PDA

View Full Version : SRG Suisse Viaccess Sat Access Card and ET 5000 : HELP


premiumtaste
26-01-12, 13:06
Hello users,

14271

ich habe eine Sat access Karte und eine ET5000.
Ich wollte wissen wie es jetzt weiter geht.
hab den clarke-xtrend-support image v3 auf meiner ET5000
und habe CCCAM 2.3.0 heruntergeladet aber trotzdem funktioniert es nicht.
Ich habe die Karte reingesteckt dass so der Chip nach unten ist.
Ich brauche Hilfe Leute!
Danke im Voraus

in English:
I have the sat access card and a ET5000.
I have a clarke-xtrend support image v3 on my et5000
und downloaded and installed cccam2.3.0, however this card still does not work.
I inserted this card into the card reader of my et5000 so that the chip faces downloads.
I need some help.
Thank you
pooface
26-01-12, 14:05
Hello users,

14271

ich habe eine Sat access Karte und eine ET5000.
Ich wollte wissen wie es jetzt weiter geht.
hab den clarke-xtrend-support image v3 auf meiner ET5000
und habe CCCAM 2.3.0 heruntergeladet aber trotzdem funktioniert es nicht.
Ich habe die Karte reingesteckt dass so der Chip nach unten ist.
Ich brauche Hilfe Leute!
Danke im Voraus

in English:
I have the sat access card and a ET5000.
I have a clarke-xtrend support image v3 on my et5000
und downloaded and installed cccam2.3.0, however this card still does not work.
I inserted this card into the card reader of my et5000 so that the chip faces downloads.
I need some help.
Thank you

That is a viaccess card, am I correct?

What happens if you go to the webif of you box for cccam?

i.e. http://192.168.0.10:16001 (unless you changed default port, and substituting with ip address of your receiver)?
silverfox0786
27-01-12, 02:34
viacess might be easier using in oscam

im using viacess on oscam very nicely no probs at all
premiumtaste
27-01-12, 06:40
do you mean on your ET5000? It works? with which OSCAM did you try? I tried CCAM2.3.0 to get viaaccess card working on et5000.
No success.
Sicilian
27-01-12, 06:48
Has the card been activated?

Card is a SRG Suisse card, will change title. CCcam conflicting reports about it updating. Oscam should be ok.


http://www.oscamconfigs.info/category/sry-suisse-card/
silverfox0786
27-01-12, 16:58
do you mean on your ET5000? It works? with which OSCAM did you try? I tried CCAM2.3.0 to get viaaccess card working on et5000.
No success.

i've tried teh card on an et9000 via oscasm and works fine but it resides else where at the moment again in oscam
Spoof
05-02-12, 15:33
Card should work no problem with cccam. If you are connected then you might have to modify your cfg file to stop it asking for that service.
Note, cccam (probably) won't update the card - you need scam for that.
premiumtaste
06-02-12, 12:18
Spoof. I have tried with scam to get an update for my viaaccess card on my et5000. However it doesn't work after 1 hour of just keeping the card inside the card reader. Could anyone tell me how to get an automatic update for my viaaccess card on my ET5000?
Thank you in advance.
Spoof
07-02-12, 16:59
Spoof. I have tried with scam to get an update for my viaaccess card on my et5000. However it doesn't work after 1 hour of just keeping the card inside the card reader. Could anyone tell me how to get an automatic update for my viaaccess card on my ET5000?
Thank you in advance.


If Scam doesn't do it, then nothing will. I found Scam even more reliable that my red Viacess cam - have you tried an actual cam?
Sometimes your package requires you to go to a specific channel.
Is this an official card and not a Dragon card or whatever they're called?