USB Flash

[fs1]

Hi all

Not sure what to do from guide from February about flashing new image as files in recent image updates are not the same.

To update box with any new image but lets say latest OpenVIX or OpenAAF. There are 5 files in se folder, do these files need to be copied to root then usb in box, power off and hit ok on box after message on vdu.

Any help would be most appreciated

regards
fs1

[Sicilian]

Copy gigablue folder to usb stick, follow front LCD instructions.

[fs1]

Did that mate USB lit in LCD for a sec then box booted to loaded image

[Mr. Mister]

Format the USB stick in FAT32 again..

Then again load image to root of USB stick..

Also.. Make sure no other USB devices are connected..

[fs1]

ok mate tried different usb stick then pressed ok button on box whilst "conf" was showing in lcd. worked a treat. many thanks.

spoke to soon. put aaf image on box all ok except certain buttons on remote when pressed give green reboot screen. any ideas anyone?

[Mr. Mister]

Sorry buddy.. Never even seen the AAF image.. so am no help there what-so-ever..

[wullboy]

ok mate tried different usb stick then pressed ok button on box whilst "conf" was showing in lcd. worked a treat. many thanks.

spoke to soon. put aaf image on box all ok except certain buttons on remote when pressed give green reboot screen. any ideas anyone?

Image may be corrupt, go a re-install the image, and see if you get the same error ??

[humaxdriver]

Do we need to rename any folder in usb and copy files in that folder ? or after formating usb just copy files insisde usb.Thanks

[Mr. Mister]

Just copy the files as is.. you do NOT need to rename anything..

As soon as you open the zipped file.. The 1st folder should be called " gigablue "

Just put that on root.. and flash..