problem with usb hard disk with image 2.4

[mietek]

I have problems with usb hard disk with image 2.4 only vu duo Disk not recognized
I do not know if this is a bug, please check and help. With image 2.3 everything works well
With Vu uno works well too

thanks and greetings

[satmanbasil]

Hi there

No problem here with usb hdd on both solo and duo working with the 2.4 image make sure you format the hdd on your pc then simply connect to the receiver and go menu - setup - vix - mount manager
you should see your usb drive listed simply mount it.

regards
satmanbasil

[pooface]

Can you telnet in to your box, and issue the command lsusb:


root@vuultimo:~# lsusb
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 13fe:3623 Kingston Technology Company Inc.
Bus 001 Device 002: ID 2013:024f
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

and on et9000:


root@et9x00:~# lsusb
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID dead:beef
Bus 002 Device 002: ID 1a40:0101 TERMINUS TECHNOLOGY INC.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 059b:0272 Iomega Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

On ultimo, the "Kingston Technology Company Inc." is a usb memory stick, and on the et9000, the "Iomega Corp." is a usb hdd. You should get something which should show your usb drive...

To get more detailed info, type "lsusb -v". Ultimo:


Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x13fe Kingston Technology Company Inc.
idProduct 0x3623
bcdDevice 1.00
iManufacturer 1 Verbatim
iProduct 2 STORE N GO
iSerial 3 07A5130769EBAC63
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 200mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk (Zip)
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)

Et9000:


Bus 001 Device 002: ID 059b:0272 Iomega Corp.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x059b Iomega Corp.
idProduct 0x0272
bcdDevice 2.40
iManufacturer 81 Iomega
iProduct 57 Iomega HDD USB2.0 Drive
iSerial 44 56780D189D51
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 39
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk (Zip)
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 10
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0001
Self Powered

[mietek]

HDD is formatted ext3 and mount automatically with image image2.3 , but image 2.4 works not. I have samsung HDD 750 GB external
The only problem with receiver VUduo.The receiver VUuno works ok.

[Maxwell]

does it show up in mount manager - menu>setup>vix>mount manager

[pooface]

HDD is formatted ext3 and mount automatically with image image2.3 , but image 2.4 works not. I have samsung HDD 750 GB external
The only problem with receiver VUduo.The receiver VUuno works ok.

And the results of what I posted above were?!