View Full Version : How to Install CCcam/MGCamd/Others on Duo/Solo/Uno/ET9000/ET5000/ET6000 ViX
How to Install CCcam/MGCamd/Others on Duo/Solo/Uno/ET9000/ET5000
In this example im going to show how to Install CCcam 2.2.1 on the ViX Image
You need access to FTP and CCcam 2.2.1 (or whichever version you prefer) ipk file and your CCcam.cfg file (your details go in here)
I use FlashFXP (Filezilla is a great free one too) and below is how I have configured mine, you will need to do the same for yours
You need your boxs IP Address/Host Name, Username and Pass in order to connect to your box
8393
As you can see my IP Address/Host Name is xxxxx.dyndns.org or i could have entered 192.168.x.12
my username is root (that is default)
my password is xxxxxxxxx (default password is blank or password or dreambox)
once you have saved and connected to the box you should get access to the root of your box and should look like the right hand window of the below screenshot
8394
Download your Cam from
http://www.4shared.com/dir/wnyHV50A/VIX_CAMS.html
Im after CCcam 2.2.1 which is enigma2-plugin-cams-cccam.2.2.1_1.0-r0_mipsel
Once downloaded you need to transfer the enigma2-plugin-cams-cccam.2.2.1_1.0-r0_mipsel.ipk file into the /tmp folder on the box like below
8397
Then transfer your CCcam.cfg file into the /etc/ folder
8396
now go to your box and press Menu/Setup/System/VIX/Install Local Extension and you should have enigma2-plugin-cams-cccam.2.2.1_1.0-r0_mipsel.ipk file in there
15323
Press "Green" button to install and once completed it will ask for a "Gui Restart". Press OK and wait for box to come back on
Once the box is on press Menu/Setup/Softcam / CI/Softcam Manager and in there if you have done everything correctly you should see CCcam 2.2.1
15324
Press "Green" to start CCcam 2.2.1 and it should now be active like below
15325
Finally Press "Blue" to enable Auto Start and you are now ready and setup with CCcam 2.2.1
15326
Hope you guys find this tutorial helpful any questions dont hesitate to ask in here
bassethound
28-05-11, 14:12
Great tutorial punisher im going to make this a sticky :thumbsup:
no probz guys thought it might come handy for people
notanotherone
29-05-11, 19:04
no probz guys thought it might come handy for people
why did you look at me when you wrote this :roflmao:
nice post mate much appreciated i can assure you
lmao no lookin in any directions :p just pointin ^^^^^^^^
gothicpsyko
30-05-11, 07:15
Hi folks!
Im noob and had a dvb 500 before where i used mgcamd 1.35a
For my needs i have to get this cam work. now i use the newest ccam 2.2.1 and yes it works! but not god enough for my needs!
i have installed mgcamd 1.35a downloaded from4shared!
First i had it installed and almost every location i put my newcamd.list, newcamd.cfg, mgcam.list, mgcam.cfg"i tryed many names" it will not start and say i had to put my config in var/keys
At least i found some other files the mgcam needs, havent found it here in the forum. files like the mg_cfg.fil and some others! now im so long that the mgcam will start! but now a new error is showing up!
Cannot parse the emu.
i use the newst vix image.
i there anyone who use a mgcamd 1.35a and can give me an step by step tutorial what to install, where to place which files, what the files should be named and so on! i have tryed for days and cannot get it to work!
im a noob, on my dvb 500 i had to install the mgcamd and then just too place my newcamd list file ! why is this so complicated on my vu+ duo
Thx for help allready jet!
Binary /usr/softcams
/etc/keys/ mg_cfg and newcamd.list
gothicpsyko
30-05-11, 09:05
ok i will try that
what are the binary files ?
mg_cfg i have nad newcamd.list i have
binary files are the .bin files.
if you installed the cam from the 4shared ipk files you should not need to worry about that as it should already be in the correct place.
Sorry i forgot to mention about mgcamd .... the cam is installed the same way as above but the config files mg_cfg and newcamd.list go into /var/keys/
complete noob question, where do i get cccam.cfg file from?
Create 1 using notepad and save it as CCcam.cfg not CCcam.cfg.txt make sure the extension is .cfg
Thanks, I am completely new to Linux and was setting up an et9000 for a customer, all went fine and straight forward.
