View Full Version : TM 800 hd startup problems
I have had the tm 800 hd since nov 2011.
Yesterday i had to turn the box off at the back with the switch and turn it on ,it just goes to the tecnomate logo.
Can you please help.
Thank you
Do not post invoice details from our sponsor.
I would re-flash the unit with latest image, how to flash via USB http://www.world-of-satellite.com/showthread.php?6938-How-to-USB-flash-TM800-HD
Latest image here
http://download.for-better.biz/bbs/list.php?board=tm800hd
To Sicilian
Thank you very much for youre help.
Working fine now.
Regards
Love
Hi
Spoke to soon the fault has returned.
I have tried flashing the box with latest image.
I formatted the USB to Fat 32 and loaded the new image.
Unfortunately the box cannot read the USB.
Any more sugestions welcome.
Thank you
make sure it's named TM800_update.bin to the root of the USB
Hi
Still have same problem, i havent been able to use stb for days.
Have you anymore sugestions please.
Or is it time to take it back.
Thank you
Please explain what is happening when you try to re-flash the receiver.
What happens at each stage?
1. Format a USB stick FAT32.
2. Download image from here http://www.world-of-satellite.com/fo...-800-HD-images (http://www.world-of-satellite.com/forumdisplay.php?110-Technomate-TM-800-HD-images)
3. Extract image to root of the USB stick and rename to TM800_update.bin
4. Power off TM-800 and connect USB stick to front or rear USB port.
5. Power on using rear power switch and REPEATEDLY press the Standby button front of the receiver.
6. When miniroot shows stop pressing standby button.
7. When IP shows press menu and the you will see the progress of the flash on the front screen. When finished the receiver will automatically reboot.
Hi
I have done exactly as you sugested
thank you
Hi
I have done exactly as you sugested
thank you
and what is the outcome? working again?
Can you please explain which stage isn't working?
For instance when you power on with the USB stick connected to USB port and power on whilsed repeatedly pressing standby button far left are you getting Miniroot appear on screen?
You need to give info as to what is not working.
1/receiver off
2/connect usb stick {tm 800-update.bin} this is the file in usb stick
3/power receiver on from rear switch on whilest repeatedly pressing SMALL blacK standby button
4/It just goes to the tecnomate logo.
I have done this at least 100 times.
Read the instructions carefully. If the receiver is going straight to Techomate logo on front screen you are NOT following instructions.
1. Format a USB stick FAT32.
2. Download image from here http://www.world-of-satellite.com/fo...-800-HD-images (http://www.world-of-satellite.com/forumdisplay.php?110-Technomate-TM-800-HD-images)
3. Extract image to root of the USB stick and rename to TM800_update.bin
4. Power off TM-800 and connect USB stick to front or rear USB port.
5. Power on using rear power switch and REPEATEDLY press the Standby button front of the receiver.
6. When miniroot shows stop pressing standby button.
7. When IP shows press menu and the you will see the progress of the flash on the front screen. When finished the receiver will automatically reboot.
Hi
I have followed the instractions
I have done this a few times before without any problems
Hi
I have followed the instractions
I have done this a few times before without any problems
Have you tried a different USB stick? Also do not repeatedly press the standby button too fast, slowly repeating is normaly enough.
I have done that
Is there a way to factory reset the stb
I'd send the sponsor an email via contact button on their shop.
I think its about time
Thank you very much for youre help
tm 800 hd working.
Problem was the power supply.
Thanks to all at technomte,very helpful fantastic service.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.