tuner problems

[bumsrus]

Can someone point me into the right direction for the tuner settings using black hole.

[TomD]

Hi Bumsrus

Your tuner configuration will need to be selected to match your set-up. i.e do you have a fixed dish, multiple lnb's or motorised system. Each option is explained in the manual which I have attached.

PS - It might be a good idea to detail your set-up and image preference in the signature bar, as it provides people with the right information to help.

Welcome to the Forum - Enjoy :thumbsup:

Tom

[bumsrus]

HI Tomd, I have a motorised dish with twin lnb, hope this helps.

[basilyoung]

the coax connected to the motor, needs to be setup to
simple, ( tuner A or B )
positioner
input your settings ie, 53.000 north, 002.000 west ( you need you geo address ) to get these settings if you do not no them, google sat pointer
the tuner thats connected directly to the lnb needs to be set to equal to which ever tuner controls the motor, so if A controls the motor, then tuner B needs to be equal to tuner A

[bumsrus]

so far i have tried tuner a;
positioner
input my settings ie, 53.000 north, 002.000 west
tuner B: set to equal to tuner A-
also tried vice versa but scan never goes past 0% and gets stuck on 8.0w alantic bird 2

i have tried a simple search on single
28.2 eurobird
diseqc - no

and this picks up all channels expected

any advice on where im going wrong?

[Larry-G]

set tuner b to second cable from a motorized dish.

[bumsrus]

set tuner b to second cable from a motorized dish.

iv tried

tuner A: - second cable of motorized lnb tuner B
Tuner B -positioner

no joy still no channels

swapped tuners so

tuner A: positioner
Tuner B: second cable of motorized lnb tuner A

still no joy