Suppose I should say hi as well. Lol.
Glad u sorted mate and welcome to the forum :p
joerogangolf
31-05-11, 22:25
hi there again, been getting better at this, had a few problems over the past few weeks, but am getting there thanks to you guys. great post easy explained instructions. but keep getting this message (no config files found please setup cccam first in/etc/cccam.cfg) for a breif period it shows it is running but just stops showing in the softcam seetup active banner. am doing every thing you say to the letter. when it is active no channels open though. entered my cline in notepad as it should be on one line,as it should be and saved as save as, and changed drop down box to all files.
Do you have to keep activating it via the softcam manager? Also do you have to keep placing a copy of CCcam.cfg in /etc/ everytime it turns off?
hi there again, been getting better at this, had a few problems over the past few weeks, but am getting there thanks to you guys. great post easy explained instructions. but keep getting this message (no config files found please setup cccam first in/etc/cccam.cfg) for a breif period it shows it is running but just stops showing in the softcam seetup active banner. am doing every thing you say to the letter. when it is active no channels open though. entered my cline in notepad as it should be on one line,as it should be and saved as save as, and changed drop down box to all files.
A c Line in the CCcam.cfg suggests card sharing and that is a no no here
FYI use crimson editor for making the files as its unix compatible
what a shame that in 2.2 this doesn´t seem to work.. I have tried it several times and end up with no cams to select :(
what a shame that in 2.2 this doesn´t seem to work.. I have tried it several times and end up with no cams to select :(
This tutorial was done in vix 2.2. did you get the cam file show up in the IPK installer?
yes, from there the install, ok when asked and nothing in the end. Mgcamd did it in one time. And the cccam came also from the website stated here.
EDIT: After the mgcamd file the install of cccam also worked. Beats me.
Which version of cccam did u try?
Strange that. Try downloadin one of the other versions see if that shows up or not after install
CCcam 2.2.1 works perfectly with VIX 2.2 i am using it now.
superduperstriker
11-06-11, 23:24
Silly question but
whats the difference between enigma2-plugin-cams-cccam.2.2.1_1.0-r0_mipsel and enigma2-plugin-cams-cccam.2.2.1.1_0-r0_mipsel?
Im not too sure but i use enigma2-plugin-cams-cccam.2.2.1_1.0-r0_mipsel
It doesnt make any difference, and don't know why there are two. I have used both and it worked fine.
Hi,
Can you tell what version of mgcamd to installed with the VIX image please...regards.
bassethound
12-06-11, 22:24
Use this one enigma2-plugin-cams-mgcamd.1.35a_1.0-r3_mipsel.ipk from the link in post below
http://www.world-of-satellite.com/showthread.php?5921-Cams-for-ViX-Team-images
I today did another Vu of a neighbour and there the same problem with the cccam 2.2.1 file that is on the server: it installs but does not turn up in the softcam section. First I had to install again another cam but then still no 2.2.1, he now has 2.1.4 because that one did turn up. I find it all kind of strange.
im so suprised this is happening as loads of use cccam 2.2.1 file from the link in this post over and over again, I must have used it about 20 times lol and has never failed me once. I use Firefox 5 as my browser and flashfxp as my ftp and has never failed me once
I don't understand it either, but it does.
For the fun of it (sick :)) I will install VIX all over again om ny Vu, with the cccam as first to install afterwards.
try another browser, maybe the ipk is gettin corrupt during download ... i know its a long shot but i guess there not much else you can try but give it a go, use a different browser, download the file and transfer and install again see if that makes any difference
Does anyone else have the same problem as me with Mgcamd not restarting after standby? I also after restart it if I watch a FTA channel for a long period of time and then switch to a paid channel. It's doing my head in CCCam works fine but this Mgcamd doesn't.
I'm using Mgcamd 1.35a and is working fine apart from the restart issue...can anyone help?
Thanks
The solution is here: http://www.world-of-satellite.com/showthread.php?7858-mgcamd-autostart-does-not-work.
Thanks......
Use this one enigma2-plugin-cams-mgcamd.1.35a_1.0-r3_mipsel.ipk from the link in post below
http://www.world-of-satellite.com/showthread.php?5921-Cams-for-ViX-Team-images
I am totally new to all this, but have been forced to reinstall VIX on my ET9000.
