquet.dbe06.radio 2
can't open /etc/enigma2/userbouquet.dbe06.radio: No such file or directory
loading bouquet... /etc/enigma2/userbouquet.dbe07.radio 2
can't open /etc/enigma2/userbouquet.dbe07.radio: No such file or directory
loading bouquet... /etc/enigma2/userbouquet.dbe09.radio 2
can't open /etc/enigma2/userbouquet.dbe09.radio: No such file or directory
loading bouquet... /etc/enigma2/userbouquet.dbe0c.radio 2
can't open /etc/enigma2/userbouquet.dbe0c.radio: No such file or directory
loading bouquet... /etc/enigma2/userbouquet.dbe10.radio 2
can't open /etc/enigma2/userbouquet.dbe10.radio: No such file or directory
loading bouquet... /etc/enigma2/userbouquet.dbe11.radio 2
can't open /etc/enigma2/userbouquet.dbe11.radio: No such file or directory
loading bouquet... /etc/enigma2/userbouquet.dbe12.radio 2
can't open /etc/enigma2/userbouquet.dbe12.radio: No such file or directory
loading bouquet... /etc/enigma2/userbouquet.dbe13.radio 2
can't open /etc/enigma2/userbouquet.dbe13.radio: No such file or directory
loading bouquet... /etc/enigma2/userbouquet.dbe14.radio 2
can't open /etc/enigma2/userbouquet.dbe14.radio: No such file or directory
loading bouquet... /etc/enigma2/userbouquet.dbe15.radio 2
can't open /etc/enigma2/userbouquet.dbe15.radio: No such file or directory
loading bouquet... /etc/enigma2/userbouquet.favourites.tv 2
0 entries in Bouquet userbouquet.favourites.tv
62 entries in Bouquet bouquets.tv
loading bouquet... /etc/enigma2/bouquets.radio 1
loading bouquet... /etc/enigma2/userbouquet.favourites.radio 1
0 entries in Bouquet userbouquet.favourites.radio
1 entries in Bouquet bouquets.radio
[Time By]: Transponder
[Ipkg] Added to OPKG destinations: /
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Regular)
[FONT] adding font /usr/share/fonts/andale.ttf...OK (Fixed)
[FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
[FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)
[FONT] adding font /usr/share/enigma2/ViX_HD_Common/fonts/Roboto-Bold.ttf...OK (Regular)
[FONT] adding font /usr/share/enigma2/ViX_HD_Common/fonts/Roboto-BoldItalic.ttf...OK (Italic)
[FONT] adding font /usr/share/enigma2/ViX_HD_Common/fonts/Roboto-Black.ttf...OK (Bold)
[FONT] adding font /usr/share/enigma2/ViX_HD_Common/fonts/Roboto-BlackItalic.ttf...OK (Boldit)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Subtitlefont)
[FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD)
[FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)
[FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
[FONT] adding font /usr/share/fonts/valis_enigma.ttf...OK (Subs)
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
Activating keymap: Default (US)
Activating language Polski
--> setting scaler_sharpness to: 0000000D
[EPGC Load] Poller disabled.
[EPGC Save] Poller disabled.
[EPGC] setCacheFile read/write epg data from/to '/etc/enigma2/epg.dat'
[EPGC] time updated.. start EPG Mainloop
couldn't open /proc/stb/misc/12V_output
setLCDBrightness 25
setLCDBrightness 127
Setting OSD position:18 684 15 547
Setting 3D mode: auto
Setting 3D depth: 50
Setting OSD alpha: 255
[EPGC Save] Poller disabled.
[EPGC Load] Poller disabled.
