Error Message

[GecHo]

i have error message on reboot or when i restart enigma VFD Checker this happened after the box froze when i was moving my dish with the positioner setup afer switching off the box for a few seconds and when turned on it just said booting for more than 5 mins so repeated this 3 times then decided just to leave it and almost 12 min the box came back on with the VFD Checker error, not checked the bootloader or kernel but box was flashed with latest Vix image from sponsor and box is lesss than a week old, is it ok to post the log as text in this thread or zip it up and post
cheers Mick- hope soneone can help dont want to do a full flash :(

sorry if this is posted twice but i thought i posted it earlier but couldnt see it in forums

[GecHo]

any ideas pls let me know
cheers Mick

Jan 1 01:00:26 et9x00 user.info kernel: Bluetooth: Core ver 2.16
Jan 1 01:00:26 et9x00 user.info kernel: NET: Registered protocol family 31
Jan 1 01:00:26 et9x00 user.info kernel: Bluetooth: HCI device and connection manager initialized
Jan 1 01:00:26 et9x00 user.info kernel: Bluetooth: HCI socket layer initialized
Jan 1 01:00:26 et9x00 user.info kernel: Bluetooth: L2CAP socket layer initialized
Jan 1 01:00:26 et9x00 user.info kernel: cfg80211: Calling CRDA to update world regulatory domain
Jan 1 01:00:26 et9x00 user.info kernel: Switching to clocksource upg
Jan 1 01:00:26 et9x00 user.info kernel: NET: Registered protocol family 2
Jan 1 01:00:26 et9x00 user.info kernel: IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
Jan 1 01:00:26 et9x00 user.info kernel: TCP established hash table entries: 16384 (order: 5, 131072 bytes)
Jan 1 01:00:26 et9x00 user.info kernel: TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
Jan 1 01:00:26 et9x00 user.info kernel: TCP: Hash tables configured (established 16384 bind 16384)
Jan 1 01:00:26 et9x00 user.info kernel: TCP reno registered
Jan 1 01:00:26 et9x00 user.info kernel: UDP hash table entries: 256 (order: 1, 8192 bytes)
Jan 1 01:00:26 et9x00 user.info kernel: UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
Jan 1 01:00:26 et9x00 user.info kernel: NET: Registered protocol family 1
Jan 1 01:00:26 et9x00 user.info kernel: RPC: Registered named UNIX socket transport module.
Jan 1 01:00:26 et9x00 user.info kernel: RPC: Registered udp transport module.
Jan 1 01:00:26 et9x00 user.info kernel: RPC: Registered tcp transport module.
Jan 1 01:00:26 et9x00 user.info kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
Jan 1 01:00:26 et9x00 user.debug kernel: PCI: CLS 0 bytes, default 32
Jan 1 01:00:26 et9x00 user.info kernel: fuse init (API version 7.17)
Jan 1 01:00:26 et9x00 user.info kernel: msgmni has been set to 568
Jan 1 01:00:26 et9x00 user.info kernel: io scheduler noop registered
Jan 1 01:00:26 et9x00 user.info kernel: io scheduler cfq registered (default)
Jan 1 01:00:26 et9x00 user.info kernel: fb0: bcmfb frame buffer device
Jan 1 01:00:26 et9x00 user.info kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
Jan 1 01:00:26 et9x00 user.info kernel: serial8250.0: ttyS0 at MMIO 0x10400b00 (irq = 22) is a 16550A
Jan 1 01:00:26 et9x00 user.info kernel: console [ttyS0] enabled, bootconsole disabled
Jan 1 01:00:26 et9x00 user.info kernel: serial8250.0: ttyS1 at MMIO 0x10400b40 (irq = 66) is a 16550A
Jan 1 01:00:26 et9x00 user.info kernel: serial8250.0: ttyS2 at MMIO 0x10400b80 (irq = 67) is a 16550A
Jan 1 01:00:26 et9x00 user.info kernel: loop: module loaded
Jan 1 01:00:26 et9x00 user.debug kernel: sata_brcmstb 0000:01:00.0: version 4.0
Jan 1 01:00:26 et9x00 user.info kernel: brcm-pm: enabling sata clocks
Jan 1 01:00:26 et9x00 user.warn kernel: PCI: Enabling device 0000:01:00.0 (0000 -> 0003)
Jan 1 01:00:26 et9x00 user.debug kernel: PCI: Setting latency timer of device 0000:01:00.0 to 64
Jan 1 01:00:26 et9x00 user.info kernel: scsi0 : sata_brcmstb
Jan 1 01:00:26 et9x00 user.info kernel: scsi1 : sata_brcmstb
Jan 1 01:00:26 et9x00 user.info kernel: ata1: SATA max UDMA7 mmio m4096@0x10510000 port 0x10510000 irq 42
Jan 1 01:00:26 et9x00 user.info kernel: ata2: SATA max UDMA7 mmio m4096@0x10510000 port 0x10510100 irq 42
Jan 1 01:00:26 et9x00 user.info kernel: Broadcom STB NAND controller (BrcmNand Controller)
Jan 1 01:00:26 et9x00 user.info kernel: bcmemac: Broadcom STB 10/100 EMAC driver v3.0
Jan 1 01:00:26 et9x00 user.info kernel: bcmemac: registered interface #0 at 0x10080000 as 'eth0' (00:16:b4:04:61:01)
Jan 1 01:00:26 et9x00 user.info kernel: bcmemac: not registering interface #1 at 0x10090000 (no PHY detected)
Jan 1 01:00:26 et9x00 user.info kernel: usbcore: registered new interface driver zd1201
Jan 1 01:00:26 et9x00 user.info kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Jan 1 01:00:26 et9x00 user.info kernel: brcm-pm: enabling usb clocks
Jan 1 01:00:26 et9x00 user.info kernel: ehci-brcm ehci-brcm.0: Broadcom STB EHCI
Jan 1 01:00:26 et9x00 user.info kernel: ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
Jan 1 01:00:26 et9x00 user.info kernel: ehci-brcm ehci-brcm.0: irq 62, io mem 0x10480300
Jan 1 01:00:26 et9x00 user.info kernel: ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
Jan 1 01:00:26 et9x00 user.info kernel: hub 1-0:1.0: USB hub found
Jan 1 01:00:26 et9x00 user.info kernel: hub 1-0:1.0: 2 ports detected
Jan 1 01:00:26 et9x00 user.info kernel: ehci-brcm ehci-brcm.1: Broadcom STB EHCI
Jan 1 01:00:26 et9x00 user.info kernel: ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2
Jan 1 01:00:26 et9x00 user.info kernel: ehci-brcm ehci-brcm.1: irq 57, io mem 0x10480500
Jan 1 01:00:26 et9x00 user.info kernel: ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00
Jan 1 01:00:26 et9x00 user.info kernel: hub 2-0:1.0: USB hub found
Jan 1 01:00:26 et9x00 user.info kernel: hub 2-0:1.0: 2 ports detected
Jan 1 01:00:26 et9x00 user.info kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Jan 1 01:00:26 et9x00 user.info kernel: ohci-brcm ohci-brcm.0: Broadcom STB OHCI
Jan 1 01:00:26 et9x00 user.info kernel: ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 3
Jan 1 01:00:26 et9x00 user.info kernel: ohci-brcm ohci-brcm.0: irq 63, io mem 0x10480400
Jan 1 01:00:26 et9x00 user.info kernel: hub 3-0:1.0: USB hub found
Jan 1 01:00:26 et9x00 user.info kernel: hub 3-0:1.0: 2 ports detected
Jan 1 01:00:26 et9x00 user.info kernel: ohci-brcm ohci-brcm.1: Broadcom STB OHCI
Jan 1 01:00:26 et9x00 user.info kernel: ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 4
Jan 1 01:00:26 et9x00 user.info kernel: ohci-brcm ohci-brcm.1: irq 64, io mem 0x10480600
Jan 1 01:00:26 et9x00 user.info kernel: ata1: SATA link down (SStatus 4 SControl 300)
Jan 1 01:00:26 et9x00 user.info kernel: hub 4-0:1.0: USB hub found
Jan 1 01:00:26 et9x00 user.info kernel: hub 4-0:1.0: 2 ports detected
Jan 1 01:00:26 et9x00 user.info kernel: Initializing USB Mass Storage driver...
Jan 1 01:00:26 et9x00 user.info kernel: usbcore: registered new interface driver usb-storage
Jan 1 01:00:26 et9x00 user.info kernel: USB Mass Storage support registered.
Jan 1 01:00:26 et9x00 user.info kernel: mousedev: PS/2 mouse device common for all mice
Jan 1 01:00:26 et9x00 user.info kernel: i2c /dev entries driver
Jan 1 01:00:26 et9x00 user.info kernel: lirc_dev: IR Remote Control driver registered, major 254
Jan 1 01:00:26 et9x00 user.info kernel: IR NEC protocol handler initialized
Jan 1 01:00:26 et9x00 user.info kernel: IR RC5(x) protocol handler initialized
Jan 1 01:00:26 et9x00 user.info kernel: IR RC6 protocol handler initialized
Jan 1 01:00:26 et9x00 user.info kernel: IR JVC protocol handler initialized
Jan 1 01:00:26 et9x00 user.info kernel: IR Sony protocol handler initialized
Jan 1 01:00:26 et9x00 user.info kernel: IR RC5 (streamzap) protocol handler initialized
Jan 1 01:00:26 et9x00 user.info kernel: IR MCE Keyboard/mouse protocol handler initialized
Jan 1 01:00:26 et9x00 user.info kernel: IR LIRC bridge handler initialized
Jan 1 01:00:26 et9x00 user.info kernel: Bluetooth: Generic Bluetooth USB driver ver 0.6
Jan 1 01:00:26 et9x00 user.info kernel: usbcore: registered new interface driver btusb
Jan 1 01:00:26 et9x00 user.info kernel: usbcore: registered new interface driver usbhid
Jan 1 01:00:26 et9x00 user.info kernel: usbhid: USB HID core driver
Jan 1 01:00:26 et9x00 user.info kernel: usb 1-1: new high-speed USB device number 2 using ehci-brcm
Jan 1 01:00:26 et9x00 user.info kernel: ALSA device list:
Jan 1 01:00:26 et9x00 user.info kernel: No soundcards found.
Jan 1 01:00:26 et9x00 user.info kernel: TCP cubic registered
Jan 1 01:00:26 et9x00 user.info kernel: NET: Registered protocol family 17
Jan 1 01:00:26 et9x00 user.info kernel: Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Jan 1 01:00:26 et9x00 user.info kernel: lib80211: common routines for IEEE802.11 drivers
Jan 1 01:00:26 et9x00 user.debug kernel: lib80211_crypt: registered algorithm 'NULL'
Jan 1 01:00:26 et9x00 user.info kernel: EBI CS1: setting up NAND flash (primary)
Jan 1 01:00:26 et9x00 user.info kernel: mtd->oobsize=0, mtd->eccOobSize=0
Jan 1 01:00:26 et9x00 user.warn kernel: NAND_CS_NAND_XOR=00000000
Jan 1 01:00:26 et9x00 user.warn kernel: B4: NandSelect=50000200, nandConfig=16152300, chipSelect=1
Jan 1 01:00:26 et9x00 user.warn kernel: brcmnand_read_id: CS1: dev_id=ecda1095
Jan 1 01:00:26 et9x00 user.warn kernel: After: NandSelect=50000200, nandConfig=16152300
Jan 1 01:00:26 et9x00 user.warn kernel: Block size=00020000, erase shift=17
Jan 1 01:00:26 et9x00 user.info kernel: NAND Config: Reg=16152300, chipSize=256 MB, blockSize=128K, erase_shift=11
Jan 1 01:00:26 et9x00 user.info kernel: busWidth=1, pageSize=2048B, page_shift=11, page_mask=000007ff
Jan 1 01:00:26 et9x00 user.warn kernel: timing1 not adjusted: 5363444f
Jan 1 01:00:26 et9x00 user.warn kernel: timing2 not adjusted: 00000fc6
Jan 1 01:00:26 et9x00 user.warn kernel: eccLevel=15, 1Ksector=0, oob=16
Jan 1 01:00:26 et9x00 user.warn kernel: nbrBitsPerCell=2, cellinfo=0, chip->cellinfo=00000000
Jan 1 01:00:26 et9x00 user.warn kernel: <--brcmnand_set_acccontrol: acc b4: d7ff1010, after: d7ff1010
Jan 1 01:00:26 et9x00 user.info kernel: BrcmNAND mfg ec da Samsung K9F2G08U0A 256MB on CS1
Jan 1 01:00:26 et9x00 user.info kernel: Found NAND on CS1: ACC=d7ff1010, cfg=16152300, flashId=ecda1095, tim1=5363444f, tim2=00000fc6
Jan 1 01:00:26 et9x00 user.info kernel: BrcmNAND version = 0x0302 256MB @00000000
Jan 1 01:00:26 et9x00 user.warn kernel: B4: NandSelect=50000200, nandConfig=16152300, chipSelect=1
Jan 1 01:00:26 et9x00 user.warn kernel: brcmnand_read_id: CS1: dev_id=ecda1095
Jan 1 01:00:26 et9x00 user.warn kernel: After: NandSelect=50000200, nandConfig=16152300
Jan 1 01:00:26 et9x00 user.warn kernel: Found NAND flash on Chip Select 1, chipSize=256MB, usable size=256MB, base=0
Jan 1 01:00:26 et9x00 user.warn kernel: brcmnand_scan: B4 nand_select = 50000200
Jan 1 01:00:26 et9x00 user.warn kernel: brcmnand_scan: After nand_select = 50000200
Jan 1 01:00:26 et9x00 user.info kernel: page_shift=11, bbt_erase_shift=17, chip_shift=28, phys_erase_shift=17
Jan 1 01:00:26 et9x00 user.info kernel: Brcm NAND controller version = 3.2 NAND flash size 256MB @10000000
Jan 1 01:00:26 et9x00 user.warn kernel: ECC layout=brcmnand_oob_bch4_4k
Jan 1 01:00:26 et9x00 user.info kernel: brcmnand_scan: mtd->oobsize=64
Jan 1 01:00:26 et9x00 user.info kernel: brcmnand_scan: oobavail=50, eccsize=512, writesize=2048
Jan 1 01:00:26 et9x00 user.info kernel: brcmnand_scan, eccsize=512, writesize=2048, eccsteps=4, ecclevel=15, eccbytes=3
Jan 1 01:00:26 et9x00 user.warn kernel: -->brcmnand_default_bbt
Jan 1 01:00:26 et9x00 user.warn kernel: brcmnand_default_bbt: bbt_td = bbt_main_descr
Jan 1 01:00:26 et9x00 user.debug kernel: Bad block table Bbt0 found at page 0001ffc0, version 0x01 for chip on CS1
Jan 1 01:00:26 et9x00 user.debug kernel: Bad block table 1tbB found at page 0001ff80, version 0x01 for chip on CS1
Jan 1 01:00:26 et9x00 user.warn kernel: Adjust partition complete size from entire device to ff00000 to avoid overlap with BBT reserved space
Jan 1 01:00:26 et9x00 user.warn kernel: Adjust partition rootfs size from entire device to f900000 to avoid overlap with BBT reserved space
Jan 1 01:00:26 et9x00 user.notice kernel: Creating 3 MTD partitions on "brcmnand.0":
Jan 1 01:00:26 et9x00 user.notice kernel: 0x000000000000-0x00000ff00000 : "complete"

[GecHo]

Jan 1 01:00:26 et9x00 user.notice kernel: 0x000000000000-0x000000600000 : "kernel"
Jan 1 01:00:26 et9x00 user.notice kernel: 0x000000600000-0x00000ff00000 : "rootfs"
Jan 1 01:00:26 et9x00 user.notice kernel: UBI: attaching mtd2 to ubi0
Jan 1 01:00:26 et9x00 user.notice kernel: UBI: physical eraseblock size: 131072 bytes (128 KiB)
Jan 1 01:00:26 et9x00 user.notice kernel: UBI: logical eraseblock size: 126976 bytes
Jan 1 01:00:26 et9x00 user.notice kernel: UBI: smallest flash I/O unit: 2048
Jan 1 01:00:26 et9x00 user.notice kernel: UBI: VID header offset: 2048 (aligned 2048)
Jan 1 01:00:26 et9x00 user.notice kernel: UBI: data offset: 4096
Jan 1 01:00:26 et9x00 user.info kernel: ata2: SATA link down (SStatus 4 SControl 300)
Jan 1 01:00:26 et9x00 user.info kernel: scsi2 : usb-storage 1-1:1.0
Jan 1 01:00:26 et9x00 user.info kernel: usb 2-1: new high-speed USB device number 2 using ehci-brcm
Jan 1 01:00:26 et9x00 user.info kernel: hub 2-1:1.0: USB hub found
Jan 1 01:00:26 et9x00 user.info kernel: hub 2-1:1.0: 4 ports detected
Jan 1 01:00:26 et9x00 user.info kernel: usb 2-1.2: new full-speed USB device number 3 using ehci-brcm
Jan 1 01:00:26 et9x00 user.notice kernel: scsi 2:0:0:0: Direct-Access Kingston DataTraveler G3 PMAP PQ: 0 ANSI: 0 CCS
Jan 1 01:00:26 et9x00 user.notice kernel: sd 2:0:0:0: Attached scsi generic sg0 type 0
Jan 1 01:00:26 et9x00 user.notice kernel: sd 2:0:0:0: [sda] 15215808 512-byte logical blocks: (7.79 GB/7.25 GiB)
Jan 1 01:00:26 et9x00 user.notice kernel: sd 2:0:0:0: [sda] Write Protect is off
Jan 1 01:00:26 et9x00 user.debug kernel: sd 2:0:0:0: [sda] Mode Sense: 23 00 00 00
Jan 1 01:00:26 et9x00 user.err kernel: sd 2:0:0:0: [sda] No Caching mode page present
Jan 1 01:00:26 et9x00 user.err kernel: sd 2:0:0:0: [sda] Assuming drive cache: write through
Jan 1 01:00:26 et9x00 user.err kernel: sd 2:0:0:0: [sda] No Caching mode page present
Jan 1 01:00:26 et9x00 user.err kernel: sd 2:0:0:0: [sda] Assuming drive cache: write through
Jan 1 01:00:26 et9x00 user.info kernel: sda: sda1
Jan 1 01:00:26 et9x00 user.err kernel: sd 2:0:0:0: [sda] No Caching mode page present
Jan 1 01:00:26 et9x00 user.err kernel: sd 2:0:0:0: [sda] Assuming drive cache: write through
Jan 1 01:00:26 et9x00 user.notice kernel: sd 2:0:0:0: [sda] Attached SCSI removable disk
Jan 1 01:00:26 et9x00 user.notice kernel: UBI: max. sequence number: 1975
Jan 1 01:00:26 et9x00 user.notice kernel: UBI: attached mtd2 to ubi0
Jan 1 01:00:26 et9x00 user.notice kernel: UBI: MTD device name: "rootfs"
Jan 1 01:00:26 et9x00 user.notice kernel: UBI: MTD device size: 249 MiB
Jan 1 01:00:26 et9x00 user.notice kernel: UBI: number of good PEBs: 1992
Jan 1 01:00:26 et9x00 user.notice kernel: UBI: number of bad PEBs: 0
Jan 1 01:00:26 et9x00 user.notice kernel: UBI: number of corrupted PEBs: 0
Jan 1 01:00:26 et9x00 user.notice kernel: UBI: max. allowed volumes: 128
Jan 1 01:00:26 et9x00 user.notice kernel: UBI: wear-leveling threshold: 4096
Jan 1 01:00:26 et9x00 user.notice kernel: UBI: number of internal volumes: 1
Jan 1 01:00:26 et9x00 user.notice kernel: UBI: number of user volumes: 1
Jan 1 01:00:26 et9x00 user.notice kernel: UBI: available PEBs: 0
Jan 1 01:00:26 et9x00 user.notice kernel: UBI: total number of reserved PEBs: 1992
Jan 1 01:00:26 et9x00 user.notice kernel: UBI: number of PEBs reserved for bad PEB handling: 19
Jan 1 01:00:26 et9x00 user.notice kernel: UBI: max/mean erase counter: 3/1
Jan 1 01:00:26 et9x00 user.notice kernel: UBI: image sequence number: 772204523
Jan 1 01:00:26 et9x00 user.notice kernel: UBI: background thread "ubi_bgt0d" started, PID 43
Jan 1 01:00:26 et9x00 user.notice kernel: UBIFS: mounted UBI device 0, volume 0, name "rootfs"
Jan 1 01:00:26 et9x00 user.notice kernel: UBIFS: file system size: 248619008 bytes (242792 KiB, 237 MiB, 1958 LEBs)
Jan 1 01:00:26 et9x00 user.notice kernel: UBIFS: journal size: 9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
Jan 1 01:00:26 et9x00 user.notice kernel: UBIFS: media format: w4/r0 (latest is w4/r0)
Jan 1 01:00:26 et9x00 user.notice kernel: UBIFS: default compressor: lzo
Jan 1 01:00:26 et9x00 user.notice kernel: UBIFS: reserved for root: 0 bytes (0 KiB)
Jan 1 01:00:26 et9x00 user.info kernel: VFS: Mounted root (ubifs filesystem) on device 0:12.
Jan 1 01:00:26 et9x00 user.info kernel: Freeing unused kernel memory: 252k freed
Jan 1 01:00:26 et9x00 user.info kernel: EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Jan 1 01:00:26 et9x00 user.info kernel: usbcore: registered new interface driver tpm
Jan 1 01:00:26 et9x00 user.warn kernel: modloader: module license 'PROPRIETARY' taints kernel.
Jan 1 01:00:26 et9x00 user.warn kernel: Disabling lock debugging due to kernel taint
Jan 1 01:00:26 et9x00 user.warn kernel: dvb: module_layout: kernel tainted.
Jan 1 01:00:26 et9x00 user.info kernel: input: dreambox remote control (native) as /devices/virtual/input/input0
Jan 1 01:00:26 et9x00 user.info kernel: input: dreambox advanced remote control (native) as /devices/virtual/input/input1
Jan 1 01:00:26 et9x00 user.info kernel: DVB: registering new adapter (dvb0)
Jan 1 01:00:26 et9x00 user.warn kernel: DVB: registering adapter 0 frontend 0 (DVB-S2)...
Jan 1 01:00:26 et9x00 user.warn kernel: DVB: registering adapter 0 frontend 1 (DVB-S2)...
Jan 1 01:00:26 et9x00 user.info kernel: input: front panel as /devices/virtual/input/input2
Jan 1 01:00:26 et9x00 user.info kernel: NET: Registered protocol family 5
Jan 1 01:00:26 et9x00 user.info kernel: usbcore: registered new interface driver ath9k_htc
Jan 1 01:00:26 et9x00 user.info kernel: usbcore: registered new interface driver usbserial
Jan 1 01:00:26 et9x00 user.info kernel: USB Serial support registered for generic
Jan 1 01:00:26 et9x00 user.info kernel: usbcore: registered new interface driver usbserial_generic
Jan 1 01:00:26 et9x00 user.info kernel: usbserial: USB Serial Driver core
Jan 1 01:00:26 et9x00 user.info kernel: USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter
Jan 1 01:00:26 et9x00 user.info kernel: usbcore: registered new interface driver belkin
Jan 1 01:00:26 et9x00 user.info kernel: belkin_sa: v1.3:USB Belkin Serial converter driver
Jan 1 01:00:26 et9x00 user.info kernel: usbcore: registered new interface driver carl9170
Jan 1 01:00:26 et9x00 user.info kernel: USB Serial support registered for FTDI USB Serial Device
Jan 1 01:00:26 et9x00 user.info kernel: usbcore: registered new interface driver ftdi_sio
Jan 1 01:00:26 et9x00 user.info kernel: ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
Jan 1 01:00:26 et9x00 user.info kernel: NET: Registered protocol family 10
Jan 1 01:00:26 et9x00 user.info kernel: USB Serial support registered for Keyspan - (without firmware)
Jan 1 01:00:26 et9x00 user.info kernel: USB Serial support registered for Keyspan 1 port adapter
Jan 1 01:00:26 et9x00 user.info kernel: USB Serial support registered for Keyspan 2 port adapter
Jan 1 01:00:26 et9x00 user.info kernel: USB Serial support registered for Keyspan 4 port adapter
Jan 1 01:00:26 et9x00 user.info kernel: usbcore: registered new interface driver keyspan
Jan 1 01:00:26 et9x00 user.info kernel: keyspan: v1.1.5:Keyspan USB to Serial Converter Driver
Jan 1 01:00:26 et9x00 user.info kernel: USB Serial support registered for pl2303
Jan 1 01:00:26 et9x00 user.info kernel: usbcore: registered new interface driver pl2303
Jan 1 01:00:26 et9x00 user.info kernel: pl2303: Prolific PL2303 USB to serial adaptor driver
Jan 1 01:00:26 et9x00 user.warn kernel: r8712u: module is from the staging directory, the quality is unknown, you have been warned.
Jan 1 01:00:26 et9x00 user.info kernel: usbcore: registered new interface driver r8712u
Jan 1 01:00:26 et9x00 user.info kernel: usbcore: registered new interface driver rt2500usb
Jan 1 01:00:26 et9x00 user.info kernel: usbcore: registered new interface driver rt2800usb
Jan 1 01:00:26 et9x00 user.info kernel: usbcore: registered new interface driver rt73usb
Jan 1 01:00:26 et9x00 user.info kernel: usbcore: registered new interface driver rtl8187
Jan 1 01:00:26 et9x00 user.warn kernel: rtw driver version=v3.3.0_2971.20111128
Jan 1 01:00:26 et9x00 user.info kernel: usbcore: registered new interface driver rtl8192cu
Jan 1 01:00:26 et9x00 user.info kernel: usbcore: registered new interface driver zd1211rw
Jan 1 01:00:26 et9x00 user.info kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Jan 1 01:00:26 et9x00 user.warn kernel: svc: failed to register lockdv1 RPC service (errno 124).
Jan 1 01:00:26 et9x00 daemon.info avahi-daemon[455]: Found user 'avahi' (UID 101) and group 'avahi' (GID 1002).
Jan 1 01:00:26 et9x00 daemon.info avahi-daemon[455]: Successfully dropped root privileges.
Jan 1 01:00:26 et9x00 daemon.info avahi-daemon[455]: avahi-daemon 0.6.25 starting up.
Jan 1 01:00:27 et9x00 daemon.err avahi-daemon[455]: Failed to chroot(): Permission denied
Mar 1 10:18:44 et9x00 daemon.notice ntpdate[363]: step time server 81.171.44.131 offset 1330597091.957180 sec
Mar 1 10:19:13 et9x00 cron.err crond[396]: time disparity of 22176618 minutes detected
Mar 1 10:19:18 et9x00 daemon.debug CCcam: ================================================== ====================
Mar 1 10:19:18 et9x00 daemon.debug CCcam: starting CCcam 2.1.4 compiled on Jan 30 2010@16:28:03
Mar 1 10:19:18 et9x00 daemon.debug CCcam: ================================================== ====================
Mar 1 10:19:18 et9x00 daemon.debug CCcam: online using nodeId ac77fe953dd29a8d
Mar 1 10:19:19 et9x00 daemon.debug CCcam: readKeyfile: cannot open /var/keys/SoftCam.Key or not found
Mar 1 10:19:19 et9x00 daemon.debug CCcam: readKeyfile: cannot open /var/keys/AutoRoll.Key or not found
Mar 1 10:19:19 et9x00 daemon.debug CCcam: static cw not found or bad
Mar 1 10:19:24 et9x00 daemon.debug CCcam: server started on port 12000
Mar 1 10:19:25 et9x00 daemon.debug CCcam: EMM: not interested in 0960:000000
Mar 1 10:19:25 et9x00 daemon.debug CCcam: EMM: not interested in 0961:000000
Mar 1 10:19:25 et9x00 daemon.debug CCcam: EMM: not interested in 0963:000000
Mar 1 10:20:35 et9x00 daemon.debug CCcam: EMM: not interested in 0960:000000
Mar 1 10:20:35 et9x00 daemon.debug CCcam: EMM: not interested in 0961:000000
Mar 1 10:20:35 et9x00 daemon.debug CCcam: EMM: not interested in 0963:000000
Mar 1 10:21:59 et9x00 user.debug kernel: out of order segment: rcv_next 4BC09EB6 seq 4BC09FB3 - 4BC0A55B
Mar 1 10:21:59 et9x00 user.debug kernel: ofo requeuing : rcv_next 4BC09FB3 seq 4BC09FB3 - 4BC0A55B
Mar 1 10:24:53 et9x00 user.info kernel: warning: `vsftpd' uses 32-bit capabilities (legacy support in use)
Mar 1 10:31:17 et9x00 daemon.debug CCcam: EMM: not interested in 0960:000000
Mar 1 10:31:17 et9x00 daemon.debug CCcam: EMM: not interested in 0961:000000
Mar 1 10:31:17 et9x00 daemon.debug CCcam: EMM: not interested in 0963:000000
Mar 1 10:32:09 et9x00 daemon.info init: Switching to runlevel: 4
Mar 1 10:32:14 et9x00 daemon.info init: Switching to runlevel: 3
Mar 1 10:32:46 et9x00 daemon.debug CCcam: EMM: not interested in 0960:000000
Mar 1 10:32:46 et9x00 daemon.debug CCcam: EMM: not interested in 0961:000000
Mar 1 10:32:46 et9x00 daemon.debug CCcam: EMM: not interested in 0963:000000

[GecHo]

33 ppl viewed my post and not one reply,,, dont you like me or something lol

[Sicilian]

33 ppl viewed my post and not one reply,,, dont you like me or something lol

It's because no one understands your issue. What plugins had you installed?

In all honesty you prob best just re-flashing latest VIX image VIX 2.3.204 last image in this thread http://www.world-of-satellite.com/showthread.php?13651-ViX-Team-ET9x00-Image-v2-3-Image-Release-s

[GecHo]

lasst option a agree but surely the developers must understand the log and hasve some idea what to. all i have installed in the last few days was 2.0.1 CCcam and this dont show up in cams but is visible to uninstall,, thats it
but thanks for the reply

and cant get rid of bloody subtitles on some channels even though they are turned off in options and this is on sly uk so wouldnt imagine a 2 year old films have hardcore subs and sure thats not the case,,, all this said im still loving the box and vix image :~)

[Zartmy]

lasst option a agree but surely the developers must understand the log and hasve some idea what to. all i have installed in the last few days was 2.0.1 CCcam and this dont show up in cams but is visible to uninstall,, thats it
but thanks for the reply


You are talking about an error message, your posting the normal kernel boot log. And the only log message that is of err level is when the kernel inits your disks and tells about the cache - but thats just normal behaviour.

So what is the error message?