The setup use MGcamd and I have updated the image to 2.2 and successfully innstalled enigma2-plugin-cams-mgcamd.1.35a_1.0-r3_mipsel.ipk
I am also using my old newcamd.list in the right folder.
The problem is that I don't have a MG_cfg file to use!
Please advise how to get one, either where to download it or make one.
If I need to make one, I would be glad for an easy step-by-step guide:)
Ok just loaded latest VIX image and now trying to load CCcam.
Problem being when i open DCC i don't seem to have a /tmp folder?
How do i get around this please?
With DCC right click and add a new folder and name it tmp, its that easy
With DCC right click and add a new folder and name it tmp, its that easy
Donnie just as i thought, but it just doesn't appear there. even tried making a folder tmp on desktop
and FTP it.
Get cant create dictonary tmp.
This is now doing me head in.
Thanks for reply mate
Try using a different ftp prog, I use winscp which you can find for free.
It will show any hidden directories.
Think im getting somewhere lol
Got there in end, had a folder in there that wouldn't let me add tmp
folder, deleted it and then it was fine.
All up and running now thanks
The tmp folder is a symlink to /var/volatile/tmp ;)
Sent with Tapatalk
That was the one mate.
The tmp folder is a symlink to /var/volatile/tmp ;)
Sent with Tapatalk
The VIX submenu doesn't have the option to install .ipk.
I am running VU+ Uno with the latest image; could there be something wrong or is this function disabled in the latest image?
The VIX submenu doesn't have the option to install .ipk.
I am running VU+ Uno with the latest image; could there be something wrong or is this function disabled in the latest image?
Yes it does, its blue button>VIX>install local extension. The IPK needs to be put into the tmp folder first
Hi all
I really need help URGENTLY !!!...
I am using Oscam 2.10 (stable version) and had it installed with by putting in the Oscam_1.00.4863 IPK and than replace/rename; that is working fine BUT... I now need to Edit the oscam.sh-file which normally is located in the usr/script-folder, but there is ... nothing there !!!
PLEASE help me just by indicating me the correct folder ???
Thanks a lot !:confused:
silverfox0786
17-08-11, 20:45
what script you on about if /usr/share is not avasilable then there is no script available either
hobartpaving
18-08-11, 15:00
I've had my Duo since January and always looked at this CCcam business as way too complicated so
accepted the limitations of my Sly HD box.
When I saw this I thought I'd finally read up and give it a go. Took me about 20 minutes and I can now
actually use the Duo for what I bought it for. I can't smile wide enough at the moment.
Many thanks for this info :thumbsup:
glad u found it useful :p once you use it you really do get the hang of things, its just a matter of trying it and trying it and trying it till u nail it :p
hi, I have just had v+uno from w-of-sat...having problem after creating CCcam.cfg from empty notepad should it have some code ? then transferred to etc folder using FZila but transfer failed...
softcam setup is active select ..c2.2.21 but there is no autostart after clicking green button...
hi, I have just had v+uno from w-of-sat...having problem after creating CCcam.cfg from empty notepad should it have some code ? then transferred to etc folder using FZila but transfer failed...
softcam setup is active select ..c2.2.21 but there is no autostart after clicking green button...
Did you reboot the box after installing the CCcam, had a similar issue this afternoon and had to reboot box twice and I could autostart the cam afterwards.
yeah done it plenty of times, after sending the cccam.config file to etc folder via FileZila it shows Error:Connection timed out
Error: File transfer failed...
Where did you get the the CCcam IPK file from?
I have followed the steps on page 1 of this thread
yeah done it plenty of times, after sending the cccam.config file to etc folder via FileZila it shows Error:Connection timed out
Error: File transfer failed...
That sounds like an error with filezilla so need to check your username etc to make sure its correct.
As for CCcam, if there is no config file it will not start up or autostart. Need to sort out FTP of the CFG file and than test autostart.
That sounds like an error with filezilla so need to check your username etc to make sure its correct.
As for CCcam, if there is no config file it will not start up or autostart. Need to sort out FTP of the CFG file and than test autostart.
the user name is fine because I have managed to FTP cccam file to v+uno but I am having trouble with CFG file only..
