2 Motorised Dishes Setup

[tedmoo]

Hi there,

Can you please help with the configuration of my UNO.

I have 1 Motorised Dish for 28.2 (it's pretty much static though - can only receive 28.2) and another motorised dish to receive sat 0.8 - 19e (again limited to these sats - Bloody trees)

I've used a Diseqc switch on spiderbox to move between these easily. But not sure which setting to use on the UNO. If only the Diseqc A/B could have 'positioner' listed under port B?

Thanks Very Much




VIX image 2.4.213

Fantastic forum btw!

[Rob van der Does]

Use 'advanced' setup.
Create LNB 1 and assign it to 28.2: set DiSEqC mode to 1.2 and USALS to yes (if you use USALS) and 'Committed DiSEqC command' to AA.
Create LNB 2 and assign it to the other satellites: set DiSEqC mode to 1.2 and USALS to yes (if you use USALS) and 'Committed DiSEqC command' to BB.

[tedmoo]

Great Stuff thanks greatly! :thumbsup: