minimal image effort for a 28.2E setup??

[keratos]

So if I wanted to flash an image that presented the minimal effort for a 28.2E setup , which image and version would be the most appropriate.
Regards

[sivhead]

If your're talking about an open enigma setup such as vu plus, gigablue, then you will get good support from this site, with the VIX image from this site. I would personally always use the latest image Download your image from here

http://www.world-of-satellite.com/forumdisplay.php?299-ViX-Team-Image-Downloads
stick it on a usb key

Insert USB key into your usb port of your compatible satellite box (obviously using the correct image)
Power on the switch wait for about 5 minutes until the screen says “finished remove usb”.
Select HDMI using the remote control.
Select 1080i
Select English UK
Click continue to everything else.(we will set this up later to get used to the menus).
Menu > Set-up > Service Searching >Tuner Configuration.
Tuner A
Configuration mode = Simple
Mode = Single
Satellite 28.2 Eutelsat 28a & astra 1n/2a/2b
Send Diseqc No
Ok Exit
Menu > Set-up > Service Searching > Automatic scan
Scan Tuner A.
Go and make a cup of tea…..

Menu>Setup>system>network>Samba
Install yes

For a vuduo
From your pc click start and type
\\vuduo\root or if its not a vuduo use the ip address \\192.168.2.1\root (or whatever the ip address is you can get this from Menu > Setup > system > network > Device Setup > Adapter settings)
Copy CCCam.cfg to etc folder
Copy Mgcamd files to usr\keys
Copy vix cam install files to tmp (download here
http://www.4shared.com/dir/wnyHV50A/VIX_CAMS.html).

From sat box
Menu > Setup > Vix > Install Local extension
Install extensions such as cccam mgcamd
Menu setup softcam
Softcam manager
Start MGCAMd and Enable startup.

Menu Plugins download Green button to download plugins download Auto bouquet creator (this is for 28.2).
Menu Plugins autoboquet Select your region.
Wait for message Execution finished (could take 5 minutes).

Menu >Setup> System > EPG >
EPG/Location /media/usb (save)
(Exit) Menu > Setup>System >Epg> CrossEPG> Configure
Enable CSV import yes
Schedule download once a day
Exit
Load/Save
Save EPG (yes to save to USB)

Exit all the way out to watch tv press the blue button select cross epg downloader
Menu > Setup >system > Online update >
Allow unstable (yes)

Menu >Plugins > download plugins
VIX > Magic HD

Menu >Setup>Skin Setup >Magic HD
Yes to restart Gui.

Job done..

[sivhead]

sorry I was reading the new posts section and didnt realize this was in the qbox section.... damn it took me ages as well.. The above tutorial will not work for the qbox only the vix images

[Larry-G]

sorry I was reading the new posts section and didnt realize this was in the qbox section.... damn it took me ages as well..

LOL all i can say is that i have done the very same once or twice my self.