PDA

View Full Version : TM-Twin-OE Bootloader recovery



bassethound
13-04-12, 16:08
TM-Twin-OE Bootloader recovery

For normal problems, a reflash should fix problems. However, there may be an occasion where the bootloader is corrupted. Attached below is the 07/03/2012 bootloader recovery for the Tm-Twin-OE. A null modem cable and serial port is required. I have not tried with a USB converter. With this version you are prompted to press OK to install an image. If you have a previous bootloader which does not prompt before flashing an image, I assume you are an early tester and will have access to the 10/03/12 image which has the bootloader update built in.

The instructions should be easy enough to follow. The only thing I would add is that in section 2.1, after your click com start, the execution log will display some text and end with CFE. If you do not get to CFE, there is a problem and you cannot use this procedure. Ring TM directly. For the moment you will have to get a replacement/repair done at the HQ.

Please do not mess around with the bootloader unless absolutely necessary.

thanks to abu-baniaz