White card premium channels?

[ttt1892]

I subscribe to Sly world(everything)package. I`ve been using this card in my VU+ duo without any problems.Now the card won`t open the sports/movies and the 3D channel. I have the box key in my cccam cfg.I did notice something strange,when I use the box key generator it gives me a different box key to what it did a few weeks ago.I`ve also tried this box key,but I get the same results,entertainment channels like sky one,but no movies or sport.Does anyone know what the problem could be? Have sky found a way to limit cs?

ttt.

[canthackit]

No mate
wrong boxkey
regards: canthackit

[ttt1892]

But this boxkey has been working.All my entitlements show in cccam info.

ttt.

[basilyoung]

if you upgraded to 3D (u lucky g*t) its likely your box key has changed, put it back from whence it came,...and once your channels kick in...recheck the required info

[ttt1892]

I`ve put the card back in the sly box.All channels are clearing including the 3D channel,I`ve checked the card number,created the same boxkey.Put it back in VU+,and the premium channels still won`t clear,but all the entitlements show in cccam info.This is now doing my head in.

ttt.

[basilyoung]

restarted the cam??

box key: xx xx xx ?

baz

[ttt1892]

Yeah restarted everything. I believe sky have done something.

ttt.

[basilyoung]

no, its a problem at your end

I know of others that use there cards on the VU,

baz

[ttt1892]

That maybe the case,but I`ve been using my card on the Vu since I got it. I`ve tried everything I know,it`s just not happening for me now.

ttt.

[Stanman]

Are you putting it in the right slot?

[ttt1892]

Doesn`t matter which slot,it worked in both,but I only ever used the top slot.

ttt.

[Stanman]

It does??
You have to specify the slot location for the box key in cfg file. ie BOXKEY: /dev/sci0 XX XX XX XX

[ttt1892]

As I said I only ever used the top slot,it`s always worked,it still shows my full entitlements with the new dates.But it won`t clear the premium channels.

ttt.

[Stanman]

May well be teaching you to suck eggs but when I first started using my white card all non premium channels cleared but the premium would only clear once I had put a line in the cccam.cfg BOXKEY: /dev/sci0 XX XX XX XX

[grtmoby]

cccam has to be started on its own, have u done this.

[canthackit]

As I said I only ever used the top slot,it`s always worked,it still shows my full entitlements with the new dates.But it won`t clear the premium channels.

ttt.

i know you know mate, but you've got to recheck all the advice that's being offered.
the ntits will show as updated but that dosn't mean that the boxkey is correct, and again as suggested the path for the card slot should be entered as stanman say's, and if your card is in the top slot just try in the bottom slot (Oooo sounds painfull)

the fault lies therein either one or both are wrong.

regards: canthackit

[DrProzac]

What version of CCcam are you using?

And how long are you leaving on the channels for them to clear?
Is it just the Premium channels that are not clearing or all of them?

I still don't understand why you BOX KEY would change?
Have you had your Sky Card paired with a different reciever?

And do you know what your old BOX KEY was and have you tried that.
Also when you look at your entitlements what does it say is the slot it's using, and have you checked your cccam.cfg to make sure the box key is associated with that

card reader /dev/sci0
BOXKEY: /dev/sci0 XX XX XX XX
or
card reader /dev/sci1
BOXKEY: /dev/sci1 XX XX XX XX

[ttt1892]

Everything that has been said here has been done.The card slot is correct,the entertainment channels clear,the premium channels don`t.The box key is correct,I did make a mistake earlier generating the key,it hasn`t changed.I`m at a total loss to why this is happening.
Thanx for all the help guys,it`s really appreciated.

Thankyou.
ttt.

[ttt1892]

"Have you had your Sky Card paired with a different reciever?"

Yes I have, I`ve checked the box serial number and the card serial number and I still get the same boxkey.

ttt.

[ttt1892]

I`ve now tried the old boxkey,I`m getting the same results, clearing the entertainment channels not clearing the premium channels.

ttt.

[OldSkulRide]

have you tried oscam + cccam?

[DrProzac]

What version of CCcam are you using?
And have you tried to uninstall CCCam and re-install.

How many lines do you have in your cfg file?
Are you using CCCam Switcher?

All i have in my cccam.cfg is just the boxkey line and nothing more, and that's working fine.

