FAO ukdirtyboy

[Larry-G]

on my travels i found this thread which may help you with you problem

------------


1) boot your VU+ in the bootconsole (with serial cable, press Ctrl+c to stop the bootsequence)
2) copy this command to the console and press enter:
code:


boot -z -elf flash0.kernel: 'rootfstype=jffs2 root=/dev/mtdblock0 rw mem=0x8000000 bcmrac=3`


3) your box should boot from flash
4) open a telnet session and enter this command:
code:


flash_eraseall /dev/mtd5


5) reboot your box with this command:


reboot -f

That's all. I hope you get your box back running.

[ukdirtyboy]

Will give it a go tomorrow cheers

[ukdirtyboy]

no output at all in the console window using putty telnet etc its like its dead
tried 3 null modem cables all workers on three pc's all give no output to windows
check out my video
http://youtu.be/GaFLTzCY34E

[marty]

I don't know if its any help but I've had various things in the past and it only worked if you start the program 1st then turn the box on.
I notice your duo is already on when you try to connect.

[ukdirtyboy]

tried bud but thanks
when videoing ya mess ya order up a bit be same results do same thing with my tm600 and it works

[tagteam3283]

have u tried flashing with an earlier version image? say 1.3?

i ahve a dou and two solos.

my dou wokred fine but no matter what i try i cant get the solos bootloader to flash. i think there is deffo summit up

[ukdirtyboy]

the box has now been returned to world of satellite via the guy i got it from for repair or exchange as it was dead/bricked
i hope it will not be long now :)

[khan]

looks like thats the route my box is going to take.
i hope vu people come up with some means of fixing this type of problem,
just because the box has not been down it does not mean it will never go down.