PDA

View Full Version : Channels won't clear on boot or after going into menu settings problem



lumberjack
29-03-12, 22:29
Hello.

Have been given an 800hd to try and playing with it has sprung some problems as follows.

Yesterday a channel would scramble after about 8 seconds and them come back on again 8 seconds later.
This went on continuously for about 30 minutes regular as a clock. (I left it on that long to check fully)

Today I have noted that it stayed on for a few minutes without scrambling so I went into setting and started
deleting some foreign stuff that had been left on from shop owner.

On coming out of the menu it would not clear.

Going in to supersetting and pressing test it connected and cleared.

I went into menu and deleted a few channels again then back out showed scrambled again.

So I went into supersetting and pressed test and it connected and cleared etc etc.

I have just now switched the box off and back on and it scrambled, needing me to do a
yet another test connection on supersetting.

Weird but consistent.

Firmware on the box is.

dvbs_evb_Vo3
S/W R4750
F/w 1.0.16777216-5379215
Jan 11 2012

Hope someone can help

thanks

ps this says it's my first post yet I have introduced my self an hour ago in the correct section.

basilyoung
29-03-12, 22:38
what this post is about, is cardshare I think, and you need to read the rules of the forum, no one here will be allowed to assist you, your best bet, is ask the guy that sold you the setup, but please do not ask for CS help

lumberjack
29-03-12, 22:41
As this question is about the firmware doing silly things I thought it would be ok to ask.

I apologise fully.


what this post is about, is cardshare I think, and you need to read the rules of the forum, no one here will be allowed to assist you, your best bet, is ask the guy that sold you the setup, but please do not ask for CS help

basilyoung
29-03-12, 22:45
is the unit ok on free to air channels??

lumberjack
29-03-12, 23:59
Yes it is fine on fta

It is also now doing what it was doing yesterday when I first got it.

On for about 10 seconds, scrambled for 5 seconds, on for 10 seconds, scrambled for 5 seconds
over and over again in a constant loop.

Box is going back to dealer, will have to try s10 instead

thanks for feedback


is the unit ok on free to air channels??