[ttt1892]

Cccam 2.1.4. I have 27 c & flines. I`m not using switcher,what is that? I`ve not tried oscam + ccam.

ttt.

[Sicilian]

Cccam 2.1.4. I have 27 c & flines.

ttt.

Clear all C & F lines off your CCcam.cfg then try your channels again after a reboot.

Regards the boxkey I dont honestly believe its changed. Stick with what worked before. Just remove all F & C lines to test your card.

[DrProzac]

As SIC Says just start with a BASIC Config.
Test from there and see what happens.

[OldSkulRide]

oscam settings-

[global]
nice = -1
WaitForCards = 1
# logging

pidfile = /emu/oscam/oscam.pid
logfile = /emu/log/oscam.log
usrfile = /emu/log/oscamuser.log


[monitor]
port = 988
aulow = 120
monlevel = 0
[newcamd]
key = 0102030405060708091011121314
port = 40000@0963:000000



[account]
user = temp
pwd = temp
group = 1
uniq = 0
caid = 0963
ident = 0963:000000
AU = skyuk
monlevel = 0


[reader]
Label = skyuk
Protocol = Internal
Detect = CD
Device = /dev/sci0
mhz = 357
EMMCache = 1,3,2
Group = 1
CAID = 0963
BoxID = xxxxxxxx

This is N line you need to pust in cccam.cfg: N: 127.0.0.1 40000 temp temp 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

Try it, especially if nothing else works.

This config is for internal reader.

[ttt1892]

Ok, I`ve done a clean install of cccam 2.1.4. I haven`t changed anything,just started it after a reboot of the VU. Entertainment channels clear premium channels don`t.I`ve also put in the boxkey,rebooted the Vu and started the cam,still the same results.

ttt

[ttt1892]

Will all my peers still see my card if I use oscam?

ttt.

[grtmoby]

for some reason i have almost a close case:

all jsc clears out except the HD channel i even contacted the customer service and they said, never seen such a case (all channels clearing except one)
and so i am without the HD now and who knows till when :(

[OldSkulRide]

Will all my peers still see my card if I use oscam?

ttt.

Yes! But you need to put 256 at the end of N line. I already posted such N line (with 256 at the end).
And you need to use cccam 2.1.3 or lower .
2.1.4 version doesnt support this trick.

[ttt1892]

I know I`m being thick here,but where do those oscam settings go?

ttt.

[OldSkulRide]

You need to download oscam from server. I hope you dont use openpli because it doesnt have oscam on server and its abit difficult to install.
You should put three files into /var/tuxbox/config (i think).
Here they are...

[ttt1892]

Ok I`ve done the oscam and cccam,same results,no premium

[grtmoby]

ttt which image r uu using, is it one with the latest drivers. i am usinf aaf latest with oe 1.6 here and was thinking may be this is the cause of your problem and mine as well.

[ttt1892]

You could be right there g. I`m using dream-elite 133f.

ttt.

[grtmoby]

have u just updated it or it was working before
my problem is with DE 133F and tried AAF as i said earlier and still having the problem

if only i can find a way to backup the AAF image, i would go back to earlier versions of DE and see what will happen

[ttt1892]

No, I didn`t do anything to my VU+, I only noticed yesterday that my card wasn`t clearing the premium channels.

ttt.

[grtmoby]

and before yesterday, was it working with no issues

[ttt1892]

As far as I know. As I say I only noticed it yesterday,it`s been in the VU and the sly box since I upgraded the package a couple of weeks ago.

ttt.

[ttt1892]

I now have the premium channels working again in the VU,thanx to basilyoung. He told me to create the boxkey using the 17 digit number on the underside of my sly reciever.All is well again.Thankyou to all who gave advice especially Baz for the solution.

ttt.

[Sicilian]

Glad your sorted ttt1892 and thanks to my Baz :)

I wanted to say early on in this thread your boxkey is tied to the serial number of your receiver and will not be changed when upgrading packages, but then reading through I started to think I might be wrong.

[basilyoung]

obviously its not an issue here, the reason I dealt with this issue privately was so not to break any rules/security

but now ttt can enjoy his 3D tv, and well done for not stressing out ttt

baz

[grtmoby]

congrats m8

wish luck for me now :D

[ttt1892]

Yeah,hope you can get sorted.

ttt.