sunlight786
24-08-10, 16:56
hello ,
I have flash via usb my VU+DUO with dream elite 1.3.3f usb image( i have also tried some other images well)
my set up is 1.2m fixed dish + 3 quad lnb,s and with 3 Diseqc Switches . and the set up is in switches are portA=28.2, port B=19.2e, and port C=13e
I choose 2 diseqc switches to feed my vu+duo and the set up is in box as
menu
set up
tuner configuration
simple
disquA/B/C/D
portA= 28.2
port B = 19.2E
portC =13e
portD = nothing connected
then bottom both choices are select to YES
AND the tunerB also same set up
After doing that i did a automatic scan and i found all the channels with out any problem
BUT soon i switch on and off the box or restart what i found in tunnel configuration as
simple
Disque A/B/C/D
portA=28.2
portB= NOTHING CONECTED
portC=NOTHING CONECTED
portD= NOTHING CONECTED
NOW if i try to select again the desire dish i wan by press left or right from remote all i can choose 28.2 and nothing selected
there is no other satellite to choose.
i did try to flash again but same result.
PLEASE HELP ME OUT AS I AM HAVING A BIG TIME WITH THIS BOX.
ALSO PLEASE CLEAR ME IF I AM USING THE RIGHT IMAGE.
if there is a diffrent set up for diseqc switch please write me in detail so i can follow
also a lot of time if i down load any thing as if i load some pre made bouqts in to my box via dreambox edite then i can find those bouqts but all the channels show like discoloured then only i can view them channels via by pressing all satellite not through bouqts.
I have flash via usb my VU+DUO with dream elite 1.3.3f usb image( i have also tried some other images well)
my set up is 1.2m fixed dish + 3 quad lnb,s and with 3 Diseqc Switches . and the set up is in switches are portA=28.2, port B=19.2e, and port C=13e
I choose 2 diseqc switches to feed my vu+duo and the set up is in box as
menu
set up
tuner configuration
simple
disquA/B/C/D
portA= 28.2
port B = 19.2E
portC =13e
portD = nothing connected
then bottom both choices are select to YES
AND the tunerB also same set up
After doing that i did a automatic scan and i found all the channels with out any problem
BUT soon i switch on and off the box or restart what i found in tunnel configuration as
simple
Disque A/B/C/D
portA=28.2
portB= NOTHING CONECTED
portC=NOTHING CONECTED
portD= NOTHING CONECTED
NOW if i try to select again the desire dish i wan by press left or right from remote all i can choose 28.2 and nothing selected
there is no other satellite to choose.
i did try to flash again but same result.
PLEASE HELP ME OUT AS I AM HAVING A BIG TIME WITH THIS BOX.
ALSO PLEASE CLEAR ME IF I AM USING THE RIGHT IMAGE.
if there is a diffrent set up for diseqc switch please write me in detail so i can follow
also a lot of time if i down load any thing as if i load some pre made bouqts in to my box via dreambox edite then i can find those bouqts but all the channels show like discoloured then only i can view them channels via by pressing all satellite not through bouqts.