Sky Living HD not displaying

[andyking35]

I have recently purchased and set up a Vu+ Duo. I've got it working with my Sky card with thanks to the help in these forums.

However, the only channel I cannot get to display is Sky Living HD. All the other HD channels are fine with my Sky card and Sky Living standard def channels work fine. I used SGTFlipFLops channel lists with DreamBoxEdit and got everything else to work fine. I can view the channel when the card is in my Sky HD box so cant understand why this one channel wont work.

Any ideas on this?

I have attached a screenshot of the channel data from DreamboxEdit.

[Larry-G]

works fine here foe me with SGTFlipFlop's latest bouquet pack.


http://en.kingofsat.net/find.php?question=sky+living+hd&Submit=Zap

[andyking35]

Which SGTFlipFLop pack did you use and could you provide a link to it pls to make sure I'm using the same one.

[Larry-G]

This one

http://www.world-of-satellite.com/showthread.php?2634-SGTFlipFlop-E2-settings&p=130948&viewfull=1#post130948

[andyking35]

That's great thx. I'll give that a try and report back.

[andyking35]

Have just tried it using dreambox edit and it hasnt solved the problem. There is a signal coming through but for whatever reason it doesn't display. Have tried it on both tuners with same result.

The channel transponder info has changed slightly though and i've uploaded another screenshot.

[Mr. Mister]

Why not try a set of Silverfox / Vix bouqets.. just to rule out the bouqets..

You will find the link for them in my Signature..

[andyking35]

Tried "VIX Silverfox0786, Mr. Mister E2 HD SKY UK [HD SWAP] [05.05.2012]" and it still doesn't display.

BTW, the above bouquets produced a lot of errors when opening in dreamboxedit and crashed my box first time.

[stumpey]

I have the same problem with sky arts 1 hd, all other channels no problem just this one which is very flaky.

Vu+ uno sgtflipflop


Steve


Sent from my GT-N7000 using Tapatalk 2

[zola25]

I am using catseyes latest settings and both living HD and Sky Arts HD1 open fine

[andyking35]

I still haven't been able to find a solution to this. Doesn't make sense as all other hd channels are fine and Living SD works fine also.

[GAH2402]

Hi,

Way don't you do a manual scan of 28.2? That would then definitely rule out any problem with someone elses bouquets? It would take approx 5 minutes for a manual scan, and if you still can't view the channel, then the problem is elsewhere.

GAH

[andyking35]

Hi,

Way don't you do a manual scan of 28.2? That would then definitely rule out any problem with someone elses bouquets? It would take approx 5 minutes for a manual scan, and if you still can't view the channel, then the problem is elsewhere.

GAH

Hi.

What settings do you recommend using when running the manual scan? It asks for frequency and so on.

[Larry-G]

Hi.

What settings do you recommend using when running the manual scan? It asks for frequency and so on.

follow the link i posted way back in the second post of this very thread for that information.

[andyking35]

Hi yes have already tried that to no avail as the settings of the channel are the same as in the link you sent.

Could people please compare their tuner settings to mine as this might be the issue. I have the following:
Config mode: simple
Mode: DiSEqC A?B
Port a: Astra 1N/2A/2B/2D/Eurobird 1 (28.2E)
Port b: not connected
Set voltage and 22khz: yes
send DiSEqC only on satellite change: no

[andyking35]

Also, in playing around and retuning I've not lost Sky 1 HD and sky atlantic HD! Help!

[andyking35]

The other issue could be my CcCam setup. I installed enigma2-plugin-cams-cccam.2.3.0_1.0_mipsel.ipk and copied the CCcam.cfg to /root/etc. My ccCam.cfg file only contains the following line to allow me to use my sky subscription card:

card reader /dev/sci0

[Larry-G]

you also need to have the corresponding boxkey for the card in your CCcam.cfg file in order for the card to clear the premium channels. ( although sky1 is not considered as premium i am not sure if sky1 HD is ).

[Stanman]

The other issue could be my CcCam setup. I installed enigma2-plugin-cams-cccam.2.3.0_1.0_mipsel.ipk and copied the CCcam.cfg to /root/etc. My ccCam.cfg file only contains the following line to allow me to use my sky subscription card:

card reader /dev/sci0

Can you go into the ccaminfo and see what is showing for entitlements, if the card is being read properly than you should have about 8+ entries.

Also file name needs to be CCcam.cfg

[andyking35]

Can you go into the ccaminfo and see what is showing for entitlements, if the card is being read properly than you should have about 8+ entries.

Also file name needs to be CCcam.cfg

Stanman, do you mean the /etc/enigma2/CCcam.channelinfo file? If so then there are a whole load of entries (about 700 in total and i've attached the file as a zip).

[judge]

Have a look at http:// IP OF BOX :16001/entitlements

[andyking35]

Have a look at http:// IP OF BOX :16001/entitlements

I get the following:
Entitlement info
003 24-06-2012
00b 24-06-2012
0010 24-06-2012
001d 24-06-2012
b765 17-06-2012
b766 17-06-2012
b772 17-06-2012
b773 17-06-2012
b846 24-06-2012
b860 24-06-2012
b8d2 24-06-2012
b968 24-06-2012

[andyking35]

you also need to have the corresponding boxkey for the card in your CCcam.cfg file in order for the card to clear the premium channels. ( although sky1 is not considered as premium i am not sure if sky1 HD is ).

You are indeed correct Phoenix! I grabbed the box serial number off sky box system info, converted it to hex and added the following line to my CCcam.cfg file (hex value changed for obvious reasons):

BOXKEY: /dev/sci0 A3 F3 81 77

Thanks to all of you for your help in which has been a learning curve for me as a linux and vu duo newbie but worth the effort :D. It is strange though that sky1 hd and sky atlantic worked initally.

However, all work now, even sky Living HD!

[Larry-G]

No worries I'm happy your now sorted.

Sent from my HTC Desire using Tapatalk 2