View Full Version : [ET9x00] stuck on bootloader screen
mark_hopley
24-08-12, 10:12
I was running vix 2.4 and have just re-flashed to the new 3.0 but the box will not boot up. It is stuck on the xtrend screen that say bootloader ..... at the bottom.
Have I missed something?
mark_hopley
24-08-12, 10:34
It now wont boot at all no metter which image I throw at it. The image flashes ok but then wont boot up.
i don`t want to worry you but that sounds like a clone!
i don`t want to worry you but that sounds like a clone!
Theres no such thing a ET9x00 clone!
@ Mark, try to force flash the bootloader, press down button instead of up button. Then re-flash image. Also try another USB stick.
No doubt you doing this but make sure no other usb stick attached and no setting restore either.
mark_hopley
24-08-12, 16:16
Have gone away for weekend with wife but will try these when i return on Monday. fingers crossed
Thanks for replies guys
mark_hopley
27-08-12, 16:11
Cheers fellas
Force flashed the bootloader (didn't know you had to press down arrow for this) and used a different usb.
All back to normal again ..... thank god! Safe from the missus again! :)
Theres no such thing a ET9x00 clone!
@ Mark, try to force flash the bootloader, press down button instead of up button. Then re-flash image. Also try another USB stick.
Can you please explain excactly how to perform this operation..?
Don't know when to push which up/down button.
Do you have a link to a user manual..?
i got same problem i tried lates bootloader images but still not working stuck on booting please can anyone help me
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.