Telnet mistake

[GMTH63]

Hi

I accidently dropped my laptop while connected to the ET9000, and in trying to catch it sent something via DCC telnet, TV picture disappeared
immediately, dont know what went was sent via telnet.
The receiver now displays ET9X00 on display and will not respond to remote control or manual buttons, I have tried unplugging and re-flashing with various images, the receiver starts flash and then goes to booting but no further.

Any ideas on getting it running again would be appreciated.

thanks in advance

gmth63

[Flyingpig]

I am not as technical as the other guys on here, but have you tried from the beginning - by flashing the bootloader, and then the image on top of that?

I would guess that if it is trying to boot, you should be able to flash the new bootloader, then the new image should fly over the top. Give that a go, cant do any more harm, and could work - coz that is what I would do.....

FP.

[GMTH63]

Hi
Thanks for the reply, yes tried bootloader but receiver would not recognise it, tried various usb sticks formatted to fat32, but no luck.

thanks

[river-rat]

no image at all? via scart etc? whats it say when booting up?