View Full Version : webmedia
mikehunt43
22-08-12, 11:33
with the new vix 3.0.webmedia and channel 1 and ts panel none of them show up in plugins
Rob van der Does
22-08-12, 12:12
1Channel works fine. Did you install it from the feeds?
Hi,
webmedia also fine. Have you tried WebMedia 8.1 for OE 2? TS panel must be changed by the author to be compatible with OE2/OpenViX 3.
To see your problems copy the ipk“s to the tmp directory of your box, connect with telnet and use opkg install <paket> to install it.
ciao
Rob van der Does
22-08-12, 12:17
webmedia also fine. Have you tried WebMedia 8.1 for OE 2?
Is that the version we have on our feeds? And if not: could you upload the ipk here please?
mikehunt43
22-08-12, 13:01
Hi,
webmedia also fine. Have you tried WebMedia 8.1 for OE 2? TS panel must be changed by the author to be compatible with OE2/OpenViX 3.
To see your problems copy the ipk“s to the tmp directory of your box, connect with telnet and use opkg install <paket> to install it.
ciaohi ok weill try thank you.how you get to telenet on the box??
mikehunt43
22-08-12, 13:08
no no feeds ipk as normal then comes up with bad magic number in usr/lib/engima2/python/pluginsextensions/webmedia/plugin.pyo and the same for channel it says the same
Hi,
bad magic number is most of the time a sign that it is without source and for a different python version.
Find attached 8.1 for OE 2 / OpenViX 3.
ciao
Rob van der Does
22-08-12, 13:44
Thanks Trial, that indeed is the same one as is on the feeds.
I just flashed my UNO again, and install of 1channel was fine.
mikehunt43
22-08-12, 14:25
thank you that worked and i also reflashed and 1 channel worked as well
Hi,
bad magic number is most of the time a sign that it is without source and for a different python version.
Find attached 8.1 for OE 2 / OpenViX 3.
ciao
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.