Random OSCam crashes

[Sandman]

I moved to VIX because I was getting a lot of crashes in OSCam and now they're starting to creep into VIX all be it in a very different way!

I have Sky UK and JSC cards and OSCam requires a restart once a day or more...

my logs when it happens -



2012/03/07 21:03:09 769028B0 c test3 (0500&042400/0A90/52:1BD2): found (222 ms) by jsc
2012/03/07 21:03:13 5ADB38 r ERROR in IO_Serial_Read (errno=0 Success)
2012/03/07 21:03:14 7690A4A0 c WARNING: invalid client tcp_conn_close()
2012/03/07 21:03:14 7690A4A0 c test1 disconnected from 127.0.0.1
2012/03/07 21:03:14 7690A4A0 c thread 76B534B0 ended!
2012/03/07 21:03:14 769040F0 c client connected to 10000 port
2012/03/07 21:03:14 769040F0 c encrypted newcamd:10000-client 127.0.0.1 granted (test1, au=on (1 reader))
2012/03/07 21:03:14 769040F0 c user test1 authenticated successfully (CCcam)
2012/03/07 21:03:14 769040F0 c AU enabled for user test1 on reader skyuk
2012/03/07 21:03:16 5ADB38 r ERROR in IO_Serial_Read (errno=0 Success)
2012/03/07 21:03:16 5ADB38 r [videoguard2-reader] classD0 ins40: (-2) status not ok 00 00
2012/03/07 21:03:20 5ADB38 r ERROR in IO_Serial_Read (errno=0 Success)
2012/03/07 21:03:22 769040F0 c test1 (0963&000000/0EE8/6A:07B4): timeout (5000 ms)
2012/03/07 21:03:23 5ADB38 r ERROR in IO_Serial_Read (errno=0 Success)
2012/03/07 21:03:23 5ADB38 r [videoguard2-reader] classD0 ins40: (-2) status not ok 00 00
2012/03/07 21:03:24 76905930 c client connected to 10000 port
2012/03/07 21:03:24 76905930 c encrypted newcamd:10000-client 127.0.0.1 granted (test1, au=on (1 reader))
2012/03/07 21:03:24 76905930 c user test1 authenticated successfully (CCcam)
2012/03/07 21:03:24 76905930 c AU enabled for user test1 on reader skyuk
2012/03/07 21:03:30 769028B0 c test3 (0500&042400/20F9/52:0811): found (231 ms) by jsc
2012/03/07 21:03:30 769028B0 c test3 (0500&042400/20F8/52:398C): found (222 ms) by jsc
2012/03/07 21:03:37 5ADB38 r ERROR in IO_Serial_Read (errno=0 Success)
2012/03/07 21:03:39 76905930 c test1 (0963&000000/10CF/62:39A0): timeout (5001 ms)
2012/03/07 21:03:40 5ADB38 r ERROR in IO_Serial_Read (errno=0 Success)
2012/03/07 21:03:40 5ADB38 r [videoguard2-reader] classD0 ins40: (-2) status not ok 00 00
2012/03/07 21:03:41 769028B0 c test3 (0500&042400/0A90/52:8163): found (222 ms) by jsc
2012/03/07 21:03:42 769040F0 c client connected to 10000 port
2012/03/07 21:03:42 769040F0 c encrypted newcamd:10000-client 127.0.0.1 granted (test1, au=on (1 reader))
2012/03/07 21:03:42 769040F0 c user test1 authenticated successfully (CCcam)
2012/03/07 21:03:42 769040F0 c AU enabled for user test1 on reader skyuk


(test 1 is the local box and test 3 is my downstairs box)

With BH I had to restart both OSCam & CCcam, sometimes a full reboot was required and a lot of the time I couldn't even restart OSCam from the web interface,

With the VIX cams I can simply restart OSCam from the web interface so one of the many restart scripts around may work but I'd rather identify the issue than keep manually fixing it...

Any ideas? I've had these issues from day 1 with my Duo and now my Ultimo...my configs are really bog standard!

[jcm193]

Hi sandman try Oscam 6450,this is what I've done and touch wood I hae no problems at all with my sky card.

[Sandman]

Hi sandman try Oscam 6450,this is what I've done and touch wood I hae no problems at all with my sky card.

I'm on 6408 at the minute but always keep up to date when I see a OSCam/CCcam213 release! I'll give that a go anyway :)