View Full Version : new installation
Hi lads just got my vu+ solo box..Im trying to load an image. Usb stick formatted to FAT32 and image loaded..The Vu+ screen is on and loading enigma2 down the right hand corner of the screen..but its therea long time...any help will be really appreciated
Follow this guide to flash http://www.vuplus-support.co.uk/showthread.php?1148-How-to-flash-your-VU-Solo-with-USB-stick and use this image http://www.vuplus-support.co.uk/showthread.php?1205-VTi-quot-Vu-Solo-Team-Image-quot-V0.1-1.07.2010-USB-Drivers replacing the drivers once done.
ok I got passed that part now on doing the network test my IP Adress and Nameserver is coming up as unconfirmed sorry lads
Has your router got DHCP enabled?
yes it has as far as i know
have u enabled dhcp on the box itself. can it obtain the gateway and other settings
Have you tried typing the VU's ip address in the address bar of your web browser? see if it will connect that way
Ok lads I have managed to get the router connected ( nearly divorced ) anyway now when I go to load enigma 2 Bouquet through Dreamboxedit its coming up as unable to connect..I tried a null modem cable and enthernet between pc and box.
With Dreambox edit you only need to enter the ip for you Vu and then in user you put root and password leave blank.
On a local lan there is no reason not for it to connect other than you AV/ firewall blocking it.
basilyoung
27-08-10, 21:58
some ftp type progs dont like " " (blank) as a password
it might help if you telnet the unit, (ip of your unit, login = root password " " blank/nothing then type
passwd (not password) you will be prompted to type in a new password, do so, (no text will be seen)
then you will be prompted to repeat your new password, again type in the password (no text will be seen again)
once done...it will confirm the password has changes
baz
Ok I have the pc running off the router which is fine..I then have the vu+ box connected to the router ...all ok in network test except IP Address as uncomfirmed I press blue and confirm the detail but still it comes up as unconfirmed...Im really sorry about this lads.
basilyoung
27-08-10, 23:54
no problem tandaman
have you set the ip on the unit to dhcp??
baz
tandaman
when u click on menu>setup>system>network>adapter settings
what do u have there for
use interface
use dhcp
ok I have the interface and dhcp on all geen but still wont contect to vu+ through dreamboxedit
it should write to you your network details
do u have an ip, netmask, gateway and name server all these have numbers beside them
if so, what is your router u r using, is it forwarding the ftp port for any reason to another computer.
basilyoung
28-08-10, 00:07
this gets back to my post .....you need to telnet the unit, or use winSCP
baz
ah man think i might have bitten off more than i can chew...I have all the numbers next to ip gateway and so on...downloading winSCP now and will have a look and see if I can use it...really appreciate the help guys
basilyoung
28-08-10, 00:24
the reason you are having problems useing dream edit, is that it does not reconize a blank password
use the telnet instructions, then try, if you do not no how to use telnet, (many do not) please say so..and we can help you
baz
basilyoung
28-08-10, 00:30
one other question
why not just download via the unit, the latest settings...catseye settings are very very good??
baz
So many things I dont know....I have cateye bouquet in dreamboxedit but as I said cant connect....I think i know the telenet command but can you give it to me again please
if u mean to change the password then it is "passwd" without the ""
I downloaded winSCP tried that but that wont connect either...The box is all connected up to the router all green ticks in the test...When i go to download the plugins it says no plugins available...but anyway connecting the box is my main problem
can u have a look at thebox webinterface
does it have
start webinterface yes
enable http connection yes
port number is 00080
Dont know about the webinterface but I got the box connected in dreambox edit but now when I go to tranfer to the box it says connected but isnt actually doing anything
have u read the guide for dbedit and go as it says
Yes i did it step by step m8
Ok lads I have box connected to the network via belkin router 3600n version...Run the network all green ticks...My pc is connected to the same router via enthernet cable internet working fine...but the problem is my pc cant see that the vu+ solo box is on the network so i cant transfer any files to it via the pc...any help will be appreciated
You need to use telnet and give your box a password.
I suggest you download putty.
what happens if u wrote ur vu ip address in ur browser address bar and press enter
nothing happens....this page cannot be displayed....Just so im writing in the right on where do i find the box ip address...I will try putty thanks
make sure webinterface is enabled
to find vox ip address:
menu>setup>system> network: adapter settings
the box ip should be displayed there
ok working tonight will try it 1st thing in the morning...in network on the pc my pc and the router is in there to my understandin g the router shouldnt be in there should it
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.