FIXME: request for unknown slot
FIXME: request for unknown slot
[IMDb] fallback to default translation for IMDb Details
[IMDb] fallback to default translation for Query details from the Internet Movie Database
[IMDb] fallback to default translation for IMDb Details
[IMDb] fallback to default translation for Query details from the Internet Movie Database
[EPGC] 46323 events read from /etc/enigma2/epg.dat
Plugin Extensions/WebInterface failed to load: No module named plugin
Plugin probably removed, but not cleanly in /usr/lib/enigma2/python/Plugins/Extensions/WebInterface
[CrossEPG] set language to pl
--> setting contrast to: 00008000
--> setting saturation to: 00008000
--> setting hue to: 00008000
--> setting brightness to: 00008000
--> setting block_noise_reduction to: 00000000
--> setting mosquito_noise_reduction to: 00000000
--> setting digital_contour_removal to: 00000000
--> setting splitmode to: off
--> setting sharpness to: 00000000
--> setting auto_flesh to: 00000000
--> setting green_boost to: 00000000
--> setting blue_boost to: 00000000
--> setting dynamic_contrast to: 00000000
--> applying pep values
getModeList for port DVI-PC
getModeList for port YPbPr
getModeList for port Scart
getModeList for port DVI-PC
getModeList for port DVI
hotplug on dvi
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
setMode - port: DVI mode: 1080i rate: multi
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
[EPGImport] autostart (0) occured at 1351000684.07
[AutoTimer] Auto Poll Enabled
[SoftcamManager] AutoStart Enabled
[CI_Assignment] activating ci configs:
[CI_Activate] FOUND 2 CI Slots
[CI_Activate_Config_CI0] no config file found
[CI_Activate_Config_CI0] error parsing xml...
[CI_Activate_Config_CI1] no config file found
[CI_Activate_Config_CI1] error parsing xml...
starting hotplug handler
[PowerManager] AutoStart Enabled
[ImageManager] AutoStart Enabled
[ImageManager] Backup Schedule Disabled at (now=wto, 23 paź 2012, 14:58:04)
[BackupManager] AutoStart Enabled
[BackupManager] Backup Schedule Disabled at (now=wto, 23 paź 2012, 14:58:04)
[EPGImport] autostart (0) occured at 1351000684.45
[EPGImport] WakeUpTime now set to -1 (now=1351000684)
[ePNG] couldn't open /usr/share/enigma2/ico_dvb_s-fs8.png
[ePNG] couldn't open /usr/share/enigma2/ico_dvb_c-fs8.png
[ePNG] couldn't open /usr/share/enigma2/ico_dvb_t-fs8.png
[ePNG] couldn't open /usr/share/enigma2/ico_service_group-fs8.png
RemovePopup, id = ZapError
[Skin] Attribute not implemented: alphatest value: blend
setValue 15
Setvolume: 100 100 (raw)
Setvolume: 0 0 (-1db)
Setvolume: 15 15 (raw)
Setvolume: 54 54 (-1db)
[LogManager] Poll Started
playing 1:0:1:32E3:190:13E:820000:0:0:0:
[LogManager] probing folders
RemovePopup, id = ZapError
allocate channel.. 0190:013e
opening frontend 0
[LogManager] found following log's: ['/media/net/wd/logs', '/media/net/nfs2/logs', '/home/root/logs']
[LogManager] looking in: /media/net/wd/logs
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 11278000 Pol 1 SR 27500000 INV 2 FEC 3 orbpos 130 system 1 modulation 2 pilot 2, rolloff 0
tuning to 1528 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:32E3:190:13E:820000:0:0:0:
allocate demux
[LogManager] looking in: /media/net/nfs2/logs
[LogManager] looking in: /home/root/logs
eHdmiCEC: received message
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 31(16)
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 36(16)
child has terminated
pipes closed
[eBatch] retval=0, cmds left=1, data:
poll: unhandled POLLERR/HUP/NVAL for fd 42(16)
[SEC] set static current limiting
child has terminated
pipes closed
0.0.0.0
10.0.0.
[OpenWebif] loading external plugins...
[OpenWebif] no plugins to load
[OpenWebif] started on 80
poll: unhandled POLLERR/HUP/NVAL for fd 32(16)
job Components.Task.Job name=LogManager #tasks=1 completed with [] in None
set sequence pos 3
executing opkg --add-dest /:/ update
child has terminated
pipes closed
[eBatch] retval=0, cmds left=0, data:
Traceback (most recent call last):
File "/usr/lib/enigma2/python/Tools/BoundFunction.py", line 9, in __call__
File "/usr/lib/enigma2/python/Components/Console.py", line 56, in finishedCB
File "/usr/lib/enigma2/python/Components/Console.py", line 43, in eBatchCB
File "/usr/lib/enigma2/python/Plugins/SystemPlugins/NetworkBrowser/AutoMount.py", line 307, in CheckMountPointFinished
File "/usr/lib/enigma2/python/Plugins/SystemPlugins/NetworkBrowser/AutoMount.py", line 240, in CheckMountPoint
TypeError: unsupported operand type(s) for +: 'NoneType' and 'str'
(PyObject_CallObject(<Tools.BoundFunction.boundFunction instance at 0x14cd5f8>,(0,)) failed)
getResolvedKey config.plugins.crashlogautosubmit.sendAnonCrashlog failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addNetwork failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addWlan failed !! (Typo??)
]]>
</enigma2crashlog>
</crashlogs>
</openvix>
Thanks for the responses guys. Glad I'm not alone.
Rob van der Does
25-10-12, 06:22
As none of our testers can reproduce any problems in this area, I would suggest to try again using build 385.
Deleting automount.xml is not a problem at all: the internal HDD will re-appear. I did this many times, and it never had any influence on the HDD (as that mount is in fstab). However if you do experience problems, go to the mountmanager and set the correct mount for the HDD.
hmm, I'll try- for now I reverted to VTI 2.4 backup - w/o network hdd and recording my wife will kill me(she needs to record her favourite boring TV series)
Where to find build 385 ? on openvix (http://www.world-of-satellite.com/enigma2/openvix/index.php?dir=Vu%2BDuo/) the latest is 381
Hi Guys,
In my case i could solve the issue when havin an empty network mountmanager, by deleting the automounts.xml in etc/enigma2
The restart E2 and start again..with adding network hdd with mountmanager
cheers, this worked for me.
did everything again from scratch.
Downloaded 381, updated online, setted up all mounts manually and everything works. /hdd and /media/hdd are correctly mounted.
minor issue - despite of exiting /hdd/picon folder - no picons are visible. Solution: ln -s /media/hdd/picon /picon
minor issue - despite of exiting /hdd/picon folder - no picons are visible. Solution: ln -s /media/hdd/picon /picon
Storing your picons on the HDD isn't the best of ideas, much better storing them on flash or usb stick.
Rob van der Does
25-10-12, 18:20
Any folder /picon should work.
And indeed: for practical reasons, HDd is the worst (= slowest possible) location. Flash is the best, USB is fine as well.
Anyway: /picon/picon is not the idea.
Now running build 385 and I am no longer getting the crash when entering the network mounts menu. Thank you to everyone who looked into this.
sorry, /media/hdd/picon does NOT work for me.
Just to be sure, I setted up everything using remote (not editing directly the fstab, automount.xml as usual) to prevent errors in configuration. My "networked hdd" has been mounted under /media/hdd due to "use as hdd replacement" option. So it SHOULD be treaten as "physical device", right ?
For sure:
1. /picon directory under root dir my "networked hdd" does not work. But /picon under main STB root works, so i had to make a symlink :
root@vuduo:/# ls -l
drwxr-xr-x 2 root root 160 Oct 13 09:10 autofs
drwxr-xr-x 2 root root 5072 Oct 13 09:10 bin
drwxr-xr-x 2 root root 160 Sep 29 21:43 boot
drwxr-xr-x 12 root root 3680 Jan 1 1970 dev
drwxr-xr-x 36 root root 6464 Oct 28 15:11 etc
lrwxrwxrwx 1 root root 9 Oct 13 09:10 hdd -> media/hdd
drwxr-sr-x 3 root root 224 Oct 13 09:10 home
drwxr-xr-x 5 root root 4832 Oct 27 03:02 lib
drwxrwxrwt 4 root root 80 Jan 1 1970 media
lrwxrwxrwx 1 root root 5 Oct 13 09:10 mnt -> media
lrwxrwxrwx 1 root root 25 Oct 25 18:44 picon -> /media/hdd/picon/
dr-xr-xr-x 89 root root 0 Jan 1 1970 proc
drwxr-xr-x 2 root root 5856 Oct 25 17:53 sbin
lrwxrwxrwx 1 root root 10 Oct 27 14:55 share -> /usr/share
drwxr-xr-x 11 root root 0 Jan 1 1970 sys
lrwxrwxrwx 1 root root 8 Jan 1 1970 tmp -> /var/tmp
drwxr-xr-x 13 root root 880 Oct 27 21:13 usr
drwxr-xr-x 7 root root 1128 Oct 19 18:43 var
2. Image manager does not want to work with /media/hdd ("problem with device"). Interesting, my other nfs mounts work under image manager.
3. Crossepg does not see any hdd in system - it still wants to save the database under /etc/enigma2/crossepg, what is pretty bad. So another symlink to /media/hdd solves the problem.
Output of "mount" command:
root@vuduo:/# mount
rootfs on / type rootfs (rw)
ubi0:rootfs on / type ubifs (rw,sync,relatime)
devtmpfs on /dev type devtmpfs (rw,relatime,size=69072k,nr_inodes=17268,mode=755)
proc on /proc type proc (rw,relatime)
sysfs on /sys type sysfs (rw,relatime)
tmpfs on /media type tmpfs (rw,relatime,size=64k)
tmpfs on /var/volatile type tmpfs (rw,relatime)
usbfs on /proc/bus/usb type usbfs (rw,relatime)
devpts on /dev/pts type devpts (rw,relatime,gid=5,mode=620)
nfsd on /proc/fs/nfsd type nfsd (rw,relatime)
10.0.0.17:/media/wd/ on /media/hdd type nfs (rw,relatime,vers=3,rsize=32768,wsize=32768,namlen =255,soft,nolock,proto=tcp,port=65535,timeo=14,ret rans=3,sec=sys,local_lock=all,addr=10.0.0.17)
10.0.0.17:/media/seagate25/ on /media/net/nfs type nfs (rw,relatime,vers=3,rsize=32768,wsize=32768,namlen =255,soft,nolock,proto=tcp,port=65535,timeo=14,ret rans=3,sec=sys,local_lock=all,addr=10.0.0.17)
10.0.0.17:/media/seagate35/ on /media/net/nfs2 type nfs (rw,relatime,vers=3,rsize=32768,wsize=32768,namlen =255,soft,nolock,proto=tcp,port=65535,timeo=14,ret rans=3,sec=sys,local_lock=all,addr=10.0.0.17)
root@vuduo:/#
on screenshots below "tak" means "yes", "włącz" means "enabled".
20550205512055220553
Rob van der Does
28-10-12, 22:08
Do you have a HDD?
What does mountmanager say?
What is the ouput of 'df -h'?
As I mentioned above, I DON'T have a physical hdd, only nfs share acting as hdd instead.
Shares are running on small linux server based on Fedora Linux.
Mountmanager shows completely nothing.
Output of STB's "df -h" is pretty similar to "mount"
Filesystem Size Used Available Use% Mounted on
ubi0:rootfs 102.1M 56.5M 45.6M 55% /
devtmpfs 67.5M 4.0K 67.4M 0% /dev
tmpfs 64.0K 0 64.0K 0% /media
tmpfs 67.6M 448.0K 67.1M 1% /var/volatile
10.0.0.17:/media/wd/ 196.9G 74.6G 112.3G 40% /media/hdd
10.0.0.17:/media/seagate25/
458.4G 344.4G 90.7G 79% /media/net/nfs
10.0.0.17:/media/seagate35/
458.4G 193.9G 241.3G 45% /media/net/nfs2
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.