PDA

View Full Version : confusing???????


martyd
09-09-10, 11:54
probably missing the obvious here but i will ask, just changed image and installed latest catseye settings now i have no 28.2, bouquet is there but channels greyed out, tuner b config is single sat 28.2 is there a problem with catseyes and vti?
jjp2701
09-09-10, 12:14
reboot your box after putting a sat motor list settings, then change sat to something like 19.2e, then go back to 28.2e and check m8
martyd
09-09-10, 12:17
done that, its just 28.2, done manual scan of 28.2 it grabbed channels fine. must be the bouquet i have had this with 0.8 before being describd as 1 west seems to confuse things
dasteelman
09-09-10, 13:17
This is a problem with the satellites.xml file. I used to have this issue on Enigma 1 all the time, for 28e and 1w.

when you download a new image it will have the satellites.xml file installed ...so on 28'E..this could well be 28.2'E ...and for Thor this could wello be 0.8'....

now when you update with 'catseyes' settings.....the channels on 28'E may well be 28.4' (different to 28.2') ... thor may well be set as 1.0W (different to 0.8')...this is where the conflict happens.

This is what I used to do on enigma 1 boxes:-

1 - upload my favourite image

2 - remove Astra 2 and Thor from Satellite settings (on screen)

3 - upload my favourite settings

4 - Reboot....


I am sure it will be a similar principle for E2
martyd
09-09-10, 17:11
suspect your bang on, might try another settings file out of curiosity i use to just do a manual scan of 0.8 and it would fix it no luck this time though i have 4.8 missing too
martyd
09-09-10, 18:32
thor is 0.9 in the sat xml 4.8 is 5 but astra is ok this is weird now tried 3 lots of settings
bassethound
09-09-10, 20:35
Try using Dreamset i find you get less errors transferring files you can find it HERE

http://www.vuplus-support.co.uk/showthread.php?1987-Dreamset-2.30
martyd
09-09-10, 21:34
these are not ftp errors are they? the sat file has wrong info, is it ok just to edit these errors
yngvekl
09-09-10, 22:22
thor is 0.9 in the sat xml 4.8 is 5 but astra is ok this is weird now tried 3 lots of settings

No, thor on 0.8W...

−
<!--

file generated on thursday, 9th of september 2010, 21:19:26 [GMT]
by online satellites.xml generator @ http://satellites-xml.eu
please let us know if you find any inconsistencies in this file
-->
−
<satellites>
−
<sat name="Thor 5/6/Intelsat 10-02 (0.8W)" flags="0" position="-8">
<transponder frequency="3977000" symbol_rate="17777000" polarization="0" fec_inner="3" system="0" modulation="1"/>
<transponder frequency="3985000" symbol_rate="4000000" polarization="1" fec_inner="3" system="0" modulation="1"/>

Excerpt form just downloaded sat file...

/Yngve
martyd
10-09-10, 06:55
no the vti xml is wrong
Sicilian
10-09-10, 06:59
have you not transferred Catseyes satellites.xml file to your Duo?
martyd
10-09-10, 09:46
never had to do that before sic but figured it out this morning cheers