Need help to set tinners with DiseqC switches.

[sunlight786]

hello ,
I have flash via usb my VU+DUO with dream elite 1.3.3f usb image( i have also tried some other images well)
my set up is 1.2m fixed dish + 3 quad lnb,s and with 3 Diseqc Switches . and the set up is in switches are portA=28.2, port B=19.2e, and port C=13e
I choose 2 diseqc switches to feed my vu+duo and the set up is in box as
menu
set up
tuner configuration
simple
disquA/B/C/D
portA= 28.2
port B = 19.2E
portC =13e
portD = nothing connected
then bottom both choices are select to YES
AND the tunerB also same set up
After doing that i did a automatic scan and i found all the channels with out any problem

BUT soon i switch on and off the box or restart what i found in tunnel configuration as
simple
Disque A/B/C/D
portA=28.2
portB= NOTHING CONECTED
portC=NOTHING CONECTED
portD= NOTHING CONECTED

NOW if i try to select again the desire dish i wan by press left or right from remote all i can choose 28.2 and nothing selected

there is no other satellite to choose.

i did try to flash again but same result.

PLEASE HELP ME OUT AS I AM HAVING A BIG TIME WITH THIS BOX.
ALSO PLEASE CLEAR ME IF I AM USING THE RIGHT IMAGE.

if there is a diffrent set up for diseqc switch please write me in detail so i can follow

also a lot of time if i down load any thing as if i load some pre made bouqts in to my box via dreambox edite then i can find those bouqts but all the channels show like discoloured then only i can view them channels via by pressing all satellite not through bouqts.

[basilyoung]

set the tuner A to advanced
select 28.2 east
diseqc mode 1.1
committed Diseqc commammand set to AA
press ok (saves the settings)

then repeat the above, but set astra 19 east to AB

save

then repeat and select 13 east, save to BB

then set up tuner B as same as tuner A

baz

the greyed out channels/sats, are due to them not being enabled via your tuner config

[sunlight786]

ok i have found in tuner configration by selectin mode simple to advance i get as
configration made=advance
satellite=28.2
lnb =1
priority=auto
lof=universal lnb
voltage mode=polarization
increased voltage=no
tone mode=band
DISEqC mode=non

Now if I change the diseqC mode to =1.0 OR 1.1

THEN I HAVE THESE OPTION TO DEAL WITH

DISEQC mode=1.0 or 1.1
tonerburst=none
Committed DiSEqC command=none
fast DiSEqC=no
sequence repeat=no
command order=committed tonerburst

now from here can you please write me the exact settings? also there is no option to select another satellite like 19.2, 13e etc?

[basilyoung]

select 28.2 east
lnb 1
DISEQC mode=1.1
tonerburst=none
Committed DiSEqC command= AA
fast DiSEqC=no
sequence repeat=no
command order=committed tonerburst NOT SURE, BUT THINK NONE

press ok, to save

then select 19 east

lnb1

DISEQC mode=1.1
tonerburst=none
Committed DiSEqC command= AB
fast DiSEqC=no
sequence repeat=no
command order=committed tonerburst NOT SURE, BUT THINK NONE

press ok to save

select 13 east
lnb1
DISEQC mode=1.1
tonerburst=none
Committed DiSEqC command= BB
fast DiSEqC=no
sequence repeat=no
command order=committed tonerburst NOT SURE, BUT THINK NONE

I hav,nt messed with diseqc 1 or 1.1 for years, but think you set all lnb settings to one if this fails,...then 28 east = lnb 1 19 east = lnb 2 and so on

baz

[sunlight786]

ok let me try this what you recomend and i will come back to you.

[basilyoung]

please do.....there are others that can help as well, but i am not far off the mark

and also welcome to the forum

baz

[bob1]

It should work with simple as well ,for some reason its not saving your settings ,you need to press ok after changing the tuner settings if you just exit it won't save anything, its also worth rebooting after changing any settings.
Baz's advanced settings will also work as well, i have a single fixed dish with 3lnb's and have used those settings before.

[sunlight786]

ye thats exact happend with me even though i save them but soon i down load any thing or reboot the box then i can find any satellte apart of 28.2 and nothing selected.

[basilyoung]

so the unit resets, to a single saterlite, after a reboot??
what image are you using??
baz

[sunlight786]

set up
tuner configuration
simple
disquA/B/C/D
portA= 28.2
port B = 19.2E
portC =13e
portD = nothing connected
then bottom both choices are select to YES
AND the tunerB also same set up
After doing that i did a automatic scan and i found all the channels with out any problem

BUT soon i switch on and off the box or restart what i found in tunnel configuration as
simple
Disque A/B/C/D
portA=28.2
portB= NOTHING CONECTED
portC=NOTHING CONECTED
portD= NOTHING CONECTED


this is exact happend and so far i tried pli unstayable, dream elite 1.3.3f, dream elite 1.3.2 ,and VTI image,s well

[bob1]

After the reboot and loss of port B = 19.2E portC =13e ,reselect them save and reboot.

[sunlight786]

i can only select 28.2 and there is no other satellite left to choos it happend exact after i send sly uk v3.5 bouqets in to my box via dream edite.