I have created CFG file from notepad. Do I need to write something on CFG File... I have no clue on this mate...
Yeh ur config file contains ur configuration in order to view channels. Thats as far as we go on that topic as its against the rules. Do a google search and ull find all the info u need on CCcam.cfg
the user name is fine because I have managed to FTP cccam file to v+uno but I am having trouble with CFG file only..
I have created CFG file from notepad. Do I need to write something on CFG File... I have no clue on this mate...
Try creating it wiht notepad+++ rather than notepad.
ahmed tabit
17-09-11, 11:28
many thanks mate very clear
The solution is here: http://www.world-of-satellite.com/showthread.php?7858-mgcamd-autostart-does-not-work.
This works for coming out of standby and after a full restart but if you restart the GUI it fails :(
Does anyone know where the cam startup script is located on the ET5000/ET9000?
what script you on about if /usr/share is not avasilable then there is no script available either
I think he's on about something like this:
How to - Oscam + Mgcamd1.35a start/stop cam script . Enigma 2
How to - Oscam + Mgcamd1.35a start/stop cam script . Enigma 2
This is a simple script for those enigma 2 images without cam + cardserver options in the softcam menu from blue button. You can still start/stop etc from blue button by simply modifying your existing script on your receiver. The scripts in enigma 2 on most images are in /usr/camscript. You can simply use your favourite editor to amend the scripts already contained on the box.
This script will start oscam first and then add a 15 second delay until starting mgcamd which allows oscam to take control of the internal readers.
The other benefit is that it enables you to install your own compiled oscam for your sat receiver and you dont have to rely on addon panels etc which contain old or buggy oscam versions.
#!/bin/sh
remove_tmp () {
rm -rf /tmp/ecm.info /tmp/pid.info /tmp/cardinfo
}
case "$1" in
start)
remove_tmp
/var/bin/oscam &
sleep 15
/var/bin/mgcamd_1.35a &
;;
stop)
touch /tmp/mgcamd_1.35a.kill
sleep 5
killall -9 mgcamd_1.35a oscam 2>/dev/null
sleep 2
remove_tmp
;;
*)
$0 stop
exit 1
;;
esac
exit 0
Not my work - taken from another site. But basically I think he wants to change the cam startup script (I do too)
what about cccam 2.0.11 any ipk plzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz zzzzz
Why do u want to use 2.0.11?
silverfox0786
20-09-11, 22:06
its used for beta tunneling
its been added to the 4shared account
Excellent tutorial - made things allot easier to do - thanks for your help on this one!
Nalareddep
21-09-11, 17:50
It strts by saying You need to access your CCcam.cfg file. Please tell me where to access it? Or do I have to write one?
silverfox0786
21-09-11, 17:51
you need to make yr own and add it to /etc
Nalareddep
21-09-11, 19:15
How do I access my Cccam.cfg file.
I cannot find it and I am confused with the amount of info that is needed to go in it. Are there any simple examples anywhere. I am simply trying to set up my box to use a sky card.
the cfg file is in /etc. If its not there use notepad+++ to create one and than ftp it to the box
also post 34 here will help as well. http://www.world-of-satellite.com/showthread.php?11198-What-happens-if-I-use-a-Sky-Card/page4
Nalareddep
23-09-11, 13:18
I have followed this tutorial but when I get to
'Press "Green" to start CCcam 2.2.1 and it should now be active like below'
I get an error message 'no config files found ,please set up config files first in /etc/CCcam.cfg
I have placed a config file in etc/ which leaves me a tad lost :-(
any and all help appreciated
"
Can u post a screenshot of ur ftp pointing at /etc/CCcam.cfg so we can see how u have name it as it should be CCcam.cfg and not CCcam.cfg.txt as i have seen in the past
Hello People!!
I hope you are all well?
I am totally new .... Brand New and errrrr looking for help or should I say "HELP"....I think they wrote all the Dummy books to help me (least it seems that way).
Hopefully an easy answer to my question below.
First - World of Satellite - Absolutely brilliant! good advice and would recommend to Friends and Family.
I am stuck at the first hurdle - looking at the VIX ccam's list to download ....which one do I download? Is it always the latest one or are they all for different VU+ boxes and I need to find what one I would need for mine? I have a VU+Solo ....
Thank you in advance....
Sanj
silverfox0786
21-10-11, 22:10
just download in yr case
CCcam.2.2.1
Download the exact one that is mentioned in the tutorial. It uses the latest version.
Good evening!
Just loaded vix 2.2 onto my brand new Xtrend ET 5000, and everything´s been peachy except for the mgcamd not working.
It installed right away, and it starts up just fine when rebooted, but I don´t get a picture.
I know with certainty, that my newcamd.list is accurate, so that leaves the mg_cfg.
I´d be ever so grateful, if anyone that got mgcamd working on the Xtrend ould like to share their mg_cfg.
Thank you in advance!
//Korpen
anyone know how to make the mgcamd stay active all the time? i have to restart the cam quite a lot..i dont have the same issue on my other vu+ box it just seems that this one is being very tempremental...must be time of the month for it :D:D
few people have mentioned changing the box type in the mgcamd config file from 00 to 06 i think. i dont use it so not sure but if you do a search on the forum, the information is there
Thanks will give that a go, thick 6 is the dreambox in the config file so maybe better.
thanks as always punisher:thumbsup::thumbsup:
Hi,
Need a hand with this.
Got a Vu+ Solo working very well with CCcam 2.2.1 using the files from this thread. However, I have been recommended by payserver to try Mgcamd for better performance, so I downloaded 1.35a (from page 1 of this thread again) and installed as usual. Put config files [mgcamd config.zip] downloaded from http://www.filecrop.com/mgcamd-config.html in /usr/keys, input server information and changed box type from 00 to 06.
But it doesn't work. Same payserver works fine with CCcam so I can't understand where I'm going wrong?
Many thanks for your help
I have afew questions about the vu+uno . I want to flash it with the latest vix image is there anything i need todo before i flash as i read on another form something about having flash kernal first ? I want to run cccam and mgcamd I know how to install the cams but dont know where to put the c:/n: lines as i have been told they are different config files and dont come with the cams when installed Where can i get both config files and where do i put them. Any help will be greatly appreciated. Thanks
I have afew questions about the vu+uno . I want to flash it with the latest vix image is there anything i need todo before i flash as i read on another form something about having flash kernal first ? I want to run cccam and mgcamd I know how to install the cams but dont know where to put the c:/n: lines as i have been told they are different config files and dont come with the cams when installed Where can i get both config files and where do i put them. Any help will be greatly appreciated. Thanks
you need to go back and read the rules you agreed to when you set up the account.
http://www.world-of-satellite.com/showthread.php?2
3. Emulator config's can be discussed ONLY to use Official subscription cards in a members receiver.
3a. NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN!
Hi,
Need a hand with this.
Got a Vu+ Solo working very well with CCcam 2.2.1 using the files from this thread. However, I have been recommended by payserver to try Mgcamd for better performance, so I downloaded 1.35a (from page 1 of this thread again) and installed as usual. Put config files [mgcamd config.zip] downloaded from http://www.filecrop.com/mgcamd-config.html in /usr/keys, input server information and changed box type from 00 to 06.
But it doesn't work. Same payserver works fine with CCcam so I can't understand where I'm going wrong?
Many thanks for your help
Solved this problem using Mgcamd 1.38 from: http://linuxsat-support.com/mgcamd-files/8085-mgcamd-1-38-a-2.html#post34305
I would recommend these files are added to page 1 of this thread! No need to change box type either, they've fixed this in 1.38.
Hi,
I am trying to get CCcam 2.3.0 from 4shared but it doesn't work. I tried several times but it's really slow and it stops after a little while ( it's still there at 15% after 30 mins) or it stops before it gets to 100%. I tried the torrent file but it doesn't seem to work at all.
Is there another site from where I can download it?
G
I have just tried it this very second and its working fine mate.
I have just tried it this very second and its working fine mate.
I tried it too and this time it worked at the first try. Maybe there was a kink in the 'tubes somewhere (for two days?).
Thanks,
G
hi.
I`m using ET6000.
at first, when I want to connect to my box via filezila it does`n connect.
What is the user and password for my box?I did not edit anything.
Here are the settings which I have assigned...
IP : 192.168.0.9
Subnet : 255.255.255.0
DNS1: 8.8.8.8
DNS2: 4.2.2.4
gateway: is my pc`s ip >> 192.168.0.1
user : root
pass : password ( I even tried empty field )
Port: 21
But in the end it says unable to connect.
Thanks in advanced
Rob van der Does
18-08-12, 06:13
I`m using ET6000. At first, when I want to connect to my box via filezila it does`n connect.
What is the user and password for my box?I did not edit anything.
Here are the settings which I have assigned...
IP : 192.168.0.9
Subnet : 255.255.255.0
DNS1: 8.8.8.8
DNS2: 4.2.2.4
gateway: is my pc`s ip >> 192.168.0.1
user : root
pass : password ( I even tried empty field )
Port: 21
But in the end it says unable to connect.
Default is
User: root
password: empty
If this is on ViX 3.0: I hope you didn't restore settings; as that is invoking exactly that problem.
Thanks Rob.
No I am using OpenPLi latest version.
That problem is solved and it was due to incorrect filezilla settings.
Now my problem is, after installing enigma2-plugin-cams-cccam.2.2_1.0-r0_mipsel from menu/setup/plugins/ install local extentions I don`t see any option to activate in Softcam/CI .Needless to say that I have placed the CCcam.cfg file in var/etc.
I wanted to ask what is the correct format in CCcam.cfg file?
here is mine. Is it correct?
C: server port user pass
C: server port user pass
Rob van der Does
18-08-12, 15:54
CCcam.cfg should be in /etc
And in PLi CCcam should start automatically.
aha.
So in OpenPLi we install cccam2.2.1 and after that we only need to place CCcam.cfg into etc, Just like that?
===========
Mate I want to ask for 2 favors,
1.please share a link for correct cccam 2.2.1 for installation
2.please judge my CCcam.cfg file content.
C: server port user pass
C: server port user pass
is that right?
Rob van der Does
18-08-12, 16:09
So in OpenPLi we install cccam2.2.1 and after that we only need to place CCcam.cfg into etc, Just like that?
Yes.
1.please share a link for correct cccam 2.2.1 for installation
PLi has CCcam in the feeds. That includes a config file with instructions.
aha.
So in OpenPLi we install cccam2.2.1 and after that we only need to place CCcam.cfg into etc, Just like that?
===========
Mate I want to ask for 2 favors,
1.please share a link for correct cccam 2.2.1 for installation
2.please judge my CCcam.cfg file content.
C: server port user pass
C: server port user pass
is that right?
before you post again please bear in mind that we can not and will not help you set up the configuration file for any thing other than a official subscription card, that resides in the actual receiver.
Would you please guide me through this? I`m kinda lost in here.
Where are the so-called FEEDS? I searched the openpli.org and found nothing.
and please tell me what is the correct format of a CCcam.cfg?
is it correct?
C: server port user pass
C: server port user pass
Rob van der Does
18-08-12, 16:26
Would you please guide me through this? I`m kinda lost in here.
Where are the so-called FEEDS? I searched the openpli.org and found nothing.
and please tell me what is the correct format of a CCcam.cfg?
is it correct?
C: server port user pass
C: server port user pass
Applications --> green --> softcams
And again: that includes a config file with instructions.
I know it makes you angry but I did not find this address neither on my BOX nor on Openpli.org
Rob van der Does
18-08-12, 18:14
There's no address; the box downloads the plugins from the feeds.
Go to applications; then push green; that offers a list of installable items.
PS: Box got to be connected to the internet.
18723ok mate,
I worked on it and went forth till I faced this error.
This happened when I chose to install the cams-ccam 2.2 pluign
screenshot is attached.
Rob van der Does
19-08-12, 06:29
Well, tbh: I think you have to ask on the PLi-forum about this. Last time I used PLi it worked fine.
Didn't you try the latest CCcam (vs 2.3.0)?
Edit: I just noticed you already asked on the PLi-forum.
Yes I did dear brother;but look how lucky I am!! They are migrating from their server.
I really got tired of this.Whatever I want to do reaches to a dead end.
OK I got it fixed.
I used OpenPLi online feeds and tried another cccam plugin.
It is working flawlessly now.
Not to forget, I should thank you for your continuous help.
Best Regards.:thumbsup:
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.