View Full Version : GiGaBlue HD800SE Bootloaders
Latest bootloader for GiGablue HD800SE.
This one is dated 04/04/12.
Please note that once updated to new bootloader you may not be able to use older images that used old bootloader.
Older bootloader dated 21-12-11 for older images.
This new bootloader has an activation period when flashing images. OK button must now be pressed to flash an image and burn.bat no longer required for images.
To flash bootloader: -
Copy both burn.bat and cfe.bin to root of USB stick
Power off receiver.
Connect USB stick to receiver and power on.
Wait a few second for the bootloader to flash and the receiver to reboot.
To flash new images.
Copy the gigablue folder from your chosen image to root of USB stick.
Power off receiver
Connect USB stick to front port and power on.
As soon as the display shows 'conf', press OK button behind front flap.
During flash the LED behind standby button witl start blinking purple and other text/numbers will appear on VFD.
Wait for the receiver to automatically reboot when complete.
bassethound
02-09-12, 12:37
New CFE for SE 31.08.2012 :
- removed imageversion
Make sure you use the right one for your box
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.