View Full Version : [VU+ Duo] Build 181 will not install
Hi all,
I've tried the online update for 2.4 build 181 twice now but it will not install. It goes through the motions and reboots but when I check on the installed version I'm still at build 165.
Anyone else experiencing this?
TIA
Hi,
updated Ultimo yesterday without any problem.
You can try with telnet to see if there are errors which are not shown in the GUI.
Open Telnet, init 4, opkg update, opkg upgrade, reboot.
Error during update and upgrade would be an explanation.
ciao
Im getting the same problem as above ???:confused:
Dont worry andy has found the problem and is working on the fix now. we'll post up when the new image with the fix is online.
problem identified and being fixed asap
Rob van der Does
12-07-12, 16:07
Build 185 is online: could you try to update now please?
Just did a telnet update here on my ultimo and all seems to have gone fine, no errors etc.
be aware that not all images are uploaded yet. the uno, ultimo and solo images are currently online and the duo will be next ( in the next five to ten minutes ).
Rob van der Does
12-07-12, 16:12
Same here.
ok guys the Duo image 2.4-185 is now online with the fix, so you can update now if you need to, although the image is still set to unstable so backup first as always.
sorry guys mine is still not updating from 165 ???? (vu+duo vix 2.4)
Mr. Mister
12-07-12, 17:11
Telnet session on all Duo`s.. and all updated fine..
ill try again right now and update
Update worked this time THANKS to all....:):)
Update to build 185 through the menu with no issue. Thanks.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.