View Full Version : vu+duo wont boot
hi newbie here ,my vu+duo is stuck in loop between green crash screen and the blackhole gui starting just flick between the two , anybody know how i can fix it , thx
basilyoung
13-10-12, 22:05
think you need to reimage the unit, how old is it, and when was it last updated?
you might need to load the latest bootloader,
Conaxthewarrior
13-10-12, 22:08
Just flashed mine as I had a hanging problem for the first time. I re read in the bootloader and image and the reciever's now 100% ok.. Mabe you should also reflash from new and setup accordingly, it should work.
got it new last march i havent updated it , it blackhole 1.72 i think , basic it came really to go and i turned on , if i reimage it willthat wipe the box clean? thx
basilyoung
13-10-12, 22:16
yes the unit will be totally clean, all settings etc will be lost
but you might be able to ftp into the unit to retreave any files you might need
basilyoung
13-10-12, 22:18
but if you put on the latest bootloader,...this might fix your unit, and it will be as it was..if this is the case...get copies of you soft cam configs saved to computer
thx basil i was afraid you said that ,
basilyoung
13-10-12, 22:24
one other thing to try,...is leave the unit switch off for say 10 minutes, then try and boot it up again
i try that first . thanks ,
i try that first . how easy or hard to setup from scratch thanks ,
basilyoung
13-10-12, 22:41
very easy, but here, we would recomend VIX 3...but thats up to you, as to which image you use
the first thing to do is update the boot loader..if thats what you want to do, I will post links for you
wont able to it till the mornin, but need to sort out.thx
basilyoung
13-10-12, 22:57
one more thing
where did you get the unit, and how much was it?
you might of been sold a clone
440 euro online dont think its a clone from a supplier online from ireland great support from him .
Have you done anything like tried adding/changing skin? might be looping, Cause it don't like the skin...
If you can telnet in to box, issue init 4 command, and then type enigma2, it will run e2 and give you all debug logs before crashing. Alternat9vely, uplad one of the logs from the green screen, and we can try and help you more with why it's crashing...
Sent from my iPad using Tapatalk HD
yea i adding a plugin , i take a pic in da the morning and il
upload it thx
yea i adding a plugin , i take a pic in da the morning and il
upload it thx
it'd be easier to FTP in, and u-load the crash file
Sent from my iPad using Tapatalk HD
FTP in, and u-load the crash file , sorry how do i do that . i just downloaded Vu+ Control Centre for Vu+ Duo is this what i need for ftp, thx
mickyblueys
13-10-12, 23:54
Filezilla or flashfxp are better.
Sent from my GT-I9100 using Tapatalk 2
where do i load crash file
where do i load crash file
It'll more than likely be in /media/hdd
Sent from my HTC Sensation XE with Beats Audio using Tapatalk 2
20228 here the green screen log
Rob van der Does
14-10-12, 15:14
Screenie shows a segfault: unfortunately that doesn't help in finding the problem.
It might be due to a memory problem: can you enable a SWAP-file and see how that goes?
i tried to access the the box but cant access it through dream control center
hi its doing after i do this" init 4 command, and then type enigma2, it will run e2 i get the on the pc screen do i need to anything else "20229 i reboot vu but still the same
To be honest if i were you i would cut my losses with the existing image, FTP into the box and retrieve any files you need such as Cam config files, then re-flash either the same image or another.
Rob van der Does
14-10-12, 16:50
The message 'Killed' implies a severe memory problem.
how can i fix that or should i do as pheonix says ,if so where are the Cam config files stored and is there any thing i need to save before i flash
Autotimers - /etc
CCcam cfg file / etc
oscam files in /var/tuxbox and config folder.
Thanks everyone for help ,i bit the bullet and did a reflash and back working now
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.