PDA

View Full Version : How to get 7day EPG on TM-5302 HD and TM-5402 HD



Sicilian
04-03-12, 07:23
Taken from here
http://download.for-better.biz/bbs/reply.php?board=tm5402hd&num=7

Works with TM-5402 HD and TM-5302 HD using Phantom patch from 23/02/12 onwards.


7 day epg on astra 28.2 east this might be useful
6000+7000 super series +5402
in 28 east scan tp, 11.777 v 27.500 any TV channel on this transponder, will load the 7-epg on your stb ,go into epg mode on one of those channels and within a minute the epg will populate on almost all channels.(leave for a few minutes to get full)
for a fast 12 hr epg .scan. trp.11.469 h 27.500
go on any channel on this transponder go into epg mode and within 20seconds you will have 12 hrs epg on almost all channels.
You can rename one channel "7-epg" and the other "fast-epg"
so no need to go into your radio channels
If above is not working
Start bellow
1/Download new software do factory reset
2/ Scan 11777 27500 V in 28 east
3/ Rename a channel and add to to Favorites Rename it Epg
4/ In "epg mode" select channel "EPG" from list and view/listen - Sky propaganda etc
6/ Return to "epg mode" and watch programmed guide being refreshed.
7/ select in turn BBC1 HD, BBC HD, ITV1 HD, and Channel4 HD - all channels show good signal/quality strength 95%/83% but "No Audio/Video"
8/ Select in turn BBC2, ITV1+1 etc - all these non-HD channels show normally.
9/ Place your receiver into Standby
10/ Reboot
11/ All HD channels show correctly but ............... no 7 day EPG
12/ "Normal" EPG can be refreshed by selecting each channel in turn

keith555
06-03-12, 14:26
Taken from here
http://download.for-better.biz/bbs/reply.php?board=tm5402hd&num=7[SIZE=2]

Works with TM-5402 HD and TM-5302 HD using Phantom patch from 23/02/12 onwards.

done this but egp is still lost when u go into standby mode

scousetomo
01-11-12, 10:44
hi can someone help me with this please when i scan for a fast 12 hr epg .scan. trp.11.469 h 27.500 none of the channels i scan on there are all nos and no channels i can get the now and next programs thanks

thijs
16-12-12, 19:02
fast scan channel does not work anymore