View Full Version : DM7020HD New Hardware Drivers OE 1.6
02-11-2011
dreambox-dvb-modules.bb: update dm7020hd hardware drivers
- fixed tuner B problems
- fixed 1080p23/p24/p30 support (via autores)
- fixed power LED handling (like dm8000 now)
- dont allow to allocate a demux pid filter for fake pid 0x2000
http://sources.dreamboxupdate.com/opendreambox/1.6/dm7020hd/experimental/dm7020hd/dreambox-dvb-modules_2.6.18-7.4-dm7020hd-20111102-r0_dm7020hd.ipk
DM7020HD New Hardware Drivers 09-11-2011
dreambox-dvb-modules.bb: update dreambox hardware drivers
dm800/dm8000:
- fixed sometimes inoperable hdmi audio after code change to AAC/MP3
dm7020hd:
- fixed bcm4505 tuner detection problems on boot from deep standby
- fixed support for high bitrate transponders (no CI support yet)
all:
- dont allow to allocate a demux pid filter for fake pid 0x2000
- fixed inoperable AUDIO button on DM7020HD remote control (dip switch depending)
- optimized blindscan (ignore duplicate found TPs, low SR crash)
dreambox-dvb-modules.bb: update dm7020hd hardware drivers
- added CI support for high bitrate transponders
02-02-2012
update dreambox hardware drivers
- cxd1981(hybrid DVB-C/-T) increased max. frequency to 900Mhz
- cxd1981(hybrid DVB-T) fixed ineffective 5V for active antennas after mode change
- bcm4505/6 improved receiption sensitivity (fixes problems with small dishes since blindscan support)
dm500hd,dm800se,dm7020hd: fixed audio volume boost on alsa playback
dm7020hd:
- fixed frequently "error code 0x18006" messages on bootup
10-02-2012
update dm7020hd hardware drivers
- fixed strange aliasing noise on PCM Playback with needed upsampling
- finally fixed hybrid DVB-C/-T Tuner 5V output for active antennas
- don't fallback to DVI when the HDMI EDID was not readable
(this fixes some HDMI audio/video problems)
updated hardware drivers 16.02.2012
update dm500hd, dm800se, dm8000, dm7020hd and dm800 hardware drivers
- fixed overflow on aspect ratio calculation
this fixes possible wrong scaled content
- fixed scale factor calculation for dm800
i.e. fixes wrong scaled IPTV services
- fixed non transparent framebuffer after bootup
this fixes not visible bootlogo before e2 starts on dm800
update dreambox hardware modules for dm500hd, dm800se, dm7020hd, dm8000
reverted: "fixed strange aliasing noise on PCM Playback with needed upsampling" change from 20120210 drivers
Update Driver 3.2.3
dreambox-dvb-modules: update OE1.6 dreambox hw drivers
- fixed not working "dm7020hd" remote control with dm800se and dm500hd after fp update
- fixed demux bug
- small CI fix
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.