Bluto141
09-07-12, 00:28
Let me start in saying, I have been around the fringes of the old analogue days as well as D2box and various "other cable" type of fun.
I had a DM500 and a Technomate, so would hope I can at least find my way around this bloody box.
After many painful days and with the patience of Sicilian, this box would already be in the bin.
I eventually got it working with TeamRed, but stupidly decided to try an new image.
After trying to install, openmips, AAF and a couple of others it was suggested I go back to TeamRed as it was working..
That was over a week ago, I am at the stage as some others seam to be, not picking all the channels up and worse, My CCcam.cfg file won't work, I am putting it in the var/etc folder, but bothing unscrambles, I have tried CCam 2.3.0 and 2.2.1.
Am am seriously thinking about selling this and going back to the technomate..
Ok from the begining.
I format usb stick with the recommended utility and put on the 2 preflash files
Run preflash from usb
format and install the 3 files for TeamRead image on usb.
boot to files on usb, let it finish
Run the general set up, HDMI etc.
when I run manual I only get 490ish.
instal extra url
Install and run cccam 2.3
install cross epg and cool tv.
put cccam.cfg in var/etc using ftp.
That is what I have done and as far as I can remember, I did it in that order...I lost all my info a while back.
Cheers Gary
I had a DM500 and a Technomate, so would hope I can at least find my way around this bloody box.
After many painful days and with the patience of Sicilian, this box would already be in the bin.
I eventually got it working with TeamRed, but stupidly decided to try an new image.
After trying to install, openmips, AAF and a couple of others it was suggested I go back to TeamRed as it was working..
That was over a week ago, I am at the stage as some others seam to be, not picking all the channels up and worse, My CCcam.cfg file won't work, I am putting it in the var/etc folder, but bothing unscrambles, I have tried CCam 2.3.0 and 2.2.1.
Am am seriously thinking about selling this and going back to the technomate..
Ok from the begining.
I format usb stick with the recommended utility and put on the 2 preflash files
Run preflash from usb
format and install the 3 files for TeamRead image on usb.
boot to files on usb, let it finish
Run the general set up, HDMI etc.
when I run manual I only get 490ish.
instal extra url
Install and run cccam 2.3
install cross epg and cool tv.
put cccam.cfg in var/etc using ftp.
That is what I have done and as far as I can remember, I did it in that order...I lost all my info a while back.
Cheers Gary