fiery
04-09-10, 16:06
It seems that vu+ duo with OpenPli 2010-07-25-master can't recognize my external HDD SAMSUNG STORY STATION PLUS 1.5TB (HX-DE015EB/A62), connected through eSata. HDD runs and lights up when vu+ starts, but it doesn't appear in the recognized drives. I formatted the drive in ext3 format using gparted on my laptop first.
VU+ duo has also an internal SAMSUNG HD502HJ HDD which works fine. However, I purchased a new eSata HDD 1.5TB to have more space for recordings. Here is what the dmesg command outputs:
brcm-pm: enabling power to SATA block
sata_svw 0000:01:00.0: version 4.0
sata_svw 0000:01:00.0: delay 1 second.
ata1: SATA max UDMA/133 cmd 0xB0510000 ctl 0xB0510020 bmdma 0xB0510030 irq 42
ata2: SATA max UDMA/133 cmd 0xB0510100 ctl 0xB0510120 bmdma 0xB0510130 irq 42
scsi0 : sata_svw
JFFS2 notice: (22) check_node_data: wrong data CRC in data node at 0x067d6800: ead 0x21d87be5, calculated 0x4218b1a.
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl F0000)
scsi1 : sata_svw
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl F0000)
ata2.00: ATA-8, max UDMA/133, 976773168 sectors: LBA48 NCQ (depth 0/32)
ata2.00: configured for UDMA/133
Vendor: ATA Model: SAMSUNG HD502HJ Rev: 1AJ1
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: sda1
sd 1:0:0:0: Attached scsi disk sda
sd 1:0:0:0: Attached scsi generic sg0 type 0
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
NTFS driver 2.1.27 [Flags: R/W MODULE].
cdfs 2.6.18 loaded.
JFFS2 notice: (22) check_node_data: wrong data CRC in data node at 0x06dc1000: ead 0x98d98ca6, calculated 0x449971f1.
Any help is appreciated.
VU+ duo has also an internal SAMSUNG HD502HJ HDD which works fine. However, I purchased a new eSata HDD 1.5TB to have more space for recordings. Here is what the dmesg command outputs:
brcm-pm: enabling power to SATA block
sata_svw 0000:01:00.0: version 4.0
sata_svw 0000:01:00.0: delay 1 second.
ata1: SATA max UDMA/133 cmd 0xB0510000 ctl 0xB0510020 bmdma 0xB0510030 irq 42
ata2: SATA max UDMA/133 cmd 0xB0510100 ctl 0xB0510120 bmdma 0xB0510130 irq 42
scsi0 : sata_svw
JFFS2 notice: (22) check_node_data: wrong data CRC in data node at 0x067d6800: ead 0x21d87be5, calculated 0x4218b1a.
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl F0000)
scsi1 : sata_svw
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl F0000)
ata2.00: ATA-8, max UDMA/133, 976773168 sectors: LBA48 NCQ (depth 0/32)
ata2.00: configured for UDMA/133
Vendor: ATA Model: SAMSUNG HD502HJ Rev: 1AJ1
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: sda1
sd 1:0:0:0: Attached scsi disk sda
sd 1:0:0:0: Attached scsi generic sg0 type 0
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
NTFS driver 2.1.27 [Flags: R/W MODULE].
cdfs 2.6.18 loaded.
JFFS2 notice: (22) check_node_data: wrong data CRC in data node at 0x06dc1000: ead 0x98d98ca6, calculated 0x449971f1.
Any help is